WHY SELECT Modern Tiling

There are several tiling business in Dublin, but it’s constantly the most important to trust and choose. Your single click when searching for “regional tilers near me” online or calling someone over the phone can assist you find a tiler in Dublin. Picking the right tiling system in Dublin can be a difficult task.

We are a licensed and competent tiling firm in Dublin. Having a number of years of experience and competent business tilers in Dublin, we can mesmerize the appearance of your location with our beautiful ceramic tiles.

How to Prepare a Wall for Tiling (Leading + step-by-step Tips).


Preparing your walls for a fresh wall tile installation is easy and problem-free with our no-nonsense guide ready.

You can install new tiles on numerous surfaces, as long you prepare the wall appropriately. Simply make sure the surface is level enough, and dust and dirt-free– and that there are no indications of residual wetness. When correct preparation is done, you can easily apply adhesive and stick your fresh tiles straight onto the wall.

How to get ready for tiling a wall:.

  • Get rid of old fittings, such as pins, screws, rivets and so on
  • Repair work or get rid of unfit plaster.
  • If present), get rid of or pre-treat wallpaper (.
  • Repair any fractures or indications of damage.
  • Level the surface area.
  • Sand, so that the adhesive can bond.
  • Ensure the surface area is grease-free, dust and dirt.
  • Choose the proper primer for your kind of surface area.

Other crucial preparation to do before you begin:

  • Step your square video.
  • Determine the variety of tiles required for the job.
  • Purchase least 10% more tiles in case of breakage throughout the installation. You may wish to increase the quantity to 20% or even 30% additional if you’re about to set up fragile patterns. There are no warranties when it pertains to finding the very same batch, or even one that will carefully resemble what you purchased, further down the line, so this is highly suggested.

Make sure you have the ideal kind of adhesive.

According to the professional tradesmen from Wonderful Tilers, less experienced Do It Yourself lovers can utilize the ready-mix type of adhesive, however a professional tiler will constantly apply the powdered option. It dries slower and thus enables you to much better adjust and align the whole wall tiling.

Useful pointer: When tiling kitchen area splashbacks or damp rooms, or setting up bathroom tiles in general, adhesive must be waterproof.

Make sure the wall is level or your tile setup might not achieve success.

Tiling an uneven wall has the possible to lead to catastrophe. A simple way to identify irregularities is by positioning something long and flat (i.e. a routine slab) on the wall and moving it across. This way, you can identify any inflamed locations or bumps, ought to they exist.

An unequal wall can avoid adhesive from sticking– which could trigger your entire wall setup to collapse. According to professional tilers, anything in between 3 and 6mm is still practical– but anything beyond that is most likely to cause trouble.

If you choose to use a somewhat thicker layer of adhesive to compensate, its grip might loosen– leading to unwanted concerns even more down the line.

Various surfaces require different ways of preparation.

Some surfaces, such as a fresh drywall, require at least a month to effectively dry. Other cases, such as when you’re tiling on wood, need a coat of polyurethane paint. Ensure you have the best option for your particular wall and, whenever in doubt, seek advice from a professional tiler.

Tile board backers are a great method to handle unequal surface areas with minimal effort.

Somewhat costlier, tile board backers can assist you resolve the issue– not to mention that these products are resistant to moisture, and can successfully avoid mould (which is understood to grow on porous materials in warm, wet conditions). This benefit makes tile backer boards a practical solution for bathrooms, showers and areas surrounding the cooking area sink.

The one drawback of tile backer boards is that utilising such products will make your fresh tile setup a little more pricey.

Helpful pointer: One crucial thing to make sure of here is that the boards are well-mounted and tough.

Can you install brand-new tiles on top of old tiles?

Tiling over old tiles is possible– but it’s always much better to retile and get rid of.

The majority of tiles are too smooth for adhesive to properly bond and, in these cases, extra treatment is needed. Depending on the toolkit you have at hand, you might either try a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, show extra caution so as not to damage the integrity of your old tiling.

Important: Always inspect for empty space behind old tiles. To do this, just knock on each piece with your hand and listen out for hollow sounds. Areas with hollow area are simple to spot, but beware– if you stop working to identify these and tile over them anyhow, you risk of having your fresh tiles collapse in the fairly near future.

tiling tools

What tools will I require for a Do It Yourself tile installation?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Routine utility knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a comparable tool).
  • Pencil.
  • Measuring tape.
  • Drill.
  • Pins (to support the tile till the adhesive bonds and dries off).
  • Level.

Important: Ensure your surface is constantly dust, dirt and moisture-free or there’s an opportunity your adhesive may not correctly bond.

For many kinds of masonry, ceramic and vinyl tiles will stick– but for wood surface areas, you’ll need to use a coat of paint or prime.

How do I prep drywall for a fresh tile setup?

Fresh drywall needs approximately a month before it’s ready for tiling, however when the time comes, you won’t have to tape the joints. All you’ll require to do is apply a skim coat and sand. Once done, clean the surface from dust, dry any indications of wetness and apply the adhesive.

Important: For areas rich with moisture, usage water-resistant plasterboard.

How do I prep old drywall for a fresh tile setup?

It’s important to correctly assess whether the wall is strong and stable adequate to hold the weight of fresh tiling. If you’re not sure, you ought to always ask for suggestions from an experienced tiler.

Fill out any fractures or holes from pins, nails or any other type of wall fitting, apply the guide, leave it to dry, sand one more time, and then apply the adhesive.

How do I prep the wall for tiles if the drywall is already painted or textured?

According to experts, you should use PVA or make a Do It Yourself primer by including a bit more water to your adhesive.

After that, there are a few essential tasks to look after:.

  • Get rid of depreciated paint.
  • Repair cracks and holes.
  • Sand if bumps are present.
  • Clean the surface.
  • Make certain there are no signs of oil or grease.

Useful tip: Deal with the wall with Trisodium Phosphate (TSP). It’s an effective cleaner, stain remover and degreaser– however bear in mind that this should, naturally, be kept well away from kids.

How do I prep a plywood surface for fresh tiling?

When it comes to walls, the truth is that plywood is ideal for tiling your floors but not as practical. The product is made of compressed wood combined with numerous oils, which means that heat can impact it. , if exposed to frequent and dramatic significant in significant, tiles and grout will likely crack.

How do I prep a wallpapered wall for tiling?

When it comes to walls, tiles use even more durability and usefulness than wallpaper, and the best alternative is to remove wallpaper wherever possible. The most efficient and hassle-free way is by exposing the room to steam– however this technique does come with some threats. If you’re dealing with drywall or engineered wood by means of steam, the heats and wetness can potentially cause damage which is often beyond simple repair.

Additionally, you can merely clean the surface with a wet and warm rag. In this manner, wetness will not permeate through to the substrate itself– but at the same time, the wallpaper will loosen up. Repeat the procedure a few times and utilize a scraper to peel whatever with minimal effort.

Once done, all you’ll need to do prior to applying guide or adhesive is to ensure the surface is dry and tidy.

You can install brand-new tiles on various surface areas, as long you prepare the wall appropriately. When proper preparation is done, you can easily apply adhesive and stick your fresh tiles straight onto the wall.

Locations with hollow area are easy to find, however beware– if you fail to spot these and tile over them anyhow, you run the danger of having your fresh tiles collapse in the relatively near future.

The reality is that plywood is appropriate for tiling your floorings however not as practical when it comes to walls. When it comes to walls, tiles use far more longevity and usefulness than wallpaper, and the finest option is to remove wallpaper wherever possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally complete in place in an array to lid roofs, floors, walls, edges, or further objects such as tabletops. Alternatively, tile can sometimes forward to same units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In complementary sense, a tile is a construction tile or similar object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of ablaze clay.

Tiles are often used to form wall and floor coverings, and can range from simple square tiles to profound or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but new materials are then commonly used, such as glass, cork, concrete and additional composite materials, and stone. Tiling stone is typically marble, onyx, granite or slate. Thinner tiles can be used on walls than on floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button