There are a number of tiling companies in Dublin, however it’s constantly the most crucial to trust and choose. Your single click when browsing for “regional tilers near me” online or calling someone over the phone can assist you find a tiler in Dublin. Selecting the right tiling system in Dublin can be a difficult job.

We are a certified and certified tiling firm in Dublin. Having several years of experience and knowledgeable commercial tilers in Dublin, we can mesmerize the appearance of your place with our lovely ceramic tiles.

How to Prepare a Wall for Tiling (Top + detailed Tips).


Preparing your walls for a fresh wall tile installation is hassle-free and simple with our no-nonsense guide ready.

You can set up new tiles on different surfaces, as long you prepare the wall properly. Simply ensure the surface area is level enough, and dust and dirt-free– and that there are no indications of recurring wetness. When correct preparation is done, you can easily use adhesive and stick your fresh tiles straight onto the wall.

How to prepare for tiling a wall:.

  • Eliminate old fittings, such as pins, screws, rivets etc
  • Repair work or get rid of unsuited plaster.
  • If present), get rid of or pre-treat wallpaper (.
  • Repair any cracks or signs of damage.
  • Level the surface area.
  • Sand, so that the adhesive can bond.
  • Make certain the surface is grease-free, dust and dirt.
  • Select the suitable primer for your type of surface.

Other crucial planning to do before you get started:

  • Procedure your square video.
  • Figure out the variety of tiles needed for the task.
  • Purchase least 10% more tiles in case of damage throughout the installation. If you will set up fragile patterns, you might want to increase the total up to 20% and even 30% extra. There are no assurances when it concerns discovering the very same batch, or even one that will closely resemble what you purchased, further down the line, so this is highly suggested.

Make certain you have the right type of adhesive.

According to the expert tradesmen from Great Tilers, less skilled DIY enthusiasts can use the ready-mix type of adhesive, but an expert tiler will always use the powdered solution. It dries slower and thus permits you to better adjust and line up the entire wall tiling.

Practical pointer: When tiling kitchen splashbacks or damp rooms, or installing restroom tiles in general, adhesive must be waterproof.

Make sure the wall is level or your tile installation may not succeed.

Tiling an irregular wall has the prospective to result in disaster. An easy way to find abnormalities is by positioning something long and flat (i.e. a regular slab) on the wall and sliding it throughout. By doing this, you can determine any inflamed locations or bumps, should they exist.

An unequal wall can prevent adhesive from sticking– which might cause your entire wall installation to collapse. According to expert tilers, anything in between 3 and 6mm is still convenient– but anything beyond that is likely to cause trouble.

Its grip may loosen– leading to unwanted issues further down the line if you choose to apply a somewhat thicker layer of adhesive to compensate.

Different surfaces require various means of preparation.

Some surfaces, such as a fresh drywall, require at least a month to correctly dry. Other cases, such as when you’re tiling on wood, need a coat of polyurethane paint. Ensure you have the best service for your particular wall and, whenever in doubt, consult with an expert tiler.

Tile board backers are a terrific method to deal with irregular surfaces with very little effort.

Although slightly pricier, tile board backers can assist you fix the problem– not to mention that these products are resistant to wetness, and can successfully avoid mould (which is known to grow on permeable materials in warm, wet conditions). This benefit makes tile backer boards an useful solution for bathrooms, areas and showers surrounding the cooking area sink.

The one drawback of tile backer boards is that using such products will make your fresh tile setup a little bit more expensive.

Helpful pointer: One essential thing to ensure of here is that the boards are sturdy and well-mounted.

Can you set up new tiles on top of old tiles?

Tiling over old tiles is possible– however it’s constantly much better to get rid of and retile.

A lot of tiles are too smooth for adhesive to appropriately bond and, in these cases, additional treatment is required. Depending on the toolkit you have at hand, you could either try a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, show extra caution so as not to harm the integrity of your old tiling.

Crucial: Constantly check for void behind old tiles. To do this, just knock on each piece with your hand and listen out for hollow sounds. Areas with hollow space are easy to identify, however beware– if you stop working to spot these and tile over them anyhow, you run the risk of having your fresh tiles collapse in the reasonably future.

tiling tools

What tools will I need for a DIY tile installation?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Regular energy knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a similar tool).
  • Pencil.
  • Measuring tape.
  • Drill.
  • Pins (to support the tile till the adhesive bonds and dries off).
  • Level.

Essential: Make sure your surface area is constantly dust, dirt and moisture-free or there’s an opportunity your adhesive may not effectively bond.

For the majority of types of masonry, ceramic and vinyl tiles will stick– but for wood surfaces, you’ll require to use a coat of paint or prime.

How do I prep drywall for a fresh tile installation?

Fresh drywall requires up to a month prior to it’s ready for tiling, however when the time comes, you won’t have to tape the joints. All you’ll require to do is apply a skim coat and sand. Once done, clean the surface area from dust, dry any signs of moisture and use the adhesive.

Crucial: For locations abundant with moisture, usage water-resistant plasterboard.

How do I prep old drywall for a fresh tile installation?

It’s essential to correctly assess whether the wall is steady and strong enough to hold the weight of fresh tiling. You ought to always ask for guidance from a knowledgeable tiler if you’re not sure.

Fill out any cracks or holes from pins, nails or any other type of wall fitting, apply the primer, leave it to dry, sand one more time, and then use the adhesive.

How do I prep the wall for tiles if the drywall is already painted or textured?

According to experts, you ought to apply PVA or make a DIY guide by including a bit more water to your adhesive.

After that, there are a couple of essential jobs to look after:.

  • Remove depreciated paint.
  • Repair cracks and holes.
  • If bumps are present, sand.
  • Wipe the surface.
  • Ensure there are no indications of oil or grease.

Practical pointer: Deal with the wall with Trisodium Phosphate (TSP). It’s a powerful cleaning agent, stain cleaner and degreaser– however bear in mind that this should, obviously, be kept well away from children.

How do I prep a plywood surface area for fresh tiling?

The reality is that plywood appropriates for tiling your floors but not as useful when it concerns walls. The product is made from compressed wood mixed with numerous oils, which indicates that heat can affect it. If exposed to regular and significant changes in temperature level, tiles and grout will likely split.

How do I prep a wallpapered wall for tiling?

When it pertains to walls, tiles offer even more durability and practicality than wallpaper, and the best alternative is to get rid of wallpaper any place possible. The most hassle-free and efficient method is by exposing the space to steam– but this method does include some risks. The high temperatures and moisture can potentially cause damage which is frequently beyond easy repair work if you’re treating drywall or engineered wood by means of steam.

You can simply clean the surface area with a damp and warm rag. By doing this, wetness will not permeate through to the substrate itself– however at the same time, the wallpaper will relax. Repeat the treatment a couple of times and utilize a scraper to peel whatever with minimal effort.

As soon as done, all you’ll require to do prior to using guide or adhesive is to make certain the surface area is tidy and dry.

You can set up brand-new tiles on various surfaces, as long you prepare the wall properly. When proper preparation is done, you can easily use adhesive and stick your fresh tiles straight onto the wall.

Areas with hollow space are easy to find, however beware– if you stop working to spot these and tile over them anyway, you run the threat of having your fresh tiles collapse in the relatively near future.

The fact is that plywood is ideal for tiling your floorings but not as useful when it comes to walls. When it comes to walls, tiles provide far more durability and usefulness than wallpaper, and the finest alternative is to remove wallpaper any place possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally unmovable in place in an array to cover roofs, floors, walls, edges, or new objects such as tabletops. Alternatively, tile can sometimes adopt to same units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In unconventional sense, a tile is a construction tile or similar object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of afire clay.

Tiles are often used to form wall and floor coverings, and can range from easy square tiles to technical or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but additional materials are moreover commonly used, such as glass, cork, concrete and additional composite materials, and stone. Tiling rock is typically marble, onyx, granite or slate. Thinner tiles can be used on walls than upon floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button