WHY SELECT Modern Tiling

There are several tiling companies in Dublin, but it’s constantly the most essential to trust and choose. Your single click when browsing for “local tilers near me” online or calling someone over the phone can help you find a tiler in Dublin. Picking the right tiling system in Dublin can be a difficult job.

We are a licensed and certified tiling agency in Dublin. Having a number of years of experience and proficient commercial tilers in Dublin, we can mesmerize the look of your location with our stunning ceramic tiles.

How to Prepare a Wall for Tiling (Top + detailed Tips).

tilers

Preparing your walls for a fresh wall tile setup is problem-free and basic with our no-nonsense guide ready.

You can install new tiles on various surfaces, as long you prepare the wall properly. Just make certain the surface is level enough, and dust and dirt-free– which there are no indications of residual wetness. When proper preparation is done, you can quickly apply adhesive and stick your fresh tiles straight onto the wall.

How to prepare for tiling a wall:.

  • Get rid of old fittings, such as pins, screws, rivets etc
  • Repair or eliminate unsuited plaster.
  • Eliminate or pre-treat wallpaper (if present).
  • Repair any fractures or signs of damage.
  • Level the surface.
  • Sand, so that the adhesive can bond.
  • Ensure the surface is dirt, dust and grease-free.
  • Pick the appropriate guide for your kind of surface.

Other crucial planning to do prior to you get started:

  • Measure your square video.
  • Figure out the variety of tiles required for the job.
  • Buy at least 10% more tiles in case of damage during the installation. You might wish to increase the quantity to 20% or even 30% extra if you’re about to install fragile patterns. There are no warranties when it concerns finding the exact same batch, or perhaps one that will closely resemble what you bought, further down the line, so this is highly advised.

Ensure you have the right kind of adhesive.

According to the expert tradesmen from Fantastic Tilers, less experienced Do It Yourself lovers can utilize the ready-mix kind of adhesive, however an expert tiler will constantly apply the powdered solution. It dries slower and therefore enables you to better adjust and align the entire wall tiling.

Useful tip: When tiling cooking area splashbacks or wet rooms, or installing bathroom tiles in general, adhesive should be waterproof.

Make certain the wall is level or your tile installation might not achieve success.

Tiling an uneven wall has the prospective to lead to catastrophe. An easy method to find irregularities is by placing something long and flat (i.e. a regular slab) on the wall and moving it across. By doing this, you can determine any inflamed areas or bumps, must they exist.

An irregular wall can avoid adhesive from sticking– which could cause your whole wall setup to collapse. According to expert tilers, anything between 3 and 6mm is still workable– however anything beyond that is likely to cause trouble.

If you choose to apply a slightly thicker layer of adhesive to compensate, its grip might loosen– resulting in unwanted concerns further down the line.

Different surface areas need various means of preparation.

Some surfaces, such as a fresh drywall, need at least a month to appropriately dry. Other cases, such as when you’re tiling on wood, need a coat of polyurethane paint. Ensure you have the right service for your particular wall and, whenever in doubt, seek advice from a professional tiler.

Tile board backers are a fantastic way to handle uneven surfaces with very little effort.

Although somewhat costlier, tile board backers can assist you fix the issue– not to mention that these items are resistant to moisture, and can effectively avoid mould (which is understood to grow on porous products in warm, wet conditions). This advantage makes tile backer boards a practical solution for areas, showers and restrooms surrounding the kitchen sink.

The one drawback of tile backer boards is that using such items will make your fresh tile installation a little more expensive.

Helpful idea: One important thing to make sure of here is that the boards are sturdy and well-mounted.

Can you set up new tiles on top of old tiles?

Tiling over old tiles is possible– but it’s always much better to remove and retile.

Most tiles are too smooth for adhesive to properly bond and, in these cases, additional treatment is required. Depending upon the toolkit you have at hand, you might either attempt a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, show additional care so as not to damage the stability of your old tiling.

Crucial: Always check for void behind old tiles. To do this, just knock on each piece with your hand and listen out for hollow noises. Areas with hollow area are easy to find, however beware– if you fail to identify these and tile over them anyway, you risk of having your fresh tiles collapse in the fairly future.

tiling tools

What tools will I require for a Do It Yourself tile setup?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Regular energy knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a comparable tool).
  • Pencil.
  • Measuring tape.
  • Drill.
  • Pins (to support the tile until the adhesive bonds and dries off).
  • Level.

Crucial: Make certain your surface area is constantly dust, dirt and moisture-free or there’s a chance your adhesive may not appropriately bond.

For the majority of types of masonry, ceramic and vinyl tiles will stick– but for wood surfaces, you’ll require to apply a coat of paint or prime.

How do I prep drywall for a fresh tile installation?

Fresh drywall requires up to a month before it’s ready for tiling, however when the time comes, you won’t have to tape the joints. All you’ll need to do is apply a skim coat and sand. When done, clean the surface from dust, dry any indications of wetness and apply the adhesive.

Important: For areas rich with moisture, usage waterproof plasterboard.

How do I prep old drywall for a fresh tile installation?

It’s important to effectively examine whether the wall is strong and stable enough to hold the weight of fresh tiling. You need to always ask for advice from a knowledgeable tiler if you’re unsure.

Complete any cracks or holes from pins, nails or any other type of wall fitting, apply the primer, leave it to dry, sand one more time, and after that apply the adhesive.

How do I prep the wall for tiles if the drywall is currently painted or textured?

According to experts, you must apply PVA or make a DIY guide by adding a bit more water to your adhesive.

After that, there are a few essential jobs to take care of:.

  • Remove depreciated paint.
  • Repair fractures and holes.
  • If bumps are present, sand.
  • Wipe the surface area.
  • Make sure there are no signs of oil or grease.

Useful suggestion: Deal with the wall with Trisodium Phosphate (TSP). It’s an effective cleaning agent, stain cleaner and degreaser– but remember that this should, of course, be kept well away from kids.

How do I prep a plywood surface area for fresh tiling?

The reality is that plywood appropriates for tiling your floorings however not as practical when it pertains to walls. The product is made from compressed wood combined with numerous oils, which implies that heat can affect it. If exposed to remarkable and frequent changes in temperature, tiles and grout will likely break.

How do I prep a wallpapered wall for tiling?

When it concerns walls, tiles use far more longevity and usefulness than wallpaper, and the very best option is to get rid of wallpaper wherever possible. The most hassle-free and effective way is by exposing the room to steam– but this approach does include some threats. The high temperature levels and wetness can possibly cause damage which is typically beyond simple repair work if you’re treating drywall or crafted wood via steam.

You can merely clean the surface with a wet and warm rag. This way, moisture won’t penetrate through to the substrate itself– but at the same time, the wallpaper will loosen up. Repeat the procedure a few times and use a scraper to peel whatever with very little effort.

Once done, all you’ll require to do prior to using guide or adhesive is to ensure the surface area is tidy and dry.

You can install new tiles on numerous surface areas, as long you prepare the wall properly. When proper preparation is done, you can easily apply adhesive and stick your fresh tiles straight onto the wall.

Locations with hollow space are easy to find, but beware– if you stop working to spot these and tile over them anyway, you run the threat of having your fresh tiles collapse in the relatively near future.

The reality is that plywood is ideal for tiling your floors however not as useful when it comes to walls. When it comes to walls, tiles provide far more durability and functionality than wallpaper, and the best alternative is to eliminate wallpaper anywhere possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally definite in place in an array to lid roofs, floors, walls, edges, or extra objects such as tabletops. Alternatively, tile can sometimes take in hand to same units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In unconventional sense, a tile is a construction tile or same object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of fired clay.

Tiles are often used to form wall and floor coverings, and can range from simple square tiles to technical or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but new materials are afterward commonly used, such as glass, cork, concrete and extra composite materials, and stone. Tiling stone is typically marble, onyx, granite or slate. Thinner tiles can be used upon walls than on floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button