Established in 2000, we’re among the leading tilers in Dublin. Consistency and quality are at the core of everything we do, allowing us to become amongst the most trusted tiling companies in Dublin.

With years of tiling experience, our vibrant group have fulfilled essentially every tiling demand imaginable, building long lasting relationships with a host of providers & clients and crafting a service unlike any tiling business in Dublin. From minor works to large-scale jobs, we position customer satisfaction and efficiency above all else, guaranteeing we deliver on-time, in spending plan and to a high standard.

How to tile a wall


Create a stunning wall with appealing, resilient and useful wall tiles

tiler dublin
Tiling is a proficient task but we’re here to assist you get the very best finish to your wall tiles. Whether you’re tiling a whole restroom, a shower cubicle, a splashback in a kitchen area or a little section around a fireplace, our recommendations will help you achieve a fantastic outcome.
Prior to you start, it is essential to prepare your tiling. Calculating the number of tiles & adhesive you need, preparing and preparing the wall out the position of the tiles are all important elements. Our guide to planning your wall tiles covers all you need to know before tiling.
This guide will stroll you through how to lay the tiles. In our example we’re tiling a whole wall with square tiles in a linear tiling design. We’ll explain how to:

  • Repair entire tiles to a wall
  • Cut tiles for corners and barriers and use corner tile trim
  • Grout and surface wall tiles
  • Seal around the edges of tiling


Tools & Materials




  • Wall tiles
  • Filler – if you have any holes in the wall that require filling. We suggest getting an expert to make the repair if the hole in the wall is larger than the size of your fist.
  • Tile adhesive – we recommend ready-mixed tile adhesive to save time
  • Tile spacers
  • Sanitary sealant – we suggest anti-mould sealant for a finish that lasts
  • Grout – we recommend ready-mixed grout
  • Multi-purpose fabrics
  • Tile trim – as required.




  • Rule
  • Tape measure
  • Chinagraph pencil or felt-tip pen – if required, to mark tiles for cutting
  • Trowel
  • Notched trowel (also known as a notched spreader).
  • Tile cutter.
  • Tile file – if needed.
  • Hacksaw – if required, to cut the tile trim.
  • Grout spreader (also referred to as a grout float).
  • Grout finisher (also known as a grout shaper).
  • Claw hammer.
  • Sponge.
  • Bucket.
  • Level.
  • Cartridge weapon – if required. Some sealant comes as a trigger weapon and doesn’t require a cartridge weapon. Inspect the product directions for the sealant.
  • Sealant smoother.


Security kit.


  • Security gloves.
  • Dust mask.



Security first.


  • When cutting tiles, use safety goggles and a dust mask to protect you from flying pieces and sharp edges.


How to tile an entire wall.

As soon as you have actually prepared the tiles, prepared the wall and repaired your lumber battens, lay whole tiles initially by following these steps.

wall tiling step 1


Step 1.

Scoop up some tile adhesive with the trowel and press it onto the wall, beginning in the corner formed by the wood battens. Spread it with the notched trowel, working away from the corner with horizontal strokes. Hold the edge of the notched trowel at an angle of about 45 °. The ridges in the adhesive will ensure there’s an equivalent amount behind each tile, making it easier to get them all level. Try not to work on more than one square metre at a time, as the adhesive could start solidifying before you have actually put all the tiles in place.
Pick an appropriate tile adhesive for your tiles: for ceramic tiles use a ready-mixed tile adhesive or powder adhesive and a powder tile adhesive for porcelain tiles.
If your tiles are larger than 20 x 20, use adhesive to the wall and also on the back of the tiles.


Action 2.

Put your very first tile into the corner, pushing its edges versus the corners and the whole tile strongly against the wall. Then include a tile above it and one beside the initial tile pressing them firmly into the adhesive utilizing a twisting action.
If you let it dry it’ll be extremely hard to take off, clean off any adhesive from the tiles with a wet sponge as you go–.
Top tip – applying mosaic tiles.
When applying mosaic tiles to the wall, hold a piece of board over the tiles while the adhesive is wet and tap the board gently with a rubber mallet. This will offer the tiles a flat, even complete.
Some mosaics are set at different heights, in which case you must utilize your hand to ensure they’re all individually bedded into the adhesive.

Step 3.

When required, put tile spacers into the corners between the tiles and adjust the tile positions as and. Push them in securely and place them flush versus the wall so you can grout over them.

Step 4.

Include another tile above the last one you applied, and another beside it. Continue using the whole tiles in this way up until you’ve tiled the location covered with tile adhesive.
Apply another square metre of adhesive and tiles till you have fixed all the whole tiles.
At the edges of the wall, put one leg of the spacer between the tiles so the rest is protruding– we’ll remove this later prior to grouting.

Step 5.

Delegate dry for the length of time directed on the tile adhesive instructions.

Action 6.

Remove the vertical wood batten by prising out it’s nails with the claw of a hammer.

Action 7.

Repair entire tiles to the other area of the wall, beginning with the corner beside the tiles you have actually already repaired.

Step 8.

Once all the entire tiles have actually been repaired and are dry, get rid of the horizontal timber batten.
Now you’ve fixed all of the entire tiles, you’re ready to fill the edges and corners of the wall. Head to ‘How to tile corners’ to find out how to do this.

How to tile corners.

In this section, we’ll talk you through tiling corners. There are two types of corner– internal and external. These could be corners produced by walls or corners developed by obstructions:.

Internal corner.

The corner join in between 2 walls, for instance the corner of a space, or the corner developed by a door frame.

External corner.

Outward-facing corner that extends into the space, for example the corner of a feature wall or the edge of a window recess.
There’s a different technique for tiling depending upon the kind of corner, and we’ll discuss both techniques in this area.
In some cases you may discover that you can fit whole tiles across the wall without requiring to cut a tile for the corner. If no cuts are essential, dive to the area ‘How to grout and complete wall tiles’.
You’ll require to cut a tile to fit into the corner.

How to measure and mark tiles for cutting.

There are two methods to mark a tile and determine for cutting:.

Choice 1.

Hold the tile you’ll be cutting over the last entire tile in the row. Fit another versus the wall and mark where it overlaps the one listed below with a tile scribe, chinagraph pencil or felt-tip pen.

Alternative 2.

Take different measurements at the top and bottom of the area you’re going to fill utilizing a measuring tape. Mark the measurements at the top and bottom of the tile. Line up the square with the two marks and draw the line between them with a pencil or felt-tip pen, giving you a vertical line to cut along.
With the marks made, it’s time to cut the tiles. Head to our How to cut tiles short article for suggestions on this.

Step 1.

After you have actually cut the tile, check to see that it fits. If you require to make any little modifications utilize a tile file.
You do not have to be completely accurate as the edges will be concealed by the tiles on the other wall if you’re likewise going to tile the adjacent wall.

How to tile internal corners.


Action 1.

After you have actually cut the tile, check to see that it fits. , if you require to make any small modifications use a tile file.. You do not have to be completely accurate as the edges will be concealed by the tiles on the other wall if you’re likewise going to tile the surrounding wall.

Action 2.

Utilize the narrow end of a notched spreader to put adhesive on the back of the cut tile. Then press it into location so it’s level with the nearby tile. If you require to, Usage spacers.

Step 3.

If you’re tiling more than one wall, proceed to the next wall. If not, you’re ready to begin grouting and ending up the tiles. For advice on this, jump to our section ‘How to grout and finish wall tiles’.

How to tile external corners.

Usage tile trims to get a cool finish on external corners. It also assists to protect the edges of the tiles from knocks, which might chip them.

Step 1.

Complete tiling your first wall.

Step 2.

Use a measuring tape to measure the length of the edge that you’ll be fixing the tile trim to.

Step 3.

Measure the tile trim to the same size and make a mark on it to indicate where to cut. Use a hacksaw to cut the tile trim to the length you need.

Step 4.

Add a narrow strip of tile adhesive to the untiled wall using the notched trowel and press the trim into it.

Step 5.

Line the trim up with the tiles of your very first wall. Put two spacers between the trim and each tile (one near the top of the tile and one near the bottom) to make certain there’s a space for grout.

Step 6.

Put more tile adhesive on the untitled wall with the notched trowel. Include the adhesive vertically from top to bottom to prevent knocking the tile cut out of place with the teeth of the notched trowel.

Step 7.

Start tiling your second wall, working away from the corner trim. As you set the tiles in place, remember to allow a narrow grouting space between them and the trim. Place spacers and change the tiles as you go, so the space stays the same and the trim remain in place.

How to grout and finish wall tiles.

When the tiles are fixed in place and the adhesive has actually dried, it’s time to use the grout.

Action 1.

Get rid of the protruding tile spacers at the edges of the wall and at corners.

Step 2.

Starting in the bottom left corner, press a small amount of grout onto the face of the tiles with a trowel.
Use a grout spreader, likewise referred to as a grout float, to spread it, making long, diagonal strokes and working it into the joints between tiles. Continue until you’ve grouted all the joints. The grout will soon start to harden, so do this as fast as you can.
If you’re grouting a big area, divided it into sections and grout a section at a time. This is to avoid the grout hardening too much whilst you end up grouting the whole area.

Step 3.

Immediately after you complete applying the grout, review the tiles with a damp sponge (however not too wet as this may cause discolouration) to remove any excess. Make sure not to drag any grout from the joints.

Step 4.

Leave the grout to dry. As it does, you’ll notice a grainy movie appear on the tiles from all the sponging. Clean this off with a soft, clean cloth.

How to seal around the edge of tiling.

Sealing around the edge of tiling is important to stop water getting behind the tiles, especially around worktops, basins and kitchen area sinks. Water behind tiles can trigger damage to the wall, fixtures and fittings. We’ll talk you through sealing the edge of tiling with hygienic sealant.

Step 1.

Attach the nozzle to the sealant and cut off the tip, as directed by the item guidelines. If required, put the sealant into the cartridge weapon.

Step 2.

Run a continuous bead of sealant, working from one end of the tiled area to the other, from delegated right. When you’re doing this, try to keep a consistent pressure on the trigger of the gun and a consistent speed.

Action 3.

Smooth any abnormalities in the shape of the bead with a sealant smoother (or a damp finger), however make sure not to pull the sealant from the surface area.

Step 4.


Leave the sealant to dry.

Calculating the number of tiles & adhesive you require, preparing and preparing the wall out the position of the tiles are all necessary factors. Our guide to preparing your wall tiles covers all you require to understand before tiling.

In our example we’re tiling a whole wall with square tiles in a linear tiling style. If you’re likewise going to tile the surrounding wall, you don’t have to be absolutely accurate as the edges will be hidden by the tiles on the other wall.
Start tiling your 2nd wall, working away from the corner trim.

Modern Tiling Videos



Learn More About Tiling



Related Articles



Modern Tiling Services



Around the Web


Call Now Button