There are a number of tiling companies in Dublin, but it’s constantly the most important to trust and pick. Your single click when searching for “regional tilers near me” online or calling somebody over the phone can assist you find a tiler in Dublin. Picking the right tiling system in Dublin can be a complicated job.

We are a qualified and licensed tiling company in Dublin. Having numerous years of experience and experienced commercial tilers in Dublin, we can mesmerize the appearance of your location with our stunning ceramic tiles.

How to Prepare a Wall for Tiling (Step-by-Step + Leading Tips).


Preparing your walls for a fresh wall tile installation is hassle-free and easy with our no-nonsense guide ready.

You can set up new tiles on different surface areas, as long you prepare the wall properly. Simply make sure the surface is level enough, and dust and dirt-free– and that there are no indications of residual wetness. When proper preparation is done, you can quickly use adhesive and stick your fresh tiles straight onto the wall.

How to get ready for tiling a wall:.

  • Remove old fittings, such as pins, screws, rivets and so on
  • Repair or eliminate unfit plaster.
  • If present), get rid of or pre-treat wallpaper (.
  • Fix any fractures or indications of damage.
  • Level the surface area.
  • Sand, so that the adhesive can bond.
  • Make sure the surface area is dust, grease-free and dirt.
  • Choose the proper guide for your kind of surface area.

Other crucial planning to do prior to you get started:

  • Step your square video footage.
  • Figure out the variety of tiles needed for the task.
  • Buy at least 10% more tiles in case of damage throughout the setup. If you’re about to install fragile patterns, you may want to increase the total up to 20% and even 30% extra. There are no guarantees when it comes to discovering the exact same batch, or perhaps one that will closely resemble what you bought, even more down the line, so this is highly suggested.

Ensure you have the right type of adhesive.

According to the expert tradesmen from Fantastic Tilers, less skilled Do It Yourself enthusiasts can utilize the ready-mix type of adhesive, but a professional tiler will constantly apply the powdered solution. It dries slower and hence enables you to much better change and align the entire wall tiling.

Practical tip: When tiling cooking area splashbacks or wet spaces, or installing restroom tiles in general, adhesive should be waterproof.

Make certain the wall is level or your tile setup might not achieve success.

Tiling an unequal wall has the possible to result in catastrophe. A simple method to find irregularities is by positioning something long and flat (i.e. a regular plank) on the wall and moving it throughout. In this manner, you can identify any inflamed locations or bumps, ought to they exist.

An irregular wall can prevent adhesive from sticking– which might cause your entire wall setup to collapse. According to professional tilers, anything in between 3 and 6mm is still workable– however anything beyond that is most likely to cause trouble.

Its grip might loosen up– leading to undesirable problems even more down the line if you decide to use a somewhat thicker layer of adhesive to compensate.

Various surface areas require various methods of preparation.

Some surfaces, such as a fresh drywall, need a minimum of a month to correctly dry. Other cases, such as when you’re tiling on wood, require a coat of polyurethane paint. Ensure you have the ideal service for your specific wall and, whenever in doubt, consult with an expert tiler.

Tile board backers are an excellent method to deal with irregular surfaces with minimal effort.

A little costlier, tile board backers can help you solve the problem– not to discuss that these products are resistant to wetness, and can effectively avoid mould (which is understood to grow on permeable products in warm, moist conditions). This advantage makes tile backer boards a practical solution for bathrooms, areas and showers surrounding the cooking area sink.

The one disadvantage of tile backer boards is that utilising such items will make your fresh tile setup a bit more costly.

Handy idea: One vital thing to make certain of here is that the boards are strong and well-mounted.

Can you set up brand-new tiles on top of old tiles?

Tiling over old tiles is possible– however it’s constantly better to retile and remove.

The majority of tiles are too smooth for adhesive to effectively bond and, in these cases, extra treatment is needed. Depending on the toolkit you have at hand, you could either attempt a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, show additional care so as not to harm the stability of your old tiling.

Important: Always check for void behind old tiles. To do this, just knock on each piece with your hand and listen out for hollow sounds. Locations with hollow area are easy to spot, but beware– if you stop working to find these and tile over them anyway, you risk of having your fresh tiles collapse in the relatively near future.

tiling tools

What tools will I need for a Do It Yourself tile setup?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Regular energy knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a comparable tool).
  • Pencil.
  • Measuring tape.
  • Drill.
  • Pins (to support the tile till the adhesive bonds and dries off).
  • Level.

Crucial: Ensure your surface area is always dust, dirt and moisture-free or there’s a chance your adhesive may not properly bond.

For the majority of types of masonry, ceramic and vinyl tiles will stick– but for wooden surface areas, you’ll need to apply a coat of paint or prime.

How do I prep drywall for a fresh tile installation?

Fresh drywall needs as much as a month before it’s ready for tiling, but when the time comes, you won’t have to tape the joints. All you’ll need to do is apply a skim coat and sand. Once done, clean the surface area from dust, dry any indications of moisture and use the adhesive.

Crucial: For areas rich with moisture, usage waterproof plasterboard.

How do I prep old drywall for a fresh tile setup?

It’s vital to properly assess whether the wall is strong and steady adequate to hold the weight of fresh tiling. If you’re uncertain, you need to constantly ask for recommendations from a knowledgeable tiler.

Fill in any fractures or holes from pins, nails or any other kind of wall fitting, apply the primer, leave it to dry, sand one more time, and after that use the adhesive.

How do I prep the wall for tiles if the drywall is already painted or textured?

According to specialists, you must use PVA or make a DIY primer by adding a bit more water to your adhesive.

After that, there are a few essential jobs to look after:.

  • Eliminate depreciated paint.
  • Repair fractures and holes.
  • If bumps are present, sand.
  • Clean the surface area.
  • Make sure there are no signs of oil or grease.

Practical tip: Treat the wall with Trisodium Phosphate (TSP). It’s an effective cleaner, stain eliminator and degreaser– however keep in mind that this should, of course, be kept well away from kids.

How do I prep a plywood surface area for fresh tiling?

The reality is that plywood is suitable for tiling your floorings but not as practical when it pertains to walls. The product is made of compressed wood mixed with various oils, which suggests that heat can affect it. , if exposed to dramatic regular frequent significant in significant, regular and modifications will temperature level crack.

How do I prep a wallpapered wall for tiling?

When it concerns walls, tiles use far more longevity and usefulness than wallpaper, and the best option is to get rid of wallpaper any place possible. The most efficient and hassle-free way is by exposing the space to steam– but this approach does come with some threats. The high temperatures and moisture can possibly trigger damage which is frequently beyond easy repair if you’re treating drywall or crafted wood by means of steam.

You can just wipe the surface area with a warm and wet rag. This way, moisture won’t penetrate through to the substrate itself– however at the same time, the wallpaper will chill out. Repeat the treatment a couple of times and utilize a scraper to peel whatever with minimal effort.

When done, all you’ll need to do prior to using primer or adhesive is to ensure the surface is dry and tidy.

You can install new tiles on different surface areas, as long you prepare the wall appropriately. When appropriate preparation is done, you can quickly use adhesive and stick your fresh tiles straight onto the wall.

Locations with hollow area are simple to find, but beware– if you stop working to identify these and tile over them anyway, you run the danger of having your fresh tiles collapse in the reasonably near future.

The reality is that plywood is ideal for tiling your floorings however not as useful when it comes to walls. When it comes to walls, tiles provide far more longevity and practicality than wallpaper, and the best alternative is to eliminate wallpaper wherever possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally conclusive in place in an array to lid roofs, floors, walls, edges, or further objects such as tabletops. Alternatively, tile can sometimes dispatch to thesame units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In choice sense, a tile is a construction tile or thesame object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of fired up clay.

Tiles are often used to form wall and floor coverings, and can range from easy square tiles to obscure or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but other materials are with commonly used, such as glass, cork, concrete and extra composite materials, and stone. Tiling rock is typically marble, onyx, granite or slate. Thinner tiles can be used upon walls than upon floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button