WHY PICK ModernTiling

There are numerous tiling business in Dublin, but it’s always the most essential to trust and choose. Your single click when browsing for “local tilers near me” online or calling someone over the phone can assist you find a tiler in Dublin. Selecting the best tiling system in Dublin can be a difficult job.

We are a qualified and certified tiling firm in Dublin. Having a number of years of experience and skilled business tilers in Dublin, we can mesmerize the look of your location with our beautiful ceramic tiles.

How to Prepare a Wall for Tiling (Top + detailed Tips).


Preparing your walls for a fresh wall tile installation is basic and problem-free with our no-nonsense guide ready.

You can set up new tiles on different surface areas, as long you prepare the wall appropriately. Just make certain the surface is level enough, and dust and dirt-free– and that there are no indications of recurring moisture. When correct preparation is done, you can easily apply adhesive and stick your fresh tiles straight onto the wall.

How to get ready for tiling a wall:.

  • Get rid of old fittings, such as pins, screws, rivets and so on
  • Repair work or eliminate unsuited plaster.
  • If present), get rid of or pre-treat wallpaper (.
  • Repair any fractures or indications of damage.
  • Level the surface.
  • Sand, so that the adhesive can bond.
  • Ensure the surface is dust, dirt and grease-free.
  • Select the suitable primer for your type of surface.

Other crucial preparation to do before you start:

  • Step your square video footage.
  • Determine the variety of tiles required for the task.
  • Purchase least 10% more tiles in case of breakage during the setup. If you will install fragile patterns, you may want to increase the total up to 20% or perhaps 30% extra. There are no warranties when it pertains to finding the exact same batch, or even one that will carefully resemble what you bought, further down the line, so this is highly suggested.

Ensure you have the best type of adhesive.

According to the professional tradesmen from Fantastic Tilers, less knowledgeable DIY enthusiasts can utilize the ready-mix type of adhesive, however an expert tiler will always apply the powdered service. It dries slower and therefore allows you to better change and line up the entire wall tiling.

Practical idea: When tiling cooking area splashbacks or damp rooms, or installing restroom tiles in general, adhesive should be waterproof.

Make certain the wall is level or your tile setup might not succeed.

Tiling an uneven wall has the potential to lead to disaster. An easy way to find irregularities is by placing something long and flat (i.e. a regular plank) on the wall and sliding it throughout. This way, you can determine any inflamed areas or bumps, need to they exist.

An unequal wall can avoid adhesive from sticking– which could cause your whole wall installation to collapse. According to professional tilers, anything in between 3 and 6mm is still workable– but anything beyond that is likely to cause trouble.

If you decide to apply a slightly thicker layer of adhesive to compensate, its grip may loosen– leading to undesirable concerns further down the line.

Different surface areas need different means of preparation.

Some surfaces, such as a fresh drywall, need a minimum of a month to appropriately dry. Other cases, such as when you’re tiling on wood, require a coat of polyurethane paint. Make sure you have the ideal service for your particular wall and, whenever in doubt, talk to a professional tiler.

Tile board backers are a terrific method to handle uneven surfaces with minimal effort.

Somewhat costlier, tile board backers can assist you solve the problem– not to mention that these items are resistant to moisture, and can effectively prevent mould (which is understood to grow on permeable products in warm, moist conditions). This advantage makes tile backer boards a practical service for showers, areas and restrooms surrounding the kitchen sink.

The one drawback of tile backer boards is that making use of such products will make your fresh tile installation a little more expensive.

Helpful pointer: One vital thing to ensure of here is that the boards are strong and well-mounted.

Can you set up new tiles on top of old tiles?

Tiling over old tiles is possible– but it’s always much better to remove and retile.

A lot of tiles are too smooth for adhesive to effectively bond and, in these cases, extra treatment is needed. Depending on the toolkit you have at hand, you might either try a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, show additional care so as not to harm the integrity of your old tiling.

Crucial: Always examine for void behind old tiles. To do this, merely knock on each piece with your hand and listen out for hollow sounds. Locations with hollow space are easy to find, but beware– if you stop working to identify these and tile over them anyway, you run the risk of having your fresh tiles collapse in the reasonably future.

tiling tools

What tools will I need for a DIY tile setup?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Regular utility knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a comparable tool).
  • Pencil.
  • Determining tape.
  • Drill.
  • Pins (to support the tile till the adhesive bonds and dries off).
  • Level.

Essential: Ensure your surface area is constantly dust, dirt and moisture-free or there’s an opportunity your adhesive may not properly bond.

For most kinds of masonry, ceramic and vinyl tiles will stick– but for wooden surfaces, you’ll need to use a coat of paint or prime.

How do I prep drywall for a fresh tile setup?

Fresh drywall needs as much as a month before it’s ready for tiling, however when the time comes, you will not have to tape the joints. All you’ll require to do is apply a skim coat and sand. When done, tidy the surface from dust, dry any signs of moisture and use the adhesive.

Important: For areas abundant with moisture, usage water-resistant plasterboard.

How do I prep old drywall for a fresh tile installation?

It’s important to appropriately examine whether the wall is stable and strong adequate to hold the weight of fresh tiling. You should always ask for suggestions from a knowledgeable tiler if you’re unsure.

Complete any cracks or holes from pins, nails or any other kind of wall fitting, apply the primer, leave it to dry, sand one more time, and after that use the adhesive.

How do I prep the wall for tiles if the drywall is currently painted or textured?

According to professionals, you must use PVA or make a DIY primer by including a bit more water to your adhesive.

After that, there are a few essential tasks to look after:.

  • Get rid of diminished paint.
  • Repair cracks and holes.
  • If bumps are present, sand.
  • Clean the surface area.
  • Ensure there are no signs of oil or grease.

Helpful suggestion: Deal with the wall with Trisodium Phosphate (TSP). It’s an effective cleaner, stain remover and degreaser– however bear in mind that this should, naturally, be kept well away from kids.

How do I prep a plywood surface for fresh tiling?

The truth is that plywood appropriates for tiling your floors but not as useful when it comes to walls. The material is made from compressed wood blended with numerous oils, which suggests that heat can impact it. , if exposed to frequent and dramatic significant in temperature, tiles and grout will likely crack.

How do I prep a wallpapered wall for tiling?

When it comes to walls, tiles offer far more longevity and usefulness than wallpaper, and the very best choice is to eliminate wallpaper wherever possible. The most hassle-free and efficient method is by exposing the room to steam– but this method does come with some threats. The high temperature levels and moisture can potentially cause damage which is often beyond simple repair work if you’re dealing with drywall or engineered wood by means of steam.

You can just clean the surface area with a warm and wet rag. This way, wetness won’t permeate through to the substrate itself– however at the same time, the wallpaper will loosen up. Repeat the procedure a few times and utilize a scraper to peel whatever with very little effort.

When done, all you’ll need to do prior to using primer or adhesive is to make certain the surface area is dry and clean.

You can install new tiles on different surface areas, as long you prepare the wall properly. When appropriate preparation is done, you can quickly apply adhesive and stick your fresh tiles straight onto the wall.

Locations with hollow area are easy to find, however beware– if you stop working to spot these and tile over them anyhow, you run the danger of having your fresh tiles collapse in the fairly near future.

The fact is that plywood is ideal for tiling your floors but not as useful when it comes to walls. When it comes to walls, tiles use far more longevity and functionality than wallpaper, and the best choice is to get rid of wallpaper any place possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally supreme in place in an array to lid roofs, floors, walls, edges, or supplementary objects such as tabletops. Alternatively, tile can sometimes deliver to thesame units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In unconventional sense, a tile is a construction tile or same object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of in flames clay.

Tiles are often used to form wall and floor coverings, and can range from easy square tiles to complex or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but supplementary materials are afterward commonly used, such as glass, cork, concrete and supplementary composite materials, and stone. Tiling stone is typically marble, onyx, granite or slate. Thinner tiles can be used upon walls than upon floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button