WHY SELECT Modern Tiling

There are numerous tiling business in Dublin, however it’s constantly the most important to trust and choose. Your single click when searching for “local tilers near me” online or calling somebody over the phone can help you discover a tiler in Dublin. Selecting the right tiling system in Dublin can be a difficult job.

We are a licensed and certified tiling company in Dublin. Having a number of years of experience and experienced commercial tilers in Dublin, we can enthrall the look of your place with our lovely ceramic tiles.

How to Prepare a Wall for Tiling (Detailed + Top Tips).

tilers

Preparing your walls for a fresh wall tile installation is hassle-free and easy with our no-nonsense guide ready.

You can install new tiles on various surfaces, as long you prepare the wall appropriately. Just make sure the surface is level enough, and dust and dirt-free– and that there are no signs of residual wetness. When proper preparation is done, you can quickly use adhesive and stick your fresh tiles straight onto the wall.

How to prepare for tiling a wall:.

  • Remove old fittings, such as pins, screws, rivets etc
  • Repair work or eliminate unfit plaster.
  • Get rid of or pre-treat wallpaper (if present).
  • Fix any fractures or indications of damage.
  • Level the surface area.
  • Sand, so that the adhesive can bond.
  • Make sure the surface area is dirt, grease-free and dust.
  • Pick the appropriate guide for your kind of surface.

Other crucial preparation to do before you start:

  • Procedure your square video.
  • Find out the number of tiles required for the task.
  • Buy at least 10% more tiles in case of damage throughout the installation. You may want to increase the quantity to 20% or even 30% additional if you’re about to set up fragile patterns. There are no guarantees when it pertains to discovering the same batch, or even one that will carefully resemble what you bought, even more down the line, so this is extremely recommended.

Make certain you have the ideal type of adhesive.

According to the professional tradespersons from Wonderful Tilers, less experienced DIY lovers can utilize the ready-mix type of adhesive, but a professional tiler will always apply the powdered service. It dries slower and thus enables you to better adjust and line up the entire wall tiling.

Helpful tip: When tiling kitchen splashbacks or damp spaces, or setting up restroom tiles in general, adhesive should be waterproof.

Make certain the wall is level or your tile installation may not achieve success.

Tiling an irregular wall has the potential to result in disaster. An easy way to identify irregularities is by positioning something long and flat (i.e. a regular slab) on the wall and moving it throughout. This way, you can identify any inflamed locations or bumps, must they exist.

An uneven wall can prevent adhesive from sticking– which might trigger your whole wall setup to collapse. According to professional tilers, anything in between 3 and 6mm is still workable– however anything beyond that is likely to cause trouble.

If you decide to use a somewhat thicker layer of adhesive to compensate, its grip may loosen– causing undesirable issues further down the line.

Different surface areas require various means of preparation.

Some surfaces, such as a fresh drywall, require a minimum of a month to correctly dry. Other cases, such as when you’re tiling on wood, need a coat of polyurethane paint. Make certain you have the ideal solution for your particular wall and, whenever in doubt, consult with a professional tiler.

Tile board backers are a terrific method to handle uneven surface areas with minimal effort.

Although somewhat more expensive, tile board backers can help you resolve the issue– not to mention that these products are resistant to wetness, and can effectively avoid mould (which is understood to grow on porous products in warm, moist conditions). This advantage makes tile backer boards a practical option for locations, bathrooms and showers surrounding the kitchen sink.

The one drawback of tile backer boards is that making use of such items will make your fresh tile setup a little bit more pricey.

Useful pointer: One vital thing to ensure of here is that the boards are well-mounted and tough.

Can you set up new tiles on top of old tiles?

Tiling over old tiles is possible– however it’s constantly better to retile and get rid of.

A lot of tiles are too smooth for adhesive to properly bond and, in these cases, extra treatment is required. Depending upon the toolkit you have at hand, you could either try a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, show extra caution so as not to damage the stability of your old tiling.

Crucial: Constantly check for void behind old tiles. To do this, simply knock on each piece with your hand and listen out for hollow sounds. Locations with hollow space are simple to find, however beware– if you stop working to find these and tile over them anyhow, you risk of having your fresh tiles collapse in the reasonably future.

tiling tools

What tools will I require for a Do It Yourself tile setup?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Regular utility knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a similar tool).
  • Pencil.
  • Measuring tape.
  • Drill.
  • Pins (to support the tile until the adhesive bonds and dries off).
  • Level.

Crucial: Ensure your surface is always dust, dirt and moisture-free or there’s a possibility your adhesive may not effectively bond.

For most types of masonry, ceramic and vinyl tiles will stick– but for wooden surfaces, you’ll need to apply a coat of paint or prime.

How do I prep drywall for a fresh tile installation?

Fresh drywall needs approximately a month before it’s ready for tiling, however when the time comes, you won’t have to tape the joints. All you’ll need to do is use a skim coat and sand. As soon as done, clean the surface from dust, dry any signs of wetness and use the adhesive.

Essential: For locations rich with wetness, use waterproof plasterboard.

How do I prep old drywall for a fresh tile setup?

It’s essential to properly assess whether the wall is strong and stable adequate to hold the weight of fresh tiling. You should always ask for advice from a knowledgeable tiler if you’re not sure.

Fill out any fractures or holes from pins, nails or any other kind of wall fitting, apply the primer, leave it to dry, sand one more time, and then use the adhesive.

How do I prep the wall for tiles if the drywall is currently painted or textured?

According to professionals, you should use PVA or make a Do It Yourself primer by adding a bit more water to your adhesive.

After that, there are a couple of essential tasks to look after:.

  • Eliminate diminished paint.
  • Repair cracks and holes.
  • If bumps are present, sand.
  • Clean the surface area.
  • Make certain there are no indications of oil or grease.

Useful suggestion: Treat the wall with Trisodium Phosphate (TSP). It’s an effective cleaner, stain cleaner and degreaser– however keep in mind that this should, obviously, be kept well away from kids.

How do I prep a plywood surface area for fresh tiling?

When it comes to walls, the fact is that plywood is ideal for tiling your floorings but not as practical. The product is made from compressed wood combined with different oils, which indicates that heat can affect it. If exposed to regular and remarkable modifications in temperature, tiles and grout will likely break.

How do I prep a wallpapered wall for tiling?

When it comes to walls, tiles use even more longevity and functionality than wallpaper, and the best option is to eliminate wallpaper anywhere possible. The most efficient and hassle-free way is by exposing the room to steam– but this method does include some risks. The high temperature levels and moisture can potentially trigger damage which is often beyond basic repair work if you’re treating drywall or crafted wood through steam.

You can just wipe the surface with a warm and wet rag. In this manner, moisture won’t permeate through to the substrate itself– but at the same time, the wallpaper will loosen up. Repeat the treatment a few times and use a scraper to peel whatever with minimal effort.

As soon as done, all you’ll require to do prior to using primer or adhesive is to make certain the surface is tidy and dry.

You can set up new tiles on numerous surfaces, as long you prepare the wall properly. When correct preparation is done, you can easily use adhesive and stick your fresh tiles straight onto the wall.

Locations with hollow area are easy to identify, however beware– if you fail to identify these and tile over them anyway, you run the risk of having your fresh tiles collapse in the reasonably near future.

The truth is that plywood is suitable for tiling your floorings however not as useful when it comes to walls. When it comes to walls, tiles use far more longevity and functionality than wallpaper, and the best choice is to get rid of wallpaper any place possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally unmovable in place in an array to lid roofs, floors, walls, edges, or other objects such as tabletops. Alternatively, tile can sometimes refer to thesame units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In choice sense, a tile is a construction tile or similar object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of passionate clay.

Tiles are often used to form wall and floor coverings, and can range from simple square tiles to highbrow or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but additional materials are also commonly used, such as glass, cork, concrete and other composite materials, and stone. Tiling stone is typically marble, onyx, granite or slate. Thinner tiles can be used upon walls than on floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button