Welcome to Modern Tiling. Established in 2000, we’re amongst the leading tilers in Dublin. With decades of experience, we specialise in providing premium property tiling & industrial tiling services across Dublin. Consistency and quality are at the core of whatever we do, allowing us to end up being among the most reliable tiling companies in Dublin.

With decades of tiling experience, our dynamic team have actually fulfilled practically every tiling request you can possibly imagine, constructing long lasting relationships with a host of suppliers & customers and crafting a service unlike any tiling business in Dublin. From minor works to massive tasks, we place consumer complete satisfaction and effectiveness above all else, ensuring we deliver on-time, in budget plan and to a high requirement.

How to tile a wall


Create a spectacular wall with attractive, practical and long lasting wall tiles

tiler dublin
Tiling is a proficient job but we’re here to help you get the best surface to your wall tiles. Whether you’re tiling an entire restroom, a shower cubicle, a splashback in a kitchen or a little section around a fireplace, our suggestions will help you attain a fantastic result.
Before you begin, it’s important to plan your tiling. Calculating the number of tiles & adhesive you require, preparing the wall and preparing out the position of the tiles are all vital aspects. Our guide to preparing your wall tiles covers all you require to understand before tiling.
This guide will walk you through how to lay the tiles. In our example we’re tiling a whole wall with square tiles in a linear tiling style. We’ll describe how to:

  • Fix entire tiles to a wall
  • Cut tiles for corners and obstacles and use corner tile trim
  • Grout and finish wall tiles
  • Seal around the edges of tiling


Tools & Products




  • Wall tiles
  • Filler – if you have any holes in the wall that require filling. If the hole in the wall is larger than the size of your fist, we advise getting a professional to make the repair.
  • Tile adhesive – we advise ready-mixed tile adhesive to save time
  • Tile spacers
  • Sanitary sealant – we recommend anti-mould sealant for a finish that lasts
  • Grout – we encourage ready-mixed grout
  • Multi-purpose fabrics
  • Tile trim – as required.




  • Guideline
  • Measuring tape
  • Chinagraph pencil or felt-tip pen – if required, to mark tiles for cutting
  • Trowel
  • Notched trowel (also referred to as a notched spreader).
  • Tile cutter.
  • Tile file – if required.
  • Hacksaw – if needed, to cut the tile trim.
  • Grout spreader (likewise called a grout float).
  • Grout finisher (likewise called a grout shaper).
  • Claw hammer.
  • Sponge.
  • Container.
  • Level.
  • Cartridge gun – if needed. Some sealant comes as a trigger weapon and does not require a cartridge weapon. Inspect the item directions for the sealant.
  • Sealant smoother.


Safety package.


  • Security gloves.
  • Dust mask.



Security initially.


  • When cutting tiles, use security goggles and a dust mask to safeguard you from flying fragments and sharp edges.


How to tile an entire wall.

Once you have actually prepared the tiles, prepared the wall and fixed your wood battens, lay whole tiles first by following these steps.

wall tiling step 1


Step 1.

Scoop up some tile adhesive with the trowel and press it onto the wall, beginning in the corner formed by the timber battens. Spread it with the notched trowel, working away from the corner with horizontal strokes. Hold the edge of the notched trowel at an angle of about 45 °. The ridges in the adhesive will guarantee there’s an equivalent amount behind each tile, making it easier to get them all level. Attempt not to deal with more than one square metre at a time, as the adhesive might start solidifying before you’ve put all the tiles in place.
Choose an appropriate tile adhesive for your tiles: for ceramic tiles use a ready-mixed tile adhesive or powder adhesive and a powder tile adhesive for porcelain tiles.
Use adhesive to the wall and also on the back of the tiles if your tiles are bigger than 20 x 20.


Step 2.

Place your very first tile into the corner, pushing its edges versus the corners and the entire tile strongly against the wall. Then add a tile above it and one next to the original tile pressing them strongly into the adhesive utilizing a twisting action.
If you let it dry it’ll be extremely challenging to take off, clean off any adhesive from the tiles with a damp sponge as you go–.
Top pointer – using mosaic tiles.
When using mosaic tiles to the wall, hold a piece of board over the tiles while the adhesive is wet and tap the board gently with a rubber mallet. This will offer the tiles a flat, even finish.
Some mosaics are set at various heights, in which case you ought to utilize your hand to guarantee they’re all individually bedded into the adhesive.

Action 3.

When needed, put tile spacers into the corners between the tiles and change the tile positions as and. Push them in strongly and position them flush against the wall so you can grout over them.

Step 4.

Add another tile above the last one you applied, and another next to it. Continue applying the whole tiles in this way up until you’ve tiled the location covered with tile adhesive.
Apply another square metre of adhesive and tiles till you have actually repaired all the whole tiles.
At the edges of the wall, put one leg of the spacer between the tiles so the rest is sticking out– we’ll eliminate this later before grouting.

Step 5.

Leave to dry for the length of time directed on the tile adhesive directions.

Step 6.

Eliminate the vertical timber batten by prising out it’s nails with the claw of a hammer.

Step 7.

Fix whole tiles to the other section of the wall, starting from the corner beside the tiles you’ve already repaired.

Step 8.

When all the whole tiles have been repaired and are dry, eliminate the horizontal wood batten.
Now you have actually repaired all of the entire tiles, you’re ready to fill the edges and corners of the wall. Head to ‘How to tile corners’ to learn how to do this.

How to tile corners.

In this area, we’ll talk you through tiling corners. There are 2 kinds of corner– external and internal. These could be corners produced by corners or walls created by blockages:.

Internal corner.

The corner join between two walls, for example the corner of a room, or the corner created by a door frame.

External corner.

Outward-facing corner that protrudes into the room, for example the corner of a feature wall or the edge of a window recess.
There’s a different approach for tiling depending upon the type of corner, and we’ll discuss both approaches in this area.
Sometimes you might find that you can fit entire tiles throughout the wall without requiring to cut a tile for the corner. If no cuts are necessary, jump to the section ‘How to grout and finish wall tiles’.
You’ll need to cut a tile to fit into the corner.

How to determine and mark tiles for cutting.

There are two methods to mark a tile and measure for cutting:.

Choice 1.

Hold the tile you’ll be cutting over the last entire tile in the row. Fit another versus the wall and mark where it overlaps the one listed below with a tile scribe, chinagraph pencil or felt-tip pen.

Choice 2.

Take separate measurements at the top and bottom of the area you’re going to fill utilizing a measuring tape. Mark the measurements at the top and bottom of the tile. Line up the square with the two marks and draw a line between them with a pencil or felt-tip pen, providing you a vertical line to cut along.
With the marks made, it’s time to cut the tiles. Head to our How to cut tiles article for suggestions on this.

Step 1.

After you’ve cut the tile, check to see that it fits. , if you require to make any little changes use a tile file..
You do not have to be absolutely accurate as the edges will be concealed by the tiles on the other wall if you’re also going to tile the adjacent wall.

How to tile internal corners.


Step 1.

After you have actually cut the tile, check to see that it fits. If you need to make any little modifications use a tile file. You don’t have to be absolutely precise as the edges will be concealed by the tiles on the other wall if you’re also going to tile the adjacent wall.

Action 2.

Use the narrow end of a notched spreader to put adhesive on the back of the cut tile. Press it into location so it’s level with the surrounding tile. Use spacers if you require to.

Step 3.

If you’re tiling more than one wall, carry on to the next wall. If not, you’re ready to start grouting and completing the tiles. For advice on this, jump to our section ‘How to end up and grout wall tiles’.

How to tile external corners.

Usage tile trims to get a neat surface on external corners. It likewise assists to protect the edges of the tiles from knocks, which might chip them. The trim can be found in a series of products, shapes, sizes and colours. Here we’re using white 1/4 inch external edge tile trim.

Step 1.

Finish tiling your first wall.

Action 2.

Use a tape measure to determine the length of the edge that you’ll be fixing the tile trim to.

Action 3.

Procedure the tile trim to the very same size and make a mark on it to indicate where to cut. Use a hacksaw to cut the tile trim to the length you require.

Step 4.

Include a narrow strip of tile adhesive to the untiled wall utilizing the notched trowel and press the trim into it.

Step 5.

Line the trim up with the tiles of your first wall. Put 2 spacers between the trim and each tile (one near the top of the tile and one near the bottom) to ensure there’s a space for grout.

Step 6.

Put more tile adhesive on the untitled wall with the notched trowel. Add the adhesive vertically from top to bottom to prevent knocking the tile cut out of place with the teeth of the notched trowel.

Step 7.

Start tiling your second wall, working away from the corner trim. As you set the tiles in place, keep in mind to enable a narrow grouting gap between them and the trim. Place spacers and adjust the tiles as you go, so the gap remains the very same and the trim stays in place.

How to grout and finish wall tiles.

As soon as the tiles are repaired in place and the adhesive has dried, it’s time to use the grout.

Step 1.

Get rid of the protruding tile spacers at the edges of the wall and at corners.

Step 2.

Beginning in the bottom left corner, press a percentage of grout onto the face of the tiles with a trowel.
Use a grout spreader, also called a grout float, to spread it, making long, diagonal strokes and working it into the joints between tiles. Continue till you’ve grouted all the joints. The grout will soon begin to solidify, so do this as fast as you can.
Split it into areas and grout an area at a time if you’re grouting a large location. This is to avoid the grout hardening too much whilst you end up grouting the entire location.

Action 3.

Instantly after you end up applying the grout, discuss the tiles with a damp sponge (but not too wet as this might cause discolouration) to remove any excess. Make sure not to drag any grout from the joints.

Step 4.

Leave the grout to dry. As it does, you’ll see a grainy film appear on the tiles from all the sponging. Clean this off with a soft, clean fabric.

How to seal around the edge of tiling.

Sealing around the edge of tiling is necessary to stop water supporting the tiles, especially around worktops, basins and kitchen area sinks. Water behind tiles can trigger damage to the wall, fittings and fixtures. We’ll talk you through sealing the edge of tiling with sanitary sealant.

Step 1.

Attach the nozzle to the sealant and cut off the suggestion, as directed by the item guidelines. If needed, put the sealant into the cartridge gun.

Action 2.

Run a continuous bead of sealant, working from one end of the tiled location to the other, from delegated right. Try to keep a consistent pressure on the trigger of the weapon and a constant speed when you’re doing this.

Action 3.

Smooth any abnormalities in the shape of the bead with a sealant smoother (or a wet finger), however make sure not to pull the sealant from the surface area.

Step 4.


Leave the sealant to dry.

Determining the number of tiles & adhesive you need, preparing and preparing the wall out the position of the tiles are all necessary factors. Our guide to preparing your wall tiles covers all you require to know prior to tiling.

In our example we’re tiling an entire wall with square tiles in a direct tiling design. If you’re also going to tile the nearby wall, you don’t have to be totally precise as the edges will be concealed by the tiles on the other wall.
Start tiling your second wall, working away from the corner trim.

Modern Tiling Videos



Learn More About Tiling



Related Articles



Modern Tiling Services



Around the Web


Call Now Button