WHY PICK ModernTiling.ie

There are numerous tiling companies in Dublin, but it’s constantly the most crucial to trust and choose. Your single click when browsing for “regional tilers near me” online or calling somebody over the phone can assist you discover a tiler in Dublin. Choosing the right tiling system in Dublin can be a daunting task.

We are a certified and certified tiling firm in Dublin. Having several years of experience and knowledgeable business tilers in Dublin, we can enthrall the appearance of your location with our gorgeous ceramic tiles.

How to Prepare a Wall for Tiling (Leading + step-by-step Tips)

Preparing your walls for a fresh wall tile installation is simple and problem-free with our no-nonsense guide ready.

You can set up brand-new tiles on numerous surfaces, as long you prepare the wall properly. Simply make certain the surface is level enough, and dust and dirt-free– which there are no signs of residual wetness. When correct preparation is done, you can quickly use adhesive and stick your fresh tiles straight onto the wall.

How to prepare for tiling a wall:.

  • Eliminate old fittings, such as pins, screws, rivets etc
  • Repair work or eliminate unsuited plaster.
  • If present), get rid of or pre-treat wallpaper (.
  • Repair any cracks or indications of damage.
  • Level the surface area.
  • Sand, so that the adhesive can bond.
  • Make sure the surface area is dust, dirt and grease-free.
  • Choose the appropriate guide for your type of surface area.

Other essential planning to do prior to you get going:

  • Measure your square footage.
  • Figure out the variety of tiles needed for the job.
  • Purchase least 10% more tiles in case of breakage throughout the installation. You may wish to increase the amount to 20% or even 30% extra if you’re about to set up delicate patterns. There are no guarantees when it pertains to discovering the exact same batch, and even one that will closely resemble what you purchased, even more down the line, so this is highly suggested.

Make certain you have the best kind of adhesive.

According to the expert tradesmen from Great Tilers, less skilled Do It Yourself enthusiasts can use the ready-mix kind of adhesive, but an expert tiler will always apply the powdered option. It dries slower and therefore allows you to much better adjust and line up the whole wall tiling.

Valuable pointer: When tiling cooking area splashbacks or wet spaces, or installing restroom tiles in general, adhesive must be water-resistant.

Make certain the wall is level or your tile installation may not succeed.

Tiling an uneven wall has the possible to result in catastrophe. An easy method to spot abnormalities is by putting something long and flat (i.e. a routine plank) on the wall and moving it throughout. In this manner, you can determine any swollen locations or bumps, must they exist.

An irregular wall can avoid adhesive from sticking– which might cause your entire wall setup to collapse. According to professional tilers, anything in between 3 and 6mm is still convenient– but anything beyond that is most likely to cause trouble.

Its grip might loosen up– leading to unwanted issues even more down the line if you choose to apply a slightly thicker layer of adhesive to compensate.

Various surfaces require various ways of preparation.

Some surfaces, such as a fresh drywall, require at least a month to correctly dry. Other cases, such as when you’re tiling on wood, require a coat of polyurethane paint. Make sure you have the right service for your particular wall and, whenever in doubt, consult with a professional tiler.

Tile board backers are a terrific method to manage uneven surface areas with minimal effort.

Slightly more expensive, tile board backers can help you fix the issue– not to discuss that these products are resistant to moisture, and can effectively avoid mould (which is known to grow on permeable materials in warm, moist conditions). This advantage makes tile backer boards an useful solution for showers, restrooms and locations surrounding the cooking area sink.

The one downside of tile backer boards is that making use of such items will make your fresh tile installation a little bit more pricey.

Helpful pointer: One essential thing to make certain of here is that the boards are strong and well-mounted.

Can you set up new tiles on top of old tiles?

Tiling over old tiles is possible– however it’s constantly better to retile and get rid of.

A lot of tiles are too smooth for adhesive to properly bond and, in these cases, additional treatment is needed. Depending on the toolkit you have at hand, you could either try a sander (with medium to coarse sandpaper) or a grinding disc. You should, however, act with extra care so as not to damage the stability of your old tiling.

Crucial: Always examine for void behind old tiles. To do this, just knock on each piece with your hand and listen out for hollow noises. Locations with hollow space are easy to spot, however beware– if you stop working to identify these and tile over them anyway, you run the risk of having your fresh tiles collapse in the relatively future.

tiling tools

What tools will I need for a DIY tile setup?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Regular energy knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a comparable tool).
  • Pencil.
  • Determining tape.
  • Drill.
  • Pins (to support the tile till the adhesive bonds and dries off).
  • Level.

Essential: Make sure your surface is constantly dust, dirt and moisture-free or there’s a possibility your adhesive might not appropriately bond.

For most types of masonry, ceramic and vinyl tiles will stick– but for wood surfaces, you’ll require to use a coat of paint or prime.

How do I prep drywall for a fresh tile setup?

Fresh drywall needs up to a month before it’s ready for tiling, but when the time comes, you will not need to tape the joints. All you’ll need to do is apply a skim coat and sand. As soon as done, tidy the surface area from dust, dry any indications of moisture and use the adhesive.

Important: For locations rich with wetness, usage water-resistant plasterboard.

How do I prep old drywall for a fresh tile installation?

It’s vital to correctly assess whether the wall is strong and steady sufficient to hold the weight of fresh tiling. If you’re unsure, you ought to always request guidance from a knowledgeable tiler.

Fill in any cracks or holes from pins, nails or any other type of wall fitting, use the primer, leave it to dry, sand one more time, and then apply the adhesive.

How do I prep the wall for tiles if the drywall is currently painted or textured?

According to specialists, you should apply PVA or make a DIY guide by including a bit more water to your adhesive.

After that, there are a few important jobs to look after:.

  • Get rid of diminished paint.
  • Repair cracks and holes.
  • Sand if bumps exist.
  • Wipe the surface area.
  • Make certain there are no signs of oil or grease.

Practical tip: Treat the wall with Trisodium Phosphate (TSP). It’s an effective cleaning agent, stain remover and degreaser– but bear in mind that this should, of course, be kept well away from children.

How do I prep a plywood surface for fresh tiling?

The truth is that plywood appropriates for tiling your floorings but not as useful when it concerns walls. The product is made from compressed wood blended with various oils, which implies that heat can affect it. If exposed to regular and dramatic modifications in temperature, tiles and grout will likely break.

How do I prep a wallpapered wall for tiling?

When it comes to walls, tiles provide even more durability and practicality than wallpaper, and the very best option is to remove wallpaper any place possible. The most effective and hassle-free way is by exposing the room to steam– however this technique does feature some risks. The high temperatures and wetness can possibly cause damage which is often beyond easy repair work if you’re dealing with drywall or engineered wood by means of steam.

You can just wipe the surface area with a warm and damp rag. By doing this, wetness won’t permeate through to the substrate itself– however at the same time, the wallpaper will chill out. Repeat the procedure a couple of times and use a scraper to peel everything with very little effort.

When done, all you’ll need to do prior to applying guide or adhesive is to make certain the surface area is dry and tidy.

You can set up new tiles on various surface areas, as long you prepare the wall appropriately. When correct preparation is done, you can quickly use adhesive and stick your fresh tiles straight onto the wall.

Locations with hollow space are simple to spot, but beware– if you fail to find these and tile over them anyhow, you run the risk of having your fresh tiles collapse in the relatively near future.

The truth is that plywood is suitable for tiling your floors however not as practical when it comes to walls. When it comes to walls, tiles provide far more durability and functionality than wallpaper, and the finest alternative is to remove wallpaper anywhere possible.

Watch this video and learn how to tile kitchen wall

Call Now Button