WHY SELECT Modern Tiling

There are several tiling business in Dublin, but it’s always the most crucial to trust and pick. Your single click when looking for “local tilers near me” online or calling somebody over the phone can help you discover a tiler in Dublin. Selecting the ideal tiling system in Dublin can be a difficult task. The issue is who to get in touch with the Dublin tiling facilities. Don’t think all of you blindly. Modern Tiling may be the best choice for your tiling needs.

We are a licensed and certified tiling firm in Dublin. Having numerous years of experience and experienced business tilers in Dublin, we can enthrall the look of your location with our gorgeous ceramic tiles.

How to Prepare a Wall for Tiling (Leading + detailed Tips).


Preparing your walls for a fresh wall tile setup is hassle-free and basic with our no-nonsense guide at the ready.

You can install new tiles on various surface areas, as long you prepare the wall properly. Simply ensure the surface is level enough, and dust and dirt-free– and that there are no indications of recurring moisture. When correct preparation is done, you can easily apply adhesive and stick your fresh tiles straight onto the wall.

How to prepare for tiling a wall:.

  • Eliminate old fittings, such as pins, screws, rivets etc
  • Repair or eliminate unsuited plaster.
  • Get rid of or pre-treat wallpaper (if present).
  • Fix any cracks or signs of damage.
  • Level the surface.
  • Sand, so that the adhesive can bond.
  • Make sure the surface area is dirt, grease-free and dust.
  • Choose the suitable primer for your type of surface.

Other important preparation to do before you get started:

  • Procedure your square video footage.
  • Find out the variety of tiles needed for the task.
  • Purchase least 10% more tiles in case of breakage throughout the setup. You may wish to increase the amount to 20% or even 30% additional if you’re about to set up delicate patterns. There are no warranties when it pertains to discovering the exact same batch, and even one that will closely resemble what you purchased, further down the line, so this is extremely recommended.

Ensure you have the ideal type of adhesive.

According to the professional tradesmen from Fantastic Tilers, less knowledgeable DIY enthusiasts can use the ready-mix kind of adhesive, however a professional tiler will constantly use the powdered option. It dries slower and hence permits you to better adjust and line up the whole wall tiling.

Helpful idea: When tiling cooking area splashbacks or damp rooms, or installing bathroom tiles in general, adhesive need to be waterproof.

Make certain the wall is level or your tile setup may not succeed.

Tiling an uneven wall has the potential to result in disaster. A simple way to identify irregularities is by placing something long and flat (i.e. a regular slab) on the wall and moving it across. This way, you can identify any swollen areas or bumps, must they exist.

An irregular wall can avoid adhesive from sticking– which could cause your whole wall installation to collapse. According to professional tilers, anything between 3 and 6mm is still convenient– however anything beyond that is most likely to cause trouble.

Its grip might loosen up– leading to undesirable concerns even more down the line if you choose to apply a somewhat thicker layer of adhesive to compensate.

Different surfaces require various means of preparation.

Some surfaces, such as a fresh drywall, need a minimum of a month to properly dry. Other cases, such as when you’re tiling on wood, require a coat of polyurethane paint. Ensure you have the best solution for your specific wall and, whenever in doubt, seek advice from an expert tiler.

Tile board backers are a great way to deal with unequal surfaces with minimal effort.

Although slightly costlier, tile board backers can help you resolve the problem– not to mention that these products are resistant to wetness, and can effectively prevent mould (which is understood to grow on porous materials in warm, wet conditions). This advantage makes tile backer boards a practical service for locations, showers and bathrooms surrounding the cooking area sink.

The one downside of tile backer boards is that using such items will make your fresh tile setup a little bit more costly.

Valuable pointer: One crucial thing to make sure of here is that the boards are well-mounted and durable.

Can you set up brand-new tiles on top of old tiles?

Tiling over old tiles is possible– however it’s constantly better to remove and retile.

The majority of tiles are too smooth for adhesive to properly bond and, in these cases, additional treatment is needed. Depending upon the toolkit you have at hand, you might either attempt a sander (with medium to coarse sandpaper) or a grinding disc. You should, however, show extra care so as not to harm the integrity of your old tiling.

Crucial: Always check for empty space behind old tiles. To do this, merely knock on each piece with your hand and listen out for hollow noises. Locations with hollow area are simple to identify, however beware– if you stop working to spot these and tile over them anyhow, you risk of having your fresh tiles collapse in the fairly near future.

tiling tools

What tools will I require for a DIY tile installation?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Routine energy knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a comparable tool).
  • Pencil.
  • Determining tape.
  • Drill.
  • Pins (to support the tile up until the adhesive bonds and dries off).
  • Level.

Crucial: Ensure your surface is always dust, dirt and moisture-free or there’s a chance your adhesive might not appropriately bond.

For the majority of kinds of masonry, ceramic and vinyl tiles will stick– but for wooden surfaces, you’ll require to use a coat of paint or prime.

How do I prep drywall for a fresh tile setup?

Fresh drywall requires approximately a month prior to it’s ready for tiling, however when the time comes, you won’t have to tape the joints. All you’ll require to do is use a skim coat and sand. Once done, tidy the surface from dust, dry any signs of moisture and use the adhesive.

Crucial: For areas abundant with wetness, use waterproof plasterboard.

How do I prep old drywall for a fresh tile setup?

It’s crucial to appropriately evaluate whether the wall is steady and strong sufficient to hold the weight of fresh tiling. You should always ask for recommendations from a knowledgeable tiler if you’re uncertain.

Fill out any fractures or holes from pins, nails or any other type of wall fitting, use the guide, leave it to dry, sand one more time, and then use the adhesive.

How do I prep the wall for tiles if the drywall is already painted or textured?

According to experts, you need to apply PVA or make a Do It Yourself primer by adding a bit more water to your adhesive.

After that, there are a few essential tasks to look after:.

  • Remove depreciated paint.
  • Repair cracks and holes.
  • If bumps are present, sand.
  • Wipe the surface area.
  • Make certain there are no signs of oil or grease.

Handy tip: Deal with the wall with Trisodium Phosphate (TSP). It’s an effective cleaner, stain remover and degreaser– but remember that this should, obviously, be kept well away from children.

How do I prep a plywood surface area for fresh tiling?

When it comes to walls, the fact is that plywood is appropriate for tiling your floorings however not as practical. The product is made from compressed wood combined with numerous oils, which means that heat can affect it. , if exposed to frequent and dramatic remarkable in significant, regular and grout will temperature level crack.

How do I prep a wallpapered wall for tiling?

When it comes to walls, tiles use much more durability and usefulness than wallpaper, and the very best option is to remove wallpaper anywhere possible. The most hassle-free and efficient way is by exposing the space to steam– but this method does feature some risks. The high temperature levels and wetness can potentially cause damage which is frequently beyond simple repair work if you’re dealing with drywall or engineered wood via steam.

You can just clean the surface with a warm and damp rag. By doing this, wetness won’t permeate through to the substrate itself– but at the same time, the wallpaper will chill out. Repeat the procedure a couple of times and utilize a scraper to peel whatever with minimal effort.

Once done, all you’ll need to do prior to using guide or adhesive is to make sure the surface is tidy and dry.

You can set up brand-new tiles on different surfaces, as long you prepare the wall properly. When correct preparation is done, you can easily apply adhesive and stick your fresh tiles straight onto the wall.

Areas with hollow space are easy to find, however beware– if you stop working to find these and tile over them anyway, you run the threat of having your fresh tiles collapse in the relatively near future.

The fact is that plywood is appropriate for tiling your floors but not as practical when it comes to walls. When it comes to walls, tiles use far more longevity and usefulness than wallpaper, and the finest choice is to get rid of wallpaper any place possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally resolved in place in an array to cover roofs, floors, walls, edges, or other objects such as tabletops. Alternatively, tile can sometimes adopt to similar units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In different sense, a tile is a construction tile or similar object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of afire clay.

Tiles are often used to form wall and floor coverings, and can range from simple square tiles to rarefied or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but supplementary materials are as a consequence commonly used, such as glass, cork, concrete and additional composite materials, and stone. Tiling stone is typically marble, onyx, granite or slate. Thinner tiles can be used upon walls than on floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button