WHY CHOOSE ModernTiling

There are numerous tiling business in Dublin, but it’s constantly the most essential to trust and choose. Your single click when browsing for “regional tilers near me” online or calling someone over the phone can help you find a tiler in Dublin. Picking the ideal tiling system in Dublin can be a difficult job.

We are a qualified and certified tiling company in Dublin. Having several years of experience and experienced commercial tilers in Dublin, we can mesmerize the look of your location with our beautiful ceramic tiles.

How to Prepare a Wall for Tiling (Top + detailed Tips).

tilers

Preparing your walls for a fresh wall tile installation is basic and hassle-free with our no-nonsense guide ready.

You can install new tiles on different surfaces, as long you prepare the wall appropriately. Just make certain the surface area is level enough, and dust and dirt-free– and that there are no indications of residual wetness. When correct preparation is done, you can quickly apply adhesive and stick your fresh tiles straight onto the wall.

How to prepare for tiling a wall:.

  • Get rid of old fittings, such as pins, screws, rivets etc
  • Repair or eliminate unfit plaster.
  • Get rid of or pre-treat wallpaper (if present).
  • Fix any cracks or signs of damage.
  • Level the surface area.
  • Sand, so that the adhesive can bond.
  • Make sure the surface area is grease-free, dirt and dust.
  • Pick the suitable primer for your kind of surface area.

Other important planning to do before you begin:

  • Procedure your square video.
  • Find out the variety of tiles needed for the job.
  • Buy at least 10% more tiles in case of breakage during the installation. You might want to increase the quantity to 20% or even 30% additional if you’re about to set up delicate patterns. There are no warranties when it pertains to discovering the exact same batch, and even one that will carefully resemble what you bought, even more down the line, so this is extremely advised.

Make certain you have the right kind of adhesive.

According to the expert tradespersons from Fantastic Tilers, less experienced Do It Yourself enthusiasts can use the ready-mix type of adhesive, however an expert tiler will constantly use the powdered option. It dries slower and hence enables you to much better change and line up the entire wall tiling.

Handy idea: When tiling kitchen splashbacks or damp spaces, or setting up restroom tiles in general, adhesive need to be water-resistant.

Make sure the wall is level or your tile setup might not succeed.

Tiling an uneven wall has the possible to lead to disaster. A simple way to spot abnormalities is by positioning something long and flat (i.e. a regular slab) on the wall and sliding it across. By doing this, you can identify any swollen locations or bumps, need to they exist.

An irregular wall can prevent adhesive from sticking– which could cause your whole wall setup to collapse. According to professional tilers, anything in between 3 and 6mm is still convenient– but anything beyond that is most likely to cause trouble.

If you choose to apply a somewhat thicker layer of adhesive to compensate, its grip may loosen– leading to undesirable concerns further down the line.

Different surface areas need different ways of preparation.

Some surfaces, such as a fresh drywall, require a minimum of a month to effectively dry. Other cases, such as when you’re tiling on wood, require a coat of polyurethane paint. Make certain you have the right service for your specific wall and, whenever in doubt, consult with an expert tiler.

Tile board backers are a fantastic method to deal with unequal surface areas with minimal effort.

Although slightly more expensive, tile board backers can help you solve the problem– not to mention that these products are resistant to moisture, and can effectively avoid mould (which is known to grow on porous materials in warm, wet conditions). This advantage makes tile backer boards a practical solution for showers, areas and bathrooms surrounding the kitchen sink.

The one drawback of tile backer boards is that using such items will make your fresh tile installation a bit more expensive.

Helpful idea: One essential thing to make sure of here is that the boards are well-mounted and tough.

Can you install new tiles on top of old tiles?

Tiling over old tiles is possible– however it’s constantly better to get rid of and retile.

The majority of tiles are too smooth for adhesive to properly bond and, in these cases, extra treatment is required. Depending on the toolkit you have at hand, you might either try a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, act with additional caution so as not to harm the integrity of your old tiling.

Crucial: Constantly examine for empty space behind old tiles. To do this, simply knock on each piece with your hand and listen out for hollow noises. Locations with hollow area are simple to spot, but beware– if you stop working to identify these and tile over them anyway, you run the risk of having your fresh tiles collapse in the relatively future.

tiling tools

What tools will I need for a Do It Yourself tile setup?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Routine energy knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a similar tool).
  • Pencil.
  • Determining tape.
  • Drill.
  • Pins (to support the tile until the adhesive bonds and dries off).
  • Level.

Crucial: Make certain your surface is constantly dust, dirt and moisture-free or there’s a possibility your adhesive might not correctly bond.

For many kinds of masonry, ceramic and vinyl tiles will stick– but for wood surface areas, you’ll require to use a coat of paint or prime.

How do I prep drywall for a fresh tile installation?

Fresh drywall requires approximately a month before it’s ready for tiling, however when the time comes, you won’t have to tape the joints. All you’ll need to do is apply a skim coat and sand. When done, clean the surface area from dust, dry any signs of wetness and use the adhesive.

Crucial: For locations abundant with wetness, use water-resistant plasterboard.

How do I prep old drywall for a fresh tile setup?

It’s vital to appropriately examine whether the wall is steady and strong sufficient to hold the weight of fresh tiling. If you’re unsure, you should constantly ask for advice from an experienced tiler.

Fill in any cracks or holes from pins, nails or any other kind of wall fitting, use the primer, leave it to dry, sand one more time, and after that use the adhesive.

How do I prep the wall for tiles if the drywall is already painted or textured?

According to specialists, you must use PVA or make a DIY guide by including a bit more water to your adhesive.

After that, there are a couple of crucial tasks to look after:.

  • Eliminate depreciated paint.
  • Repair cracks and holes.
  • Sand if bumps exist.
  • Clean the surface.
  • Make sure there are no indications of oil or grease.

Useful idea: Treat the wall with Trisodium Phosphate (TSP). It’s an effective cleaner, stain eliminator and degreaser– however keep in mind that this should, obviously, be kept well away from children.

How do I prep a plywood surface area for fresh tiling?

When it comes to walls, the fact is that plywood is appropriate for tiling your floors but not as useful. The product is made from compressed wood combined with numerous oils, which suggests that heat can affect it. If exposed to dramatic and frequent modifications in temperature, tiles and grout will likely crack.

How do I prep a wallpapered wall for tiling?

When it comes to walls, tiles use much more longevity and usefulness than wallpaper, and the very best alternative is to remove wallpaper anywhere possible. The most problem-free and effective method is by exposing the room to steam– however this method does feature some threats. If you’re dealing with drywall or engineered wood via steam, the high temperatures and wetness can potentially cause damage which is typically beyond simple repair work.

Additionally, you can merely clean the surface area with a damp and warm rag. By doing this, moisture won’t penetrate through to the substrate itself– however at the same time, the wallpaper will chill out. Repeat the treatment a few times and use a scraper to peel whatever with very little effort.

Once done, all you’ll require to do prior to applying primer or adhesive is to ensure the surface area is dry and tidy.

You can set up new tiles on numerous surface areas, as long you prepare the wall properly. When proper preparation is done, you can quickly apply adhesive and stick your fresh tiles straight onto the wall.

Areas with hollow area are simple to spot, however beware– if you stop working to identify these and tile over them anyway, you run the risk of having your fresh tiles collapse in the reasonably near future.

The reality is that plywood is ideal for tiling your floorings however not as practical when it comes to walls. When it comes to walls, tiles offer far more durability and usefulness than wallpaper, and the best choice is to eliminate wallpaper any place possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally resolution in place in an array to lid roofs, floors, walls, edges, or other objects such as tabletops. Alternatively, tile can sometimes refer to similar units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In out of the ordinary sense, a tile is a construction tile or similar object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of passionate clay.

Tiles are often used to form wall and floor coverings, and can range from simple square tiles to profound or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but new materials are furthermore commonly used, such as glass, cork, concrete and further composite materials, and stone. Tiling stone is typically marble, onyx, granite or slate. Thinner tiles can be used upon walls than upon floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button