WHY SELECT Modern Tiling

There are several tiling companies in Dublin, but it’s always the most crucial to trust and select. Your single click when browsing for “local tilers near me” online or calling someone over the phone can help you find a tiler in Dublin. Selecting the ideal tiling system in Dublin can be a complicated task.

We are a licensed and competent tiling company in Dublin. Having several years of experience and experienced industrial tilers in Dublin, we can mesmerize the appearance of your location with our stunning ceramic tiles.

How to Prepare a Wall for Tiling (Top + detailed Tips).

tilers

Preparing your walls for a fresh wall tile installation is hassle-free and simple with our no-nonsense guide ready.

You can install brand-new tiles on numerous surfaces, as long you prepare the wall properly. Simply make certain the surface is level enough, and dust and dirt-free– which there are no signs of recurring moisture. When proper preparation is done, you can easily apply adhesive and stick your fresh tiles straight onto the wall.

How to prepare for tiling a wall:.

  • Eliminate old fittings, such as pins, screws, rivets and so on
  • Repair or eliminate unfit plaster.
  • Eliminate or pre-treat wallpaper (if present).
  • Fix any fractures or indications of damage.
  • Level the surface area.
  • Sand, so that the adhesive can bond.
  • Make certain the surface is dust, dirt and grease-free.
  • Pick the appropriate primer for your type of surface area.

Other important planning to do prior to you begin:

  • Step your square video footage.
  • Figure out the variety of tiles needed for the task.
  • Buy at least 10% more tiles in case of damage throughout the setup. You might wish to increase the quantity to 20% or even 30% extra if you’re about to set up delicate patterns. There are no assurances when it concerns discovering the same batch, or even one that will carefully resemble what you purchased, even more down the line, so this is highly suggested.

Make sure you have the best kind of adhesive.

According to the expert tradespersons from Wonderful Tilers, less knowledgeable Do It Yourself enthusiasts can use the ready-mix kind of adhesive, however a professional tiler will always apply the powdered option. It dries slower and hence enables you to better adjust and align the entire wall tiling.

Useful idea: When tiling kitchen area splashbacks or damp rooms, or installing restroom tiles in general, adhesive must be waterproof.

Make sure the wall is level or your tile installation might not achieve success.

Tiling an uneven wall has the potential to lead to disaster. An easy way to spot abnormalities is by positioning something long and flat (i.e. a regular plank) on the wall and sliding it throughout. This way, you can recognize any swollen areas or bumps, ought to they exist.

An uneven wall can avoid adhesive from sticking– which could trigger your whole wall installation to collapse. According to expert tilers, anything between 3 and 6mm is still workable– however anything beyond that is likely to cause trouble.

If you choose to apply a slightly thicker layer of adhesive to compensate, its grip might loosen– causing undesirable issues further down the line.

Different surfaces need different ways of preparation.

Some surface areas, such as a fresh drywall, need at least a month to appropriately dry. Other cases, such as when you’re tiling on wood, require a coat of polyurethane paint. Make sure you have the best option for your particular wall and, whenever in doubt, seek advice from a professional tiler.

Tile board backers are a great method to deal with uneven surfaces with minimal effort.

Somewhat pricier, tile board backers can assist you solve the issue– not to mention that these items are resistant to wetness, and can effectively prevent mould (which is known to grow on porous materials in warm, damp conditions). This benefit makes tile backer boards a practical solution for areas, restrooms and showers surrounding the kitchen sink.

The one downside of tile backer boards is that making use of such items will make your fresh tile installation a little bit more costly.

Useful tip: One crucial thing to make certain of here is that the boards are strong and well-mounted.

Can you set up brand-new tiles on top of old tiles?

Tiling over old tiles is possible– however it’s constantly much better to remove and retile.

The majority of tiles are too smooth for adhesive to appropriately bond and, in these cases, additional treatment is needed. Depending on the toolkit you have at hand, you might either attempt a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, show extra care so as not to damage the stability of your old tiling.

Crucial: Always examine for void behind old tiles. To do this, just knock on each piece with your hand and listen out for hollow noises. Locations with hollow area are easy to find, but beware– if you stop working to identify these and tile over them anyway, you risk of having your fresh tiles collapse in the fairly near future.

tiling tools

What tools will I require for a DIY tile installation?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Regular utility knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a comparable tool).
  • Pencil.
  • Determining tape.
  • Drill.
  • Pins (to support the tile up until the adhesive bonds and dries off).
  • Level.

Essential: Ensure your surface area is constantly dust, dirt and moisture-free or there’s a possibility your adhesive may not effectively bond.

For many types of masonry, ceramic and vinyl tiles will stick– but for wood surface areas, you’ll need to apply a coat of paint or prime.

How do I prep drywall for a fresh tile setup?

Fresh drywall requires as much as a month before it’s ready for tiling, but when the time comes, you will not need to tape the joints. All you’ll need to do is apply a skim coat and sand. When done, tidy the surface from dust, dry any indications of moisture and apply the adhesive.

Important: For locations rich with wetness, usage water-resistant plasterboard.

How do I prep old drywall for a fresh tile installation?

It’s vital to appropriately examine whether the wall is stable and strong adequate to hold the weight of fresh tiling. If you’re not sure, you should always request for advice from an experienced tiler.

Fill out any fractures or holes from pins, nails or any other type of wall fitting, use the guide, leave it to dry, sand one more time, and then apply the adhesive.

How do I prep the wall for tiles if the drywall is currently painted or textured?

According to specialists, you must apply PVA or make a DIY primer by adding a bit more water to your adhesive.

After that, there are a few crucial tasks to take care of:.

  • Eliminate depreciated paint.
  • Repair fractures and holes.
  • If bumps are present, sand.
  • Clean the surface.
  • Make sure there are no signs of oil or grease.

Handy pointer: Deal with the wall with Trisodium Phosphate (TSP). It’s a powerful cleaning agent, stain eliminator and degreaser– but remember that this should, of course, be kept well away from kids.

How do I prep a plywood surface for fresh tiling?

The fact is that plywood is suitable for tiling your floors but not as practical when it comes to walls. The product is made of compressed wood mixed with various oils, which indicates that heat can impact it. If exposed to significant and frequent changes in temperature level, tiles and grout will likely split.

How do I prep a wallpapered wall for tiling?

When it comes to walls, tiles provide far more durability and functionality than wallpaper, and the best option is to eliminate wallpaper wherever possible. The most hassle-free and efficient method is by exposing the room to steam– but this method does feature some risks. The high temperatures and wetness can potentially cause damage which is typically beyond basic repair work if you’re dealing with drywall or engineered wood by means of steam.

You can simply clean the surface with a warm and wet rag. In this manner, moisture will not permeate through to the substrate itself– however at the same time, the wallpaper will loosen up. Repeat the treatment a few times and use a scraper to peel everything with minimal effort.

When done, all you’ll need to do prior to applying guide or adhesive is to make sure the surface area is dry and tidy.

You can install new tiles on various surface areas, as long you prepare the wall properly. When proper preparation is done, you can quickly apply adhesive and stick your fresh tiles straight onto the wall.

Locations with hollow space are easy to find, but beware– if you stop working to find these and tile over them anyway, you run the danger of having your fresh tiles collapse in the relatively near future.

The fact is that plywood is ideal for tiling your floors however not as practical when it comes to walls. When it comes to walls, tiles offer far more longevity and functionality than wallpaper, and the finest option is to eliminate wallpaper anywhere possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally unqualified in place in an array to lid roofs, floors, walls, edges, or additional objects such as tabletops. Alternatively, tile can sometimes focus on to same units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In different sense, a tile is a construction tile or same object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of enthusiastic clay.

Tiles are often used to form wall and floor coverings, and can range from simple square tiles to mysterious or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but new materials are as a consequence commonly used, such as glass, cork, concrete and new composite materials, and stone. Tiling rock is typically marble, onyx, granite or slate. Thinner tiles can be used on walls than on floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button