WHY CHOOSE ModernTiling.ie

There are a number of tiling business in Dublin, but it’s always the most important to trust and select. Your single click when searching for “regional tilers near me” online or calling someone over the phone can help you find a tiler in Dublin. Selecting the ideal tiling system in Dublin can be a complicated job.

We are a licensed and qualified tiling agency in Dublin. Having a number of years of experience and experienced business tilers in Dublin, we can mesmerize the appearance of your location with our gorgeous ceramic tiles.

How to Prepare a Wall for Tiling (Step-by-Step + Top Tips).

tilers

Preparing your walls for a fresh wall tile setup is problem-free and basic with our no-nonsense guide ready.

You can install new tiles on different surface areas, as long you prepare the wall properly. Simply make certain the surface is level enough, and dust and dirt-free– which there are no indications of residual wetness. When correct preparation is done, you can easily use adhesive and stick your fresh tiles straight onto the wall.

How to prepare for tiling a wall:.

  • Get rid of old fittings, such as pins, screws, rivets and so on
  • Repair or remove unfit plaster.
  • Eliminate or pre-treat wallpaper (if present).
  • Repair any fractures or signs of damage.
  • Level the surface area.
  • Sand, so that the adhesive can bond.
  • Make sure the surface area is dirt, grease-free and dust.
  • Choose the proper guide for your kind of surface.

Other essential planning to do prior to you get started:

  • Measure your square video.
  • Determine the number of tiles needed for the task.
  • Purchase least 10% more tiles in case of damage during the installation. You may wish to increase the quantity to 20% or even 30% extra if you’re about to set up fragile patterns. There are no warranties when it comes to finding the very same batch, and even one that will closely resemble what you bought, further down the line, so this is extremely recommended.

Make sure you have the right type of adhesive.

According to the professional tradesmen from Fantastic Tilers, less skilled DIY lovers can use the ready-mix kind of adhesive, but a professional tiler will always use the powdered solution. It dries slower and hence permits you to better adjust and line up the entire wall tiling.

Helpful pointer: When tiling kitchen splashbacks or damp rooms, or setting up restroom tiles in general, adhesive should be water-resistant.

Make certain the wall is level or your tile setup might not be successful.

Tiling an unequal wall has the prospective to lead to catastrophe. An easy method to find abnormalities is by positioning something long and flat (i.e. a regular plank) on the wall and moving it throughout. In this manner, you can determine any inflamed locations or bumps, ought to they exist.

An unequal wall can avoid adhesive from sticking– which might cause your whole wall setup to collapse. According to professional tilers, anything between 3 and 6mm is still practical– however anything beyond that is most likely to cause trouble.

If you choose to use a slightly thicker layer of adhesive to compensate, its grip may loosen– resulting in undesirable problems even more down the line.

Different surfaces require different means of preparation.

Some surfaces, such as a fresh drywall, require a minimum of a month to correctly dry. Other cases, such as when you’re tiling on wood, require a coat of polyurethane paint. Make certain you have the right service for your specific wall and, whenever in doubt, consult with an expert tiler.

Tile board backers are an excellent way to manage uneven surface areas with very little effort.

Although somewhat pricier, tile board backers can help you resolve the problem– not to mention that these products are resistant to moisture, and can successfully avoid mould (which is understood to grow on permeable materials in warm, wet conditions). This benefit makes tile backer boards a practical service for areas, showers and bathrooms surrounding the kitchen sink.

The one disadvantage of tile backer boards is that making use of such products will make your fresh tile installation a bit more costly.

Valuable idea: One crucial thing to ensure of here is that the boards are durable and well-mounted.

Can you install brand-new tiles on top of old tiles?

Tiling over old tiles is possible– however it’s constantly much better to retile and eliminate.

The majority of tiles are too smooth for adhesive to appropriately bond and, in these cases, extra treatment is needed. Depending upon the toolkit you have at hand, you could either try a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, act with additional care so as not to damage the stability of your old tiling.

Crucial: Always check for void behind old tiles. To do this, simply knock on each piece with your hand and listen out for hollow noises. Locations with hollow area are simple to find, but beware– if you fail to find these and tile over them anyhow, you risk of having your fresh tiles collapse in the reasonably near future.

tiling tools

What tools will I need for a DIY tile installation?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Regular energy knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a comparable tool).
  • Pencil.
  • Measuring tape.
  • Drill.
  • Pins (to support the tile till the adhesive bonds and dries off).
  • Level.

Important: Make sure your surface area is constantly dust, dirt and moisture-free or there’s a chance your adhesive may not effectively bond.

For a lot of types of masonry, ceramic and vinyl tiles will stick– but for wooden surfaces, you’ll require to apply a coat of paint or prime.

How do I prep drywall for a fresh tile installation?

Fresh drywall needs approximately a month before it’s ready for tiling, however when the time comes, you will not need to tape the joints. All you’ll need to do is apply a skim coat and sand. When done, clean the surface from dust, dry any indications of moisture and apply the adhesive.

Essential: For areas abundant with wetness, usage waterproof plasterboard.

How do I prep old drywall for a fresh tile setup?

It’s vital to effectively examine whether the wall is steady and strong sufficient to hold the weight of fresh tiling. If you’re unsure, you should always request suggestions from a knowledgeable tiler.

Complete any fractures or holes from pins, nails or any other kind of wall fitting, apply the primer, leave it to dry, sand one more time, and after that use the adhesive.

How do I prep the wall for tiles if the drywall is already painted or textured?

According to professionals, you ought to apply PVA or make a Do It Yourself guide by including a bit more water to your adhesive.

After that, there are a couple of important jobs to look after:.

  • Eliminate depreciated paint.
  • Repair cracks and holes.
  • If bumps are present, sand.
  • Wipe the surface area.
  • Make certain there are no signs of oil or grease.

Useful tip: Deal with the wall with Trisodium Phosphate (TSP). It’s an effective cleaning agent, stain eliminator and degreaser– but bear in mind that this should, obviously, be kept well away from children.

How do I prep a plywood surface area for fresh tiling?

The fact is that plywood is suitable for tiling your floors however not as useful when it pertains to walls. The product is made of compressed wood combined with different oils, which means that heat can impact it. If exposed to regular and remarkable modifications in temperature, tiles and grout will likely split.

How do I prep a wallpapered wall for tiling?

When it comes to walls, tiles offer even more durability and usefulness than wallpaper, and the very best option is to remove wallpaper any place possible. The most problem-free and effective way is by exposing the space to steam– but this technique does come with some risks. If you’re dealing with drywall or engineered wood through steam, the heats and moisture can potentially cause damage which is frequently beyond basic repair work.

Additionally, you can merely clean the surface area with a warm and damp rag. This way, wetness won’t penetrate through to the substrate itself– however at the same time, the wallpaper will chill out. Repeat the procedure a couple of times and use a scraper to peel everything with minimal effort.

When done, all you’ll need to do prior to applying guide or adhesive is to make sure the surface area is dry and tidy.

You can set up new tiles on various surfaces, as long you prepare the wall appropriately. When appropriate preparation is done, you can quickly apply adhesive and stick your fresh tiles straight onto the wall.

Areas with hollow area are easy to spot, however beware– if you stop working to spot these and tile over them anyway, you run the risk of having your fresh tiles collapse in the reasonably near future.

The fact is that plywood is suitable for tiling your floorings however not as practical when it comes to walls. When it comes to walls, tiles provide far more durability and functionality than wallpaper, and the best choice is to eliminate wallpaper any place possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally utter in place in an array to lid roofs, floors, walls, edges, or supplementary objects such as tabletops. Alternatively, tile can sometimes attend to to thesame units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In substitute sense, a tile is a construction tile or same object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of enthusiastic clay.

Tiles are often used to form wall and floor coverings, and can range from simple square tiles to highbrow or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but new materials are as well as commonly used, such as glass, cork, concrete and additional composite materials, and stone. Tiling stone is typically marble, onyx, granite or slate. Thinner tiles can be used upon walls than on floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button