WHY PICK Modern Tiling

There are several tiling companies in Dublin, however it’s constantly the most crucial to trust and choose. Your single click when searching for “regional tilers near me” online or calling somebody over the phone can help you find a tiler in Dublin. Picking the best tiling system in Dublin can be a challenging job.

We are a qualified and licensed tiling company in Dublin. Having several years of experience and knowledgeable business tilers in Dublin, we can mesmerize the appearance of your location with our beautiful ceramic tiles.

How to Prepare a Wall for Tiling (Leading + step-by-step Tips).


Preparing your walls for a fresh wall tile setup is simple and hassle-free with our no-nonsense guide at the ready.

You can set up new tiles on various surfaces, as long you prepare the wall appropriately. Simply make certain the surface is level enough, and dust and dirt-free– which there are no signs of residual wetness. When proper preparation is done, you can easily apply adhesive and stick your fresh tiles straight onto the wall.

How to prepare for tiling a wall:.

  • Remove old fittings, such as pins, screws, rivets etc
  • Repair work or eliminate unsuited plaster.
  • Eliminate or pre-treat wallpaper (if present).
  • Fix any fractures or signs of damage.
  • Level the surface.
  • Sand, so that the adhesive can bond.
  • Ensure the surface area is grease-free, dust and dirt.
  • Select the proper guide for your type of surface.

Other crucial preparation to do prior to you begin:

  • Procedure your square footage.
  • Find out the variety of tiles required for the task.
  • Purchase least 10% more tiles in case of breakage during the setup. If you’re about to install fragile patterns, you may wish to increase the amount to 20% or even 30% additional. There are no guarantees when it concerns finding the exact same batch, and even one that will closely resemble what you bought, further down the line, so this is extremely recommended.

Make sure you have the best kind of adhesive.

According to the professional tradesmen from Great Tilers, less experienced Do It Yourself enthusiasts can utilize the ready-mix kind of adhesive, however an expert tiler will always use the powdered service. It dries slower and thus permits you to better change and align the entire wall tiling.

Helpful idea: When tiling kitchen splashbacks or wet rooms, or setting up bathroom tiles in general, adhesive must be water-resistant.

Make sure the wall is level or your tile setup might not be successful.

Tiling an unequal wall has the prospective to lead to disaster. A simple method to spot irregularities is by positioning something long and flat (i.e. a regular plank) on the wall and moving it across. This way, you can determine any swollen locations or bumps, need to they exist.

An uneven wall can avoid adhesive from sticking– which might cause your whole wall setup to collapse. According to professional tilers, anything between 3 and 6mm is still convenient– but anything beyond that is most likely to cause trouble.

Its grip may loosen– leading to undesirable concerns further down the line if you choose to apply a somewhat thicker layer of adhesive to compensate.

Different surfaces need different ways of preparation.

Some surfaces, such as a fresh drywall, require at least a month to appropriately dry. Other cases, such as when you’re tiling on wood, need a coat of polyurethane paint. Make certain you have the right service for your particular wall and, whenever in doubt, consult with a professional tiler.

Tile board backers are an excellent method to handle unequal surfaces with very little effort.

Somewhat more expensive, tile board backers can assist you fix the problem– not to mention that these items are resistant to moisture, and can successfully prevent mould (which is known to grow on porous materials in warm, wet conditions). This benefit makes tile backer boards a practical option for locations, showers and restrooms surrounding the kitchen sink.

The one disadvantage of tile backer boards is that making use of such items will make your fresh tile installation a little more costly.

Valuable idea: One essential thing to make sure of here is that the boards are strong and well-mounted.

Can you set up new tiles on top of old tiles?

Tiling over old tiles is possible– but it’s constantly much better to eliminate and retile.

A lot of tiles are too smooth for adhesive to appropriately bond and, in these cases, additional treatment is required. Depending upon the toolkit you have at hand, you could either attempt a sander (with medium to coarse sandpaper) or a grinding disc. You should, however, show extra caution so as not to harm the integrity of your old tiling.

Crucial: Always examine for empty space behind old tiles. To do this, merely knock on each piece with your hand and listen out for hollow sounds. Locations with hollow area are simple to identify, however beware– if you fail to identify these and tile over them anyhow, you run the risk of having your fresh tiles collapse in the fairly future.

tiling tools

What tools will I need for a Do It Yourself tile setup?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Routine energy knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a similar tool).
  • Pencil.
  • Measuring tape.
  • Drill.
  • Pins (to support the tile until the adhesive bonds and dries off).
  • Level.

Essential: Make certain your surface area is always dust, dirt and moisture-free or there’s an opportunity your adhesive might not effectively bond.

For many kinds of masonry, ceramic and vinyl tiles will stick– but for wooden surfaces, you’ll need to use a coat of paint or prime.

How do I prep drywall for a fresh tile setup?

Fresh drywall requires up to a month before it’s ready for tiling, but when the time comes, you won’t need to tape the joints. All you’ll need to do is apply a skim coat and sand. Once done, clean the surface from dust, dry any indications of wetness and apply the adhesive.

Essential: For areas rich with wetness, usage water-resistant plasterboard.

How do I prep old drywall for a fresh tile installation?

It’s crucial to properly examine whether the wall is strong and steady enough to hold the weight of fresh tiling. You ought to constantly ask for advice from a skilled tiler if you’re uncertain.

Fill out any cracks or holes from pins, nails or any other kind of wall fitting, apply the primer, leave it to dry, sand one more time, and after that apply the adhesive.

How do I prep the wall for tiles if the drywall is currently painted or textured?

According to professionals, you need to apply PVA or make a DIY primer by adding a bit more water to your adhesive.

After that, there are a few crucial tasks to look after:.

  • Remove depreciated paint.
  • Repair cracks and holes.
  • If bumps are present, sand.
  • Wipe the surface area.
  • Make sure there are no signs of oil or grease.

Practical suggestion: Treat the wall with Trisodium Phosphate (TSP). It’s a powerful cleaning agent, stain cleaner and degreaser– but remember that this should, naturally, be kept well away from children.

How do I prep a plywood surface area for fresh tiling?

The fact is that plywood is suitable for tiling your floors but not as useful when it concerns walls. The material is made of compressed wood blended with various oils, which indicates that heat can impact it. If exposed to significant and frequent modifications in temperature, tiles and grout will likely split.

How do I prep a wallpapered wall for tiling?

When it pertains to walls, tiles provide much more longevity and usefulness than wallpaper, and the best alternative is to get rid of wallpaper anywhere possible. The most efficient and hassle-free way is by exposing the room to steam– but this approach does feature some dangers. If you’re treating drywall or crafted wood via steam, the heats and wetness can possibly cause damage which is typically beyond basic repair work.

Additionally, you can merely wipe the surface area with a warm and damp rag. This way, wetness won’t penetrate through to the substrate itself– however at the same time, the wallpaper will chill out. Repeat the treatment a couple of times and utilize a scraper to peel whatever with very little effort.

As soon as done, all you’ll require to do prior to applying guide or adhesive is to make sure the surface is dry and tidy.

You can install new tiles on different surfaces, as long you prepare the wall appropriately. When appropriate preparation is done, you can easily apply adhesive and stick your fresh tiles straight onto the wall.

Locations with hollow space are simple to identify, but beware– if you stop working to spot these and tile over them anyhow, you run the danger of having your fresh tiles collapse in the fairly near future.

The truth is that plywood is suitable for tiling your floorings but not as practical when it comes to walls. When it comes to walls, tiles use far more longevity and practicality than wallpaper, and the finest alternative is to eliminate wallpaper anywhere possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally solution in place in an array to cover roofs, floors, walls, edges, or extra objects such as tabletops. Alternatively, tile can sometimes deliver to similar units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In different sense, a tile is a construction tile or similar object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of excited clay.

Tiles are often used to form wall and floor coverings, and can range from easy square tiles to puzzling or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but other materials are as a consequence commonly used, such as glass, cork, concrete and further composite materials, and stone. Tiling rock is typically marble, onyx, granite or slate. Thinner tiles can be used upon walls than on floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button