WHY SELECT Modern Tiling

There are a number of tiling companies in Dublin, however it’s constantly the most important to trust and pick. Your single click when searching for “local tilers near me” online or calling someone over the phone can help you find a tiler in Dublin. Choosing the right tiling system in Dublin can be a difficult task.

We are a licensed and qualified tiling firm in Dublin. Having a number of years of experience and proficient business tilers in Dublin, we can mesmerize the appearance of your location with our gorgeous ceramic tiles.

How to Prepare a Wall for Tiling (Top + step-by-step Tips).

tilers

Preparing your walls for a fresh wall tile setup is basic and problem-free with our no-nonsense guide ready.

You can set up new tiles on different surfaces, as long you prepare the wall appropriately. Simply make certain the surface area is level enough, and dust and dirt-free– which there are no indications of residual moisture. When correct preparation is done, you can easily use adhesive and stick your fresh tiles straight onto the wall.

How to get ready for tiling a wall:.

  • Get rid of old fittings, such as pins, screws, rivets etc
  • Repair or eliminate unsuited plaster.
  • If present), get rid of or pre-treat wallpaper (.
  • Fix any cracks or signs of damage.
  • Level the surface.
  • Sand, so that the adhesive can bond.
  • Make certain the surface is dust, grease-free and dirt.
  • Select the appropriate guide for your type of surface.

Other important planning to do before you begin:

  • Step your square video footage.
  • Figure out the number of tiles required for the job.
  • Purchase least 10% more tiles in case of damage during the setup. You might wish to increase the amount to 20% or even 30% extra if you’re about to install delicate patterns. There are no warranties when it pertains to discovering the same batch, or perhaps one that will closely resemble what you bought, even more down the line, so this is highly recommended.

Ensure you have the best kind of adhesive.

According to the professional tradesmen from Wonderful Tilers, less knowledgeable DIY lovers can use the ready-mix kind of adhesive, but a professional tiler will always apply the powdered service. It dries slower and therefore permits you to much better adjust and line up the entire wall tiling.

Handy pointer: When tiling kitchen splashbacks or damp spaces, or setting up bathroom tiles in general, adhesive must be water-resistant.

Ensure the wall is level or your tile installation may not achieve success.

Tiling an uneven wall has the prospective to lead to catastrophe. An easy method to spot irregularities is by positioning something long and flat (i.e. a routine slab) on the wall and sliding it across. By doing this, you can identify any swollen locations or bumps, should they exist.

An irregular wall can prevent adhesive from sticking– which might cause your entire wall installation to collapse. According to professional tilers, anything in between 3 and 6mm is still practical– but anything beyond that is likely to cause trouble.

Its grip may loosen up– leading to undesirable issues even more down the line if you choose to apply a slightly thicker layer of adhesive to compensate.

Different surfaces require various ways of preparation.

Some surfaces, such as a fresh drywall, require a minimum of a month to effectively dry. Other cases, such as when you’re tiling on wood, need a coat of polyurethane paint. Make sure you have the ideal option for your particular wall and, whenever in doubt, seek advice from an expert tiler.

Tile board backers are a terrific method to handle uneven surface areas with minimal effort.

Although a little costlier, tile board backers can help you solve the problem– not to mention that these products are resistant to wetness, and can effectively prevent mould (which is known to grow on porous materials in warm, damp conditions). This benefit makes tile backer boards a practical option for locations, showers and bathrooms surrounding the cooking area sink.

The one disadvantage of tile backer boards is that using such products will make your fresh tile installation a little more expensive.

Helpful suggestion: One vital thing to ensure of here is that the boards are sturdy and well-mounted.

Can you set up brand-new tiles on top of old tiles?

Tiling over old tiles is possible– however it’s always much better to retile and get rid of.

A lot of tiles are too smooth for adhesive to effectively bond and, in these cases, extra treatment is required. Depending upon the toolkit you have at hand, you might either try a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, act with additional caution so as not to damage the stability of your old tiling.

Essential: Always examine for void behind old tiles. To do this, merely knock on each piece with your hand and listen out for hollow sounds. Areas with hollow space are easy to spot, however beware– if you fail to spot these and tile over them anyhow, you risk of having your fresh tiles collapse in the reasonably near future.

tiling tools

What tools will I need for a DIY tile setup?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Routine energy knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a comparable tool).
  • Pencil.
  • Measuring tape.
  • Drill.
  • Pins (to support the tile up until the adhesive bonds and dries off).
  • Level.

Important: Make certain your surface area is constantly dust, dirt and moisture-free or there’s a possibility your adhesive may not correctly bond.

For a lot of types of masonry, ceramic and vinyl tiles will stick– but for wood surfaces, you’ll need to apply a coat of paint or prime.

How do I prep drywall for a fresh tile setup?

Fresh drywall requires as much as a month prior to it’s ready for tiling, however when the time comes, you will not have to tape the joints. All you’ll need to do is use a skim coat and sand. When done, tidy the surface area from dust, dry any indications of wetness and apply the adhesive.

Important: For locations rich with moisture, usage water-resistant plasterboard.

How do I prep old drywall for a fresh tile installation?

It’s crucial to effectively evaluate whether the wall is stable and strong sufficient to hold the weight of fresh tiling. You ought to always ask for suggestions from a skilled tiler if you’re unsure.

Fill out any fractures or holes from pins, nails or any other kind of wall fitting, use the primer, leave it to dry, sand one more time, and then apply the adhesive.

How do I prep the wall for tiles if the drywall is currently painted or textured?

According to specialists, you should apply PVA or make a DIY primer by adding a bit more water to your adhesive.

After that, there are a couple of important tasks to take care of:.

  • Remove diminished paint.
  • Repair cracks and holes.
  • If bumps are present, sand.
  • Clean the surface area.
  • Ensure there are no signs of oil or grease.

Handy idea: Treat the wall with Trisodium Phosphate (TSP). It’s a powerful cleaner, stain cleaner and degreaser– but keep in mind that this should, naturally, be kept well away from children.

How do I prep a plywood surface for fresh tiling?

When it comes to walls, the reality is that plywood is ideal for tiling your floorings but not as useful. The product is made of compressed wood blended with different oils, which means that heat can affect it. , if exposed to frequent and dramatic significant in significant, tiles and modifications will likely crack.

How do I prep a wallpapered wall for tiling?

When it pertains to walls, tiles provide even more durability and functionality than wallpaper, and the very best alternative is to remove wallpaper wherever possible. The most effective and hassle-free way is by exposing the space to steam– but this method does include some risks. The high temperature levels and wetness can possibly trigger damage which is frequently beyond easy repair if you’re treating drywall or engineered wood by means of steam.

Additionally, you can merely wipe the surface with a warm and wet rag. In this manner, wetness will not penetrate through to the substrate itself– but at the same time, the wallpaper will loosen up. Repeat the treatment a couple of times and utilize a scraper to peel everything with minimal effort.

As soon as done, all you’ll require to do prior to applying guide or adhesive is to ensure the surface area is tidy and dry.

You can install new tiles on various surface areas, as long you prepare the wall properly. When correct preparation is done, you can easily apply adhesive and stick your fresh tiles straight onto the wall.

Areas with hollow space are easy to spot, however beware– if you fail to identify these and tile over them anyhow, you run the threat of having your fresh tiles collapse in the fairly near future.

The fact is that plywood is appropriate for tiling your floorings however not as practical when it comes to walls. When it comes to walls, tiles offer far more durability and practicality than wallpaper, and the best alternative is to remove wallpaper wherever possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally unconditional in place in an array to lid roofs, floors, walls, edges, or further objects such as tabletops. Alternatively, tile can sometimes focus on to similar units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In complementary sense, a tile is a construction tile or same object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of afire clay.

Tiles are often used to form wall and floor coverings, and can range from easy square tiles to profound or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but further materials are next commonly used, such as glass, cork, concrete and further composite materials, and stone. Tiling rock is typically marble, onyx, granite or slate. Thinner tiles can be used on walls than on floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button