WHY SELECT US

There are a number of tiling companies in Dublin, but it’s always the most essential to trust and pick. Your single click when searching for “local tilers near me” online or calling somebody over the phone can assist you discover a tiler in Dublin. Choosing the ideal tiling system in Dublin can be a daunting job. The issue is who to call the Dublin tiling facilities. Don’t think all of you blindly. Modern Tiling may be the perfect choice for your tiling needs.

We are a competent and certified tiling firm in Dublin. Having numerous years of experience and skilled business tilers in Dublin, we can enthrall the look of your location with our gorgeous ceramic tiles.

How to Prepare a Wall for Tiling (Step-by-Step + Top Tips).

tilers

Preparing your walls for a fresh wall tile installation is problem-free and basic with our no-nonsense guide ready.

You can install brand-new tiles on numerous surfaces, as long you prepare the wall appropriately. Just ensure the surface is level enough, and dust and dirt-free– and that there are no indications of recurring moisture. When correct preparation is done, you can quickly apply adhesive and stick your fresh tiles straight onto the wall.

How to prepare for tiling a wall:.

  • Eliminate old fittings, such as pins, screws, rivets etc
  • Repair or eliminate unfit plaster.
  • Get rid of or pre-treat wallpaper (if present).
  • Repair any cracks or indications of damage.
  • Level the surface area.
  • Sand, so that the adhesive can bond.
  • Make certain the surface is dirt, dust and grease-free.
  • Select the proper guide for your kind of surface area.

Other crucial planning to do before you begin:

  • Procedure your square video footage.
  • Determine the variety of tiles required for the task.
  • Purchase least 10% more tiles in case of breakage during the installation. You might wish to increase the amount to 20% or even 30% extra if you’re about to install fragile patterns. There are no assurances when it concerns finding the exact same batch, and even one that will closely resemble what you purchased, further down the line, so this is extremely advised.

Make sure you have the ideal kind of adhesive.

According to the expert tradesmen from Great Tilers, less experienced DIY enthusiasts can use the ready-mix kind of adhesive, however an expert tiler will always apply the powdered solution. It dries slower and thus enables you to better adjust and align the whole wall tiling.

Useful tip: When tiling cooking area splashbacks or damp rooms, or setting up bathroom tiles in general, adhesive should be water-resistant.

Make sure the wall is level or your tile setup may not achieve success.

Tiling an unequal wall has the prospective to lead to disaster. A simple way to find abnormalities is by putting something long and flat (i.e. a regular slab) on the wall and sliding it across. This way, you can recognize any swollen locations or bumps, need to they exist.

An unequal wall can avoid adhesive from sticking– which might trigger your entire wall installation to collapse. According to expert tilers, anything between 3 and 6mm is still practical– however anything beyond that is likely to cause trouble.

Its grip might loosen up– leading to undesirable issues further down the line if you choose to apply a somewhat thicker layer of adhesive to compensate.

Different surfaces require various means of preparation.

Some surfaces, such as a fresh drywall, require a minimum of a month to appropriately dry. Other cases, such as when you’re tiling on wood, require a coat of polyurethane paint. Make sure you have the ideal solution for your particular wall and, whenever in doubt, talk to an expert tiler.

Tile board backers are a fantastic way to handle irregular surface areas with very little effort.

A little pricier, tile board backers can assist you solve the problem– not to discuss that these products are resistant to wetness, and can effectively avoid mould (which is known to grow on porous materials in warm, moist conditions). This advantage makes tile backer boards an useful solution for restrooms, showers and locations surrounding the kitchen area sink.

The one disadvantage of tile backer boards is that making use of such items will make your fresh tile setup a bit more pricey.

Useful pointer: One crucial thing to make certain of here is that the boards are well-mounted and strong.

Can you set up new tiles on top of old tiles?

Tiling over old tiles is possible– but it’s always much better to remove and retile.

A lot of tiles are too smooth for adhesive to correctly bond and, in these cases, additional treatment is required. Depending on the toolkit you have at hand, you could either attempt a sander (with medium to coarse sandpaper) or a grinding disc. You should, however, act with extra care so as not to harm the stability of your old tiling.

Essential: Constantly examine for empty space behind old tiles. To do this, merely knock on each piece with your hand and listen out for hollow sounds. Locations with hollow space are easy to identify, however beware– if you fail to spot these and tile over them anyhow, you run the risk of having your fresh tiles collapse in the reasonably near future.

tiling tools

What tools will I require for a Do It Yourself tile installation?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Regular utility knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a comparable tool).
  • Pencil.
  • Measuring tape.
  • Drill.
  • Pins (to support the tile up until the adhesive bonds and dries off).
  • Level.

Crucial: Ensure your surface area is always dust, dirt and moisture-free or there’s a chance your adhesive may not appropriately bond.

For many types of masonry, ceramic and vinyl tiles will stick– but for wooden surfaces, you’ll need to apply a coat of paint or prime.

How do I prep drywall for a fresh tile installation?

Fresh drywall needs as much as a month before it’s ready for tiling, however when the time comes, you won’t need to tape the joints. All you’ll require to do is use a skim coat and sand. Once done, clean the surface area from dust, dry any indications of wetness and apply the adhesive.

Crucial: For areas abundant with moisture, usage water-resistant plasterboard.

How do I prep old drywall for a fresh tile installation?

It’s important to appropriately assess whether the wall is steady and strong adequate to hold the weight of fresh tiling. You must always ask for recommendations from an experienced tiler if you’re unsure.

Fill out any cracks or holes from pins, nails or any other type of wall fitting, apply the primer, leave it to dry, sand one more time, and after that use the adhesive.

How do I prep the wall for tiles if the drywall is already painted or textured?

According to professionals, you need to use PVA or make a DIY guide by adding a bit more water to your adhesive.

After that, there are a couple of essential tasks to take care of:.

  • Eliminate diminished paint.
  • Repair fractures and holes.
  • If bumps are present, sand.
  • Clean the surface.
  • Ensure there are no indications of oil or grease.

Handy idea: Treat the wall with Trisodium Phosphate (TSP). It’s a powerful cleaner, stain cleaner and degreaser– however bear in mind that this should, of course, be kept well away from kids.

How do I prep a plywood surface area for fresh tiling?

The truth is that plywood appropriates for tiling your floors but not as useful when it comes to walls. The material is made from compressed wood blended with different oils, which means that heat can impact it. , if exposed to frequent regular dramatic changes in significant, tiles and modifications will likely crack.

How do I prep a wallpapered wall for tiling?

When it pertains to walls, tiles use far more longevity and functionality than wallpaper, and the very best option is to get rid of wallpaper anywhere possible. The most hassle-free and efficient method is by exposing the space to steam– however this technique does feature some dangers. If you’re dealing with drywall or engineered wood by means of steam, the heats and moisture can possibly cause damage which is often beyond simple repair.

You can merely wipe the surface area with a wet and warm rag. In this manner, moisture won’t penetrate through to the substrate itself– however at the same time, the wallpaper will loosen up. Repeat the treatment a couple of times and utilize a scraper to peel whatever with very little effort.

Once done, all you’ll need to do prior to applying guide or adhesive is to make sure the surface is dry and clean.

You can set up new tiles on various surfaces, as long you prepare the wall properly. When correct preparation is done, you can quickly apply adhesive and stick your fresh tiles straight onto the wall.

Areas with hollow area are easy to spot, however beware– if you fail to identify these and tile over them anyway, you run the risk of having your fresh tiles collapse in the fairly near future.

The fact is that plywood is appropriate for tiling your floors but not as practical when it comes to walls. When it comes to walls, tiles provide far more durability and practicality than wallpaper, and the finest alternative is to remove wallpaper anywhere possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally unqualified in place in an array to lid roofs, floors, walls, edges, or supplementary objects such as tabletops. Alternatively, tile can sometimes forward to thesame units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In unconventional sense, a tile is a construction tile or similar object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of excited clay.

Tiles are often used to form wall and floor coverings, and can range from simple square tiles to puzzling or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but additional materials are next commonly used, such as glass, cork, concrete and further composite materials, and stone. Tiling stone is typically marble, onyx, granite or slate. Thinner tiles can be used upon walls than upon floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button