WHY PICK ModernTiling.ie

There are a number of tiling business in Dublin, but it’s constantly the most important to trust and pick. Your single click when searching for “local tilers near me” online or calling somebody over the phone can assist you discover a tiler in Dublin. Picking the ideal tiling system in Dublin can be a complicated job. The problem is who to contact the Dublin tiling centers. Do not believe all of you blindly. Modern Tiling may be the perfect option for your tiling requires.

We are a qualified and certified tiling company in Dublin. Having several years of experience and skilled business tilers in Dublin, we can mesmerize the look of your location with our gorgeous ceramic tiles.

How to Prepare a Wall for Tiling (Step-by-Step + Leading Tips).


Preparing your walls for a fresh wall tile setup is problem-free and simple with our no-nonsense guide at the ready.

You can set up brand-new tiles on various surface areas, as long you prepare the wall properly. Just make certain the surface is level enough, and dust and dirt-free– which there are no indications of recurring moisture. When proper preparation is done, you can quickly apply adhesive and stick your fresh tiles straight onto the wall.

How to get ready for tiling a wall:.

  • Get rid of old fittings, such as pins, screws, rivets and so on
  • Repair or eliminate unfit plaster.
  • Eliminate or pre-treat wallpaper (if present).
  • Fix any fractures or signs of damage.
  • Level the surface.
  • Sand, so that the adhesive can bond.
  • Make sure the surface is grease-free, dust and dirt.
  • Select the proper primer for your type of surface.

Other crucial preparation to do before you begin:

  • Step your square video footage.
  • Determine the number of tiles needed for the task.
  • Buy at least 10% more tiles in case of breakage throughout the installation. You might want to increase the amount to 20% or even 30% additional if you’re about to install delicate patterns. There are no guarantees when it comes to discovering the exact same batch, or even one that will carefully resemble what you purchased, even more down the line, so this is extremely advised.

Make certain you have the best type of adhesive.

According to the expert tradespersons from Fantastic Tilers, less knowledgeable DIY enthusiasts can utilize the ready-mix type of adhesive, but a professional tiler will constantly use the powdered service. It dries slower and hence permits you to better adjust and align the whole wall tiling.

Practical tip: When tiling cooking area splashbacks or damp spaces, or setting up bathroom tiles in general, adhesive should be water-resistant.

Make certain the wall is level or your tile setup may not achieve success.

Tiling an uneven wall has the prospective to result in catastrophe. An easy way to find irregularities is by positioning something long and flat (i.e. a routine plank) on the wall and sliding it throughout. This way, you can recognize any inflamed locations or bumps, should they exist.

An irregular wall can avoid adhesive from sticking– which might trigger your whole wall installation to collapse. According to expert tilers, anything between 3 and 6mm is still convenient– but anything beyond that is most likely to cause trouble.

If you choose to use a slightly thicker layer of adhesive to compensate, its grip might loosen– resulting in undesirable problems further down the line.

Different surfaces require various methods of preparation.

Some surfaces, such as a fresh drywall, require a minimum of a month to effectively dry. Other cases, such as when you’re tiling on wood, require a coat of polyurethane paint. Make certain you have the ideal option for your specific wall and, whenever in doubt, speak with a professional tiler.

Tile board backers are a fantastic way to manage unequal surfaces with minimal effort.

Although slightly more expensive, tile board backers can help you resolve the problem– not to mention that these items are resistant to moisture, and can successfully avoid mould (which is understood to grow on permeable products in warm, damp conditions). This benefit makes tile backer boards an useful option for restrooms, showers and locations surrounding the cooking area sink.

The one downside of tile backer boards is that using such products will make your fresh tile setup a bit more expensive.

Useful pointer: One important thing to make sure of here is that the boards are sturdy and well-mounted.

Can you set up brand-new tiles on top of old tiles?

Tiling over old tiles is possible– but it’s constantly much better to retile and remove.

The majority of tiles are too smooth for adhesive to effectively bond and, in these cases, additional treatment is needed. Depending upon the toolkit you have at hand, you might either try a sander (with medium to coarse sandpaper) or a grinding disc. You should, however, act with additional care so as not to damage the integrity of your old tiling.

Important: Constantly check for void behind old tiles. To do this, just knock on each piece with your hand and listen out for hollow noises. Areas with hollow area are simple to find, however beware– if you stop working to identify these and tile over them anyway, you risk of having your fresh tiles collapse in the fairly future.

tiling tools

What tools will I require for a DIY tile setup?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Regular utility knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a comparable tool).
  • Pencil.
  • Determining tape.
  • Drill.
  • Pins (to support the tile until the adhesive bonds and dries off).
  • Level.

Essential: Make sure your surface is always dust, dirt and moisture-free or there’s a possibility your adhesive might not correctly bond.

For the majority of types of masonry, ceramic and vinyl tiles will stick– but for wood surface areas, you’ll need to apply a coat of paint or prime.

How do I prep drywall for a fresh tile installation?

Fresh drywall needs approximately a month before it’s ready for tiling, however when the time comes, you will not need to tape the joints. All you’ll need to do is apply a skim coat and sand. Once done, tidy the surface area from dust, dry any indications of wetness and apply the adhesive.

Important: For locations rich with moisture, use water-resistant plasterboard.

How do I prep old drywall for a fresh tile setup?

It’s important to correctly examine whether the wall is steady and strong sufficient to hold the weight of fresh tiling. You must constantly ask for guidance from a skilled tiler if you’re unsure.

Fill in any fractures or holes from pins, nails or any other kind of wall fitting, use the guide, leave it to dry, sand one more time, and then apply the adhesive.

How do I prep the wall for tiles if the drywall is already painted or textured?

According to specialists, you ought to use PVA or make a DIY guide by including a bit more water to your adhesive.

After that, there are a couple of essential jobs to look after:.

  • Remove diminished paint.
  • Repair cracks and holes.
  • Sand if bumps are present.
  • Wipe the surface.
  • Make sure there are no indications of oil or grease.

Useful pointer: Deal with the wall with Trisodium Phosphate (TSP). It’s a powerful cleaner, stain remover and degreaser– but bear in mind that this should, obviously, be kept well away from kids.

How do I prep a plywood surface area for fresh tiling?

When it comes to walls, the truth is that plywood is appropriate for tiling your floors however not as useful. The product is made from compressed wood mixed with different oils, which implies that heat can impact it. , if exposed to dramatic regular frequent changes in temperature, tiles and modifications will likely crack.

How do I prep a wallpapered wall for tiling?

When it pertains to walls, tiles use much more longevity and usefulness than wallpaper, and the best alternative is to eliminate wallpaper wherever possible. The most effective and hassle-free way is by exposing the room to steam– but this approach does feature some dangers. The high temperature levels and moisture can possibly cause damage which is typically beyond basic repair if you’re treating drywall or engineered wood via steam.

You can simply wipe the surface with a damp and warm rag. This way, wetness won’t penetrate through to the substrate itself– however at the same time, the wallpaper will relax. Repeat the procedure a few times and use a scraper to peel everything with minimal effort.

As soon as done, all you’ll need to do prior to using primer or adhesive is to make certain the surface area is tidy and dry.

You can install new tiles on different surfaces, as long you prepare the wall appropriately. When appropriate preparation is done, you can easily use adhesive and stick your fresh tiles straight onto the wall.

Locations with hollow space are easy to identify, however beware– if you fail to spot these and tile over them anyhow, you run the threat of having your fresh tiles collapse in the fairly near future.

The truth is that plywood is suitable for tiling your floorings however not as practical when it comes to walls. When it comes to walls, tiles use far more durability and usefulness than wallpaper, and the finest choice is to eliminate wallpaper anywhere possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally answer in place in an array to lid roofs, floors, walls, edges, or additional objects such as tabletops. Alternatively, tile can sometimes take in hand to similar units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In choice sense, a tile is a construction tile or thesame object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of on fire clay.

Tiles are often used to form wall and floor coverings, and can range from simple square tiles to profound or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but extra materials are also commonly used, such as glass, cork, concrete and new composite materials, and stone. Tiling rock is typically marble, onyx, granite or slate. Thinner tiles can be used on walls than on floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button