WHY CHOOSE ModernTiling.ie

There are numerous tiling companies in Dublin, but it’s always the most important to trust and select. Your single click when browsing for “regional tilers near me” online or calling someone over the phone can help you discover a tiler in Dublin. Choosing the ideal tiling system in Dublin can be an overwhelming job.

We are a licensed and qualified tiling company in Dublin. Having numerous years of experience and experienced industrial tilers in Dublin, we can enthrall the look of your location with our beautiful ceramic tiles.

How to Prepare a Wall for Tiling (Detailed + Leading Tips).

tilers

Preparing your walls for a fresh wall tile setup is problem-free and simple with our no-nonsense guide at the ready.

You can install new tiles on various surface areas, as long you prepare the wall properly. Just ensure the surface is level enough, and dust and dirt-free– which there are no indications of recurring wetness. When correct preparation is done, you can quickly use adhesive and stick your fresh tiles straight onto the wall.

How to get ready for tiling a wall:.

  • Get rid of old fittings, such as pins, screws, rivets and so on
  • Repair or eliminate unfit plaster.
  • Get rid of or pre-treat wallpaper (if present).
  • Fix any cracks or indications of damage.
  • Level the surface area.
  • Sand, so that the adhesive can bond.
  • Make certain the surface is dust, grease-free and dirt.
  • Select the appropriate primer for your type of surface area.

Other essential planning to do before you get going:

  • Measure your square footage.
  • Figure out the variety of tiles required for the task.
  • Buy at least 10% more tiles in case of breakage during the installation. You may wish to increase the quantity to 20% or even 30% extra if you’re about to set up delicate patterns. There are no guarantees when it pertains to finding the exact same batch, or perhaps one that will carefully resemble what you purchased, further down the line, so this is extremely advised.

Make sure you have the ideal kind of adhesive.

According to the expert tradespersons from Fantastic Tilers, less skilled Do It Yourself lovers can use the ready-mix kind of adhesive, but a professional tiler will always use the powdered service. It dries slower and thus permits you to better adjust and align the whole wall tiling.

Valuable pointer: When tiling kitchen area splashbacks or wet rooms, or setting up bathroom tiles in general, adhesive must be waterproof.

Make sure the wall is level or your tile setup might not achieve success.

Tiling an unequal wall has the possible to lead to catastrophe. An easy way to find abnormalities is by placing something long and flat (i.e. a regular slab) on the wall and sliding it throughout. By doing this, you can identify any inflamed locations or bumps, ought to they exist.

An unequal wall can avoid adhesive from sticking– which might trigger your whole wall setup to collapse. According to professional tilers, anything between 3 and 6mm is still practical– however anything beyond that is likely to cause trouble.

Its grip may loosen– leading to undesirable concerns even more down the line if you decide to use a slightly thicker layer of adhesive to compensate.

Different surfaces require various ways of preparation.

Some surfaces, such as a fresh drywall, require a minimum of a month to appropriately dry. Other cases, such as when you’re tiling on wood, need a coat of polyurethane paint. Ensure you have the right service for your particular wall and, whenever in doubt, talk to a professional tiler.

Tile board backers are a terrific way to manage uneven surfaces with very little effort.

Although somewhat costlier, tile board backers can assist you fix the issue– not to mention that these items are resistant to wetness, and can effectively prevent mould (which is understood to grow on porous materials in warm, wet conditions). This benefit makes tile backer boards a practical service for locations, showers and bathrooms surrounding the kitchen sink.

The one drawback of tile backer boards is that using such products will make your fresh tile setup a little bit more pricey.

Practical idea: One important thing to make sure of here is that the boards are well-mounted and tough.

Can you set up brand-new tiles on top of old tiles?

Tiling over old tiles is possible– however it’s constantly much better to remove and retile.

Many tiles are too smooth for adhesive to effectively bond and, in these cases, additional treatment is needed. Depending upon the toolkit you have at hand, you could either attempt a sander (with medium to coarse sandpaper) or a grinding disc. You should, however, act with extra care so as not to harm the stability of your old tiling.

Important: Always check for void behind old tiles. To do this, just knock on each piece with your hand and listen out for hollow noises. Locations with hollow area are easy to find, however beware– if you stop working to identify these and tile over them anyhow, you risk of having your fresh tiles collapse in the relatively near future.

tiling tools

What tools will I require for a DIY tile installation?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Routine energy knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a comparable tool).
  • Pencil.
  • Determining tape.
  • Drill.
  • Pins (to support the tile until the adhesive bonds and dries off).
  • Level.

Essential: Ensure your surface area is constantly dust, dirt and moisture-free or there’s an opportunity your adhesive might not appropriately bond.

For the majority of kinds of masonry, ceramic and vinyl tiles will stick– but for wood surface areas, you’ll need to apply a coat of paint or prime.

How do I prep drywall for a fresh tile setup?

Fresh drywall needs up to a month prior to it’s ready for tiling, but when the time comes, you will not have to tape the joints. All you’ll require to do is apply a skim coat and sand. When done, clean the surface from dust, dry any indications of moisture and use the adhesive.

Crucial: For locations abundant with wetness, usage waterproof plasterboard.

How do I prep old drywall for a fresh tile setup?

It’s vital to effectively examine whether the wall is strong and stable sufficient to hold the weight of fresh tiling. You need to always ask for guidance from an experienced tiler if you’re unsure.

Fill in any cracks or holes from pins, nails or any other type of wall fitting, apply the guide, leave it to dry, sand one more time, and then apply the adhesive.

How do I prep the wall for tiles if the drywall is already painted or textured?

According to experts, you should apply PVA or make a DIY primer by including a bit more water to your adhesive.

After that, there are a couple of essential tasks to take care of:.

  • Remove diminished paint.
  • Repair fractures and holes.
  • Sand if bumps are present.
  • Clean the surface.
  • Make certain there are no indications of oil or grease.

Practical suggestion: Treat the wall with Trisodium Phosphate (TSP). It’s an effective cleaning agent, stain eliminator and degreaser– however keep in mind that this should, naturally, be kept well away from kids.

How do I prep a plywood surface for fresh tiling?

The fact is that plywood appropriates for tiling your floorings but not as useful when it pertains to walls. The material is made from compressed wood mixed with numerous oils, which implies that heat can impact it. , if exposed to dramatic and frequent remarkable in significant, tiles and grout will likely crack.

How do I prep a wallpapered wall for tiling?

When it comes to walls, tiles use much more longevity and functionality than wallpaper, and the best alternative is to get rid of wallpaper anywhere possible. The most hassle-free and efficient way is by exposing the space to steam– however this technique does feature some risks. If you’re dealing with drywall or engineered wood by means of steam, the heats and wetness can potentially cause damage which is typically beyond basic repair.

You can just clean the surface area with a wet and warm rag. This way, wetness will not permeate through to the substrate itself– however at the same time, the wallpaper will relax. Repeat the procedure a couple of times and use a scraper to peel everything with very little effort.

As soon as done, all you’ll need to do prior to using guide or adhesive is to ensure the surface area is dry and clean.

You can install new tiles on different surface areas, as long you prepare the wall appropriately. When correct preparation is done, you can easily apply adhesive and stick your fresh tiles straight onto the wall.

Areas with hollow space are simple to find, however beware– if you fail to find these and tile over them anyway, you run the threat of having your fresh tiles collapse in the reasonably near future.

The truth is that plywood is suitable for tiling your floors but not as useful when it comes to walls. When it comes to walls, tiles offer far more durability and practicality than wallpaper, and the finest alternative is to get rid of wallpaper anywhere possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally unchangeable in place in an array to cover roofs, floors, walls, edges, or extra objects such as tabletops. Alternatively, tile can sometimes talk to to same units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In marginal sense, a tile is a construction tile or same object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of in flames clay.

Tiles are often used to form wall and floor coverings, and can range from simple square tiles to puzzling or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but extra materials are also commonly used, such as glass, cork, concrete and further composite materials, and stone. Tiling rock is typically marble, onyx, granite or slate. Thinner tiles can be used on walls than upon floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button