Established in 2000, we’re amongst the leading tilers in Dublin. Consistency and quality are at the core of everything we do, enabling us to become amongst the most trustworthy tiling companies in Dublin.

With decades of tiling experience, our vibrant group have satisfied virtually every tiling demand imaginable, building lasting relationships with a host of customers & suppliers and crafting a service unlike any tiling business in Dublin. From small works to large-scale tasks, we position consumer satisfaction and efficiency above all else, guaranteeing we provide on-time, in spending plan and to a high requirement.

How to tile a wall


Produce a sensational wall with attractive, practical and durable wall tiles

tiler dublin
Tiling is a proficient task but we’re here to help you get the best finish to your wall tiles. Whether you’re tiling an entire restroom, a shower cubicle, a splashback in a kitchen or a little area around a fireplace, our advice will help you achieve a terrific result.
Prior to you start, it is necessary to prepare your tiling. Calculating the number of tiles & adhesive you need, planning and preparing the wall out the position of the tiles are all necessary factors. Our guide to preparing your wall tiles covers all you require to know before tiling.
This guide will stroll you through how to lay the tiles. In our example we’re tiling an entire wall with square tiles in a direct tiling style. We’ll discuss how to:

  • Fix entire tiles to a wall
  • Cut tiles for corners and barriers and apply corner tile trim
  • Grout and finish wall tiles
  • Seal around the edges of tiling


Tools & Materials




  • Wall tiles
  • Filler – if you have any holes in the wall that need filling. We recommend getting a professional to make the repair work if the hole in the wall is bigger than the size of your fist.
  • Tile adhesive – we advise ready-mixed tile adhesive to save time
  • Tile spacers
  • Sanitary sealant – we suggest anti-mould sealant for a finish that lasts
  • Grout – we encourage ready-mixed grout
  • Multi-purpose clothes
  • Tile trim – as required.




  • Guideline
  • Tape measure
  • Chinagraph pencil or felt-tip pen – if needed, to mark tiles for cutting
  • Trowel
  • Notched trowel (also called a notched spreader).
  • Tile cutter.
  • Tile file – if needed.
  • Hacksaw – if needed, to cut the tile trim.
  • Grout spreader (also called a grout float).
  • Grout finisher (also called a grout shaper).
  • Claw hammer.
  • Sponge.
  • Bucket.
  • Level.
  • Cartridge gun – if needed. Some sealant comes as a trigger gun and doesn’t need a cartridge weapon. Inspect the item instructions for the sealant.
  • Sealant smoother.


Safety set.


  • Security gloves.
  • Dust mask.





  • When cutting tiles, wear safety goggles and a dust mask to protect you from flying pieces and sharp edges.


How to tile a whole wall.

As soon as you’ve prepared the tiles, prepared the wall and repaired your wood battens, lay entire tiles initially by following these actions.

wall tiling step 1


Action 1.

Scoop up some tile adhesive with the trowel and press it onto the wall, beginning in the corner formed by the timber battens. Spread it with the notched trowel, working away from the corner with horizontal strokes. Hold the edge of the notched trowel at an angle of about 45 °. The ridges in the adhesive will guarantee there’s an equal amount behind each tile, making it much easier to get them all level. Attempt not to work on more than one square metre at a time, as the adhesive might begin hardening before you have actually put all the tiles in place.
Pick an ideal tile adhesive for your tiles: for ceramic tiles utilize a ready-mixed tile adhesive or powder adhesive and a powder tile adhesive for porcelain tiles.
Apply adhesive to the wall and also on the back of the tiles if your tiles are larger than 20 x 20.


Step 2.

Place your first tile into the corner, pressing its edges against the corners and the whole tile firmly versus the wall. Include a tile above it and one next to the original tile pressing them securely into the adhesive utilizing a twisting action.
If you let it dry it’ll be really challenging to take off, clean off any adhesive from the tiles with a wet sponge as you go–.
Top pointer – applying mosaic tiles.
When applying mosaic tiles to the wall, hold a piece of board over the tiles while the adhesive is wet and tap the board lightly with a rubber mallet. This will offer the tiles a flat, even finish.
Some mosaics are set at different heights, in which case you must use your hand to guarantee they’re all separately bedded into the adhesive.

Action 3.

Put tile spacers into the corners between the tiles and change the tile positions as and when required. Push them in firmly and place them flush against the wall so you can grout over them.

Step 4.

Add another tile above the last one you applied, and another beside it. Continue using the entire tiles in this way until you’ve tiled the area covered with tile adhesive.
Apply another square metre of adhesive and tiles until you have actually repaired all the whole tiles.
At the edges of the wall, put one leg of the spacer between the tiles so the rest is sticking out– we’ll eliminate this later before grouting.

Step 5.

Leave to dry for the length of time directed on the tile adhesive directions.

Step 6.

Eliminate the vertical lumber batten by prising out it’s nails with the claw of a hammer.

Action 7.

Fix whole tiles to the other area of the wall, starting from the corner next to the tiles you’ve currently fixed.

Step 8.

As soon as all the whole tiles have actually been fixed and are dry, get rid of the horizontal timber batten.
Now you’ve fixed all of the whole tiles, you’re ready to fill the edges and corners of the wall. Head to ‘How to tile corners’ to find out how to do this.

How to tile corners.

In this area, we’ll talk you through tiling corners. There are two types of corner– external and internal. These could be corners created by corners or walls produced by blockages:.

Internal corner.

The corner sign up with in between two walls, for example the corner of a space, or the corner produced by a door frame.

External corner.

Outward-facing corner that extends into the space, for instance the corner of a feature wall or the edge of a window recess.
There’s a different method for tiling depending on the kind of corner, and we’ll describe both techniques in this section.
In some cases you might discover that you can fit entire tiles across the wall without needing to cut a tile for the corner. If no cuts are required, jump to the section ‘How to end up and grout wall tiles’.
You’ll require to cut a tile to fit into the corner.

How to determine and mark tiles for cutting.

There are two methods to measure and mark a tile for cutting:.

Option 1.

Hold the tile you’ll be cutting over the last entire tile in the row. Fit another against the wall and mark where it overlaps the one listed below with a tile scribe, chinagraph pencil or felt-tip pen.

Option 2.

Take separate measurements at the top and bottom of the space you’re going to fill utilizing a tape measure. Mark the measurements at the top and bottom of the tile. Line up the square with the two marks and draw the line between them with a pencil or felt-tip pen, providing you a vertical line to cut along.
With the marks made, it’s time to cut the tiles. Head to our How to cut tiles article for recommendations on this.

Action 1.

After you’ve cut the tile, check to see that it fits. , if you require to make any little changes utilize a tile file..
You don’t have to be absolutely accurate as the edges will be hidden by the tiles on the other wall if you’re also going to tile the nearby wall.

How to tile internal corners.


Step 1.

After you have actually cut the tile, check to see that it fits. If you require to make any little changes use a tile file. If you’re likewise going to tile the adjacent wall, you don’t need to be totally precise as the edges will be hidden by the tiles on the other wall.

Step 2.

Utilize the narrow end of a notched spreader to put adhesive on the back of the cut tile. Press it into place so it’s level with the surrounding tile. Use spacers if you need to.

Action 3.

Relocation on to the next wall if you’re tiling more than one wall. If not, you’re ready to begin grouting and ending up the tiles. For guidance on this, jump to our area ‘How to complete and grout wall tiles’.

How to tile external corners.

Use tile trims to get a neat surface on external corners. It likewise assists to safeguard the edges of the tiles from knocks, which might chip them. The trim can be found in a series of materials, shapes, sizes and colours. Here we’re utilizing white 1/4 inch external edge tile trim.

Step 1.

Finish tiling your very first wall.

Step 2.

Utilize a tape measure to determine the length of the edge that you’ll be repairing the tile trim to.

Step 3.

Measure the tile trim to the same size and make a mark on it to show where to cut. Utilize a hacksaw to cut the tile trim to the length you require.

Step 4.

Add a narrow strip of tile adhesive to the untiled wall using the notched trowel and press the trim into it.

Step 5.

Line the trim up with the tiles of your very first wall. Put 2 spacers in between the trim and each tile (one near the top of the tile and one near the bottom) to ensure there’s a space for grout.

Step 6.

Put more tile adhesive on the untitled wall with the notched trowel. Add the adhesive vertically from top to bottom to avoid knocking the tile trim out of place with the teeth of the notched trowel.

Step 7.

Start tiling your second wall, working far from the corner trim. As you set the tiles in place, keep in mind to enable a narrow grouting space between them and the trim. Insert spacers and adjust the tiles as you go, so the space remains the very same and the trim remain in place.

How to grout and finish wall tiles.

When the tiles are repaired in place and the adhesive has dried, it’s time to apply the grout.

Step 1.

Get rid of the protruding tile spacers at the edges of the wall and at corners.

Action 2.

Starting in the bottom left corner, press a percentage of grout onto the face of the tiles with a trowel.
Utilize a grout spreader, likewise referred to as a grout float, to spread it, making long, diagonal strokes and working it into the joints in between tiles. Continue until you’ve grouted all the joints. The grout will quickly start to solidify, so do this as quick as you can.
If you’re grouting a big location, split it into areas and grout a section at a time. This is to avoid the grout hardening excessive whilst you finish grouting the whole location.

Action 3.

Right away after you finish using the grout, review the tiles with a damp sponge (however not too damp as this might trigger discolouration) to eliminate any excess. Make sure not to drag any grout from the joints.

Step 4.

Leave the grout to dry. As it does, you’ll notice a grainy movie appear on the tiles from all the sponging. Clean this off with a soft, clean fabric.

How to seal around the edge of tiling.

Sealing around the edge of tiling is vital to stop water supporting the tiles, especially around worktops, basins and cooking area sinks. Water behind tiles can trigger damage to the wall, fittings and fixtures. We’ll talk you through sealing the edge of tiling with sanitary sealant.

Step 1.

Attach the nozzle to the sealant and cut off the pointer, as directed by the item guidelines. If required, put the sealant into the cartridge weapon.

Step 2.

Run a constant bead of sealant, working from one end of the tiled area to the other, from left to. When you’re doing this, attempt to keep a stable pressure on the trigger of the gun and a constant speed.

Action 3.

Smooth any abnormalities in the shape of the bead with a sealant smoother (or a wet finger), however make sure not to pull the sealant from the surface area.

Step 4.


Leave the sealant to dry.

Computing the number of tiles & adhesive you require, preparing and preparing the wall out the position of the tiles are all essential aspects. Our guide to planning your wall tiles covers all you need to know before tiling.

In our example we’re tiling a whole wall with square tiles in a linear tiling style. If you’re also going to tile the surrounding wall, you don’t have to be totally precise as the edges will be concealed by the tiles on the other wall.
Start tiling your second wall, working away from the corner trim.

Modern Tiling Videos



Learn More About Tiling



Related Articles



Modern Tiling Services



Around the Web


Call Now Button