Established in 2000, we’re among the leading tilers in Dublin. Consistency and quality are at the core of everything we do, allowing us to end up being among the most trustworthy tiling companies in Dublin.

With years of tiling experience, our vibrant team have satisfied virtually every tiling request imaginable, developing long lasting relationships with a host of providers & clients and crafting a service unlike any tiling business in Dublin. From minor works to massive tasks, we position consumer complete satisfaction and efficiency above all else, guaranteeing we provide on-time, in budget plan and to a high standard.

How to tile a wall

 

Create a sensational wall with appealing, useful and long lasting wall tiles

tiler dublin
Tiling is a skilled job but we’re here to help you get the best surface to your wall tiles. Whether you’re tiling an entire restroom, a shower cubicle, a splashback in a kitchen or a little area around a fireplace, our advice will help you accomplish a terrific result.
Prior to you begin, it is necessary to prepare your tiling. Computing the number of tiles & adhesive you require, planning and preparing the wall out the position of the tiles are all important factors. Our guide to planning your wall tiles covers all you require to understand before tiling.
This guide will stroll you through how to lay the tiles. In our example we’re tiling an entire wall with square tiles in a direct tiling design. We’ll describe how to:

  • Repair entire tiles to a wall
  • Cut tiles for barriers and corners and apply corner tile trim
  • Grout and finish wall tiles
  • Seal around the edges of tiling

tiling

Tools & Materials

 

Products

 

  • Wall tiles
  • Filler – if you have any holes in the wall that need filling. If the hole in the wall is larger than the size of your fist, we suggest getting a professional to make the repair.
  • Tile adhesive – we suggest ready-mixed tile adhesive to save time
  • Tile spacers
  • Hygienic sealant – we recommend anti-mould sealant for a finish that lasts
  • Grout – we advise ready-mixed grout
  • Multi-purpose fabrics
  • Tile trim – as required.

 

Tools

 

  • Rule
  • Tape measure
  • Chinagraph pencil or felt-tip pen – if required, to mark tiles for cutting
  • Trowel
  • Notched trowel (likewise referred to as a notched spreader).
  • Tile cutter.
  • Tile file – if needed.
  • Hacksaw – if needed, to cut the tile trim.
  • Grout spreader (likewise known as a grout float).
  • Grout finisher (also called a grout shaper).
  • Claw hammer.
  • Sponge.
  • Pail.
  • Spirit level.
  • Cartridge gun – if needed. Some sealant comes as a trigger weapon and does not need a cartridge weapon. Examine the item directions for the sealant.
  • Sealant smoother.

 

Security set.

 

  • Security gloves.
  • Dust mask.

 

 

Safety first.

 

  • When cutting tiles, use safety goggles and a dust mask to safeguard you from flying fragments and sharp edges.

 

How to tile an entire wall.

As soon as you’ve prepared the tiles, prepared the wall and repaired your lumber battens, lay whole tiles first by following these actions.

wall tiling step 1

 

Action 1.

Scoop up some tile adhesive with the trowel and press it onto the wall, beginning in the corner formed by the timber battens. Spread it with the notched trowel, working away from the corner with horizontal strokes. Hold the edge of the notched trowel at an angle of about 45 °. The ridges in the adhesive will make sure there’s an equivalent amount behind each tile, making it easier to get them all level. Attempt not to deal with more than one square metre at a time, as the adhesive might start solidifying prior to you have actually put all the tiles in place.
Choose an ideal tile adhesive for your tiles: for ceramic tiles utilize a ready-mixed tile adhesive or powder adhesive and a powder tile adhesive for porcelain tiles.
Use adhesive to the wall and also on the back of the tiles if your tiles are larger than 20 x 20.

 

Action 2.

Position your very first tile into the corner, pressing its edges versus the corners and the entire tile securely against the wall. Then include a tile above it and one next to the initial tile pressing them strongly into the adhesive using a twisting action.
If you let it dry it’ll be very tough to take off, wipe off any adhesive from the tiles with a damp sponge as you go–.
Leading tip – applying mosaic tiles.
When using mosaic tiles to the wall, hold a piece of board over the tiles while the adhesive is wet and tap the board gently with a rubber mallet. This will provide the tiles a flat, even finish.
Some mosaics are set at different heights, in which case you must use your hand to guarantee they’re all individually bedded into the adhesive.

Step 3.

Put tile spacers into the corners between the tiles and change the tile positions as and when needed. Push them in securely and position them flush against the wall so you can grout over them.

Step 4.

Add another tile above the last one you used, and another next to it. Continue applying the whole tiles in this way up until you have actually tiled the location covered with tile adhesive.
Apply another square metre of adhesive and tiles up until you have fixed all the whole tiles.
At the edges of the wall, put one leg of the spacer in between the tiles so the rest is standing out– we’ll remove this later prior to grouting.

Step 5.

Leave to dry for the length of time directed on the tile adhesive guidelines.

Action 6.

Remove the vertical wood batten by prising out it’s nails with the claw of a hammer.

Action 7.

Fix entire tiles to the other section of the wall, beginning with the corner beside the tiles you’ve already repaired.

Step 8.

Once all the whole tiles have been repaired and are dry, remove the horizontal wood batten.
Now you’ve repaired all of the entire tiles, you’re ready to fill the edges and corners of the wall. Head to ‘How to tile corners’ to learn how to do this.

How to tile corners.

In this section, we’ll talk you through tiling corners. There are two kinds of corner– internal and external. These could be corners created by walls or corners created by obstructions:.

Internal corner.

The corner join between two walls, for instance the corner of a room, or the corner developed by a door frame.

External corner.

Outward-facing corner that protrudes into the space, for instance the corner of a function wall or the edge of a window recess.
There’s a different method for tiling depending upon the type of corner, and we’ll discuss both approaches in this section.
Often you might find that you can fit whole tiles across the wall without needing to cut a tile for the corner. If no cuts are needed, jump to the area ‘How to complete and grout wall tiles’.
In most cases, you’ll require to cut a tile to fit into the corner.

How to measure and mark tiles for cutting.

There are two methods to mark a tile and determine for cutting:.

Choice 1.

Hold the tile you’ll be cutting over the last whole tile in the row. Fit another versus the wall and mark where it overlaps the one listed below with a tile scribe, chinagraph pencil or felt-tip pen.

Option 2.

Take separate measurements at the top and bottom of the space you’re going to fill utilizing a measuring tape. Mark the measurements at the top and bottom of the tile. Line up the square with the two marks and draw a line between them with a pencil or felt-tip pen, giving you a vertical line to cut along.
With the marks made, it’s time to cut the tiles. Head to our How to cut tiles article for recommendations on this.

Action 1.

After you have actually cut the tile, check to see that it fits. If you require to make any small changes utilize a tile file.
If you’re also going to tile the nearby wall, you don’t need to be completely precise as the edges will be concealed by the tiles on the other wall.

How to tile internal corners.

 

Step 1.

After you have actually cut the tile, check to see that it fits. , if you require to make any small modifications use a tile file.. You do not have to be completely accurate as the edges will be concealed by the tiles on the other wall if you’re likewise going to tile the nearby wall.

Action 2.

Utilize the narrow end of a notched spreader to put adhesive on the back of the cut tile. Then press it into location so it’s level with the surrounding tile. If you require to, Usage spacers.

Action 3.

If you’re tiling more than one wall, proceed to the next wall. If not, you’re ready to begin grouting and completing the tiles. For suggestions on this, jump to our area ‘How to grout and finish wall tiles’.

How to tile external corners.

Usage tile trims to get a cool finish on external corners. It likewise helps to safeguard the edges of the tiles from knocks, which might chip them.

Step 1.

End up tiling your very first wall.

Action 2.

Utilize a tape measure to measure the length of the edge that you’ll be repairing the tile trim to.

Action 3.

Step the tile trim to the exact same size and make a mark on it to show where to cut. Use a hacksaw to cut the tile trim to the length you require.

Step 4.

Add a narrow strip of tile adhesive to the untiled wall utilizing the notched trowel and press the trim into it.

Step 5.

Line the trim up with the tiles of your very first wall. Put two spacers in between the trim and each tile (one near the top of the tile and one near the bottom) to make sure there’s a space for grout.

Action 6.

Put more tile adhesive on the untitled wall with the notched trowel. Include the adhesive vertically from top to bottom to avoid knocking the tile trim out of place with the teeth of the notched trowel.

Action 7.

Start tiling your 2nd wall, working away from the corner trim. As you set the tiles in place, remember to allow a narrow grouting gap in between them and the trim. Insert spacers and adjust the tiles as you go, so the gap stays the very same and the trim remain in place.

How to grout and finish wall tiles.

Once the tiles are repaired in place and the adhesive has actually dried, it’s time to use the grout.

Step 1.

Get rid of the protruding tile spacers at the edges of the wall and at corners.

Action 2.

Beginning in the bottom left corner, press a small amount of grout onto the face of the tiles with a trowel.
Utilize a grout spreader, likewise called a grout float, to spread it, making long, diagonal strokes and working it into the joints in between tiles. Continue till you’ve grouted all the joints. The grout will quickly begin to harden, so do this as quick as you can.
If you’re grouting a large location, split it into sections and grout an area at a time. This is to prevent the grout solidifying excessive whilst you finish grouting the whole location.

Step 3.

Instantly after you finish applying the grout, review the tiles with a wet sponge (however not too damp as this may cause discolouration) to remove any excess. Make sure not to drag any grout from the joints.

Step 4.

Leave the grout to dry. As it does, you’ll observe a grainy film appear on the tiles from all the sponging. Wipe this off with a soft, clean fabric.

How to seal around the edge of tiling.

Sealing around the edge of tiling is important to stop water supporting the tiles, especially around worktops, basins and kitchen sinks. Water behind tiles can trigger damage to the wall, fittings and components. We’ll talk you through sealing the edge of tiling with hygienic sealant.

Step 1.

Attach the nozzle to the sealant and cut off the pointer, as directed by the item instructions. Put the sealant into the cartridge gun if required.

Step 2.

Run a constant bead of sealant, working from one end of the tiled area to the other, from left to. Try to keep a constant pressure on the trigger of the gun and a consistent speed when you’re doing this.

Action 3.

Smooth any irregularities in the shape of the bead with a sealant smoother (or a damp finger), however take care not to pull the sealant from the surface.

Step 4.

 

Leave the sealant to dry.

Calculating the number of tiles & adhesive you require, preparing the wall and planning out the position of the tiles are all vital elements. Our guide to preparing your wall tiles covers all you require to know before tiling.

In our example we’re tiling an entire wall with square tiles in a linear tiling design. If you’re likewise going to tile the nearby wall, you don’t have to be absolutely precise as the edges will be concealed by the tiles on the other wall.
Start tiling your second wall, working away from the corner trim.

Modern Tiling Videos

 

 

Learn More About Tiling

 

 

Related Articles

 

 

Modern Tiling Services

 

 

Around the Web

 

Call Now Button