WHY SELECT US
There are several tiling companies in Dublin, however it’s constantly the most important to trust and choose. Your single click when looking for “regional tilers near me” online or calling somebody over the phone can assist you discover a tiler in Dublin. Yet picking the right tiling system in Dublin can be a daunting job. The problem is who to contact the Dublin tiling centres. Don’t think all of you blindly. Modern Tiling may be the best choice for your tiling requirements.
We are a certified and certified tiling agency in Dublin. Having several years of experience and experienced commercial tilers in Dublin, we can enthral the look of your place with our lovely ceramic tiles.
How to Prepare a Wall for Tiling (Step-by-Step + Top Tips)
Preparing your walls for a fresh wall tile installation is hassle-free and simple with our no-nonsense guide at the ready.
You can install new tiles on various surface areas, as long as you prepare the wall appropriately. Simply ensure the surface area is level enough, and dust and dirt-free– where there are no signs of residual moisture. When proper preparation is done, you can quickly use adhesive and stick your fresh tiles straight onto the wall.
How to prepare for tiling a wall:.
- Eliminate old fittings, such as pins, screws, rivets and so on
- Repair or eliminate unsuited plaster.
- If present, get rid of or pre-treat wallpaper.
- Repair any cracks or indications of damage.
- Level the surface area.
- Sand, so that the adhesive can bond.
- Ensure the surface is dirt, grease-free and dust.
- Choose the proper guide for your type of surface.
Other important preparation to do before you start:
- Step your square footage.
- Determine the number of tiles required for the task.
- Purchase at least 10% more tiles in case of damage throughout the setup. You may want to increase the quantity to 20% or even 30% extra if you’re about to install fragile patterns. There are no guarantees when it pertains to finding the exact same batch, and even one that will closely resemble what you bought, even more down the line, so this is highly suggested.
Make sure you have the best type of adhesive.
According to the expert tradesmen from Wonderful Tilers, less skilled DIY enthusiasts can utilise the ready-mix kind of adhesive, however an expert tiler will constantly apply the powdered solution. It dries slower and therefore enables you to much better adjust and line up the entire wall tiling.
Handy suggestion: When tiling kitchen splashbacks or damp spaces, or setting up bathroom tiles in general, adhesive should be waterproof.
Make certain the wall is level or your tile installation may not achieve success.
Tiling an uneven wall has the potential to result in disaster. An easy method to spot irregularities is by putting something long and flat (i.e. a routine plank) on the wall and sliding it throughout. By doing this, you can determine any inflamed areas or bumps, ought to they exist.
An unequal wall can prevent adhesive from sticking– which might cause your entire wall setup to collapse. According to professional tilers, anything in between 3 and 6mm is still convenient– but anything beyond that is likely to cause trouble.
Its grip may loosen– leading to unwanted concerns further down the line if you decide to apply a slightly thicker layer of adhesive to compensate.
Various surface areas need different methods of preparation.
Some surface areas, such as a fresh drywall, require at least a month to properly dry. Other cases, such as when you’re tiling on wood, require a coat of polyurethane paint. Make sure you have the best option for your particular wall and, whenever in doubt, talk to an expert tiler.
Tile board backers are a great method to handle irregular surfaces with very little effort.
Somewhat more expensive, tile board backers can assist you solve the problem– not to point out that these items are resistant to moisture, and can effectively prevent mould (which is understood to grow on porous products in warm, moist conditions). This benefit makes tile backer boards an useful service for areas, restrooms and showers surrounding the kitchen sink.
The one downside of tile backer boards is that utilising such items will make your fresh tile setup a bit more costly.
Helpful pointer: One important thing to make certain of here is that the boards are strong and well-mounted.
Can you set up brand-new tiles on top of old tiles?
Tiling over old tiles is possible– but it’s always better to get rid of and retile.
Most tiles are too smooth for adhesive to appropriately bond and, in these cases, additional treatment is needed. Depending upon the toolkit you have at hand, you could either attempt a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, act with extra caution so as not to harm the stability of your old tiling.
Important: Always check for voids behind old tiles. To do this, merely knock on each piece with your hand and listen out for hollow sounds. Locations with hollow space are simple to identify, however beware– if you stop working to identify these and tile over them anyway, you risk having your fresh tiles collapse in the fairly future.
What tools will I need for a Do It Yourself tile setup?
- Paintbrush.
- Paint roller.
- Liquid waterproofing membranes (or plastic sheets).
- Regular energy knife.
- Stapler.
- Mask and protective glasses (to keep you safe from heavy particles).
- Gloves.
- Straight edge (or a similar tool).
- Pencil.
- Measuring tape.
- Drill.
- Pins (to support the tile up until the adhesive bonds and dries off).
- Level.
Important: Ensure your surface is always dust, dirt and moisture-free or there’s a chance your adhesive may not correctly bond.
For most types of masonry, ceramic and vinyl tiles will stick– but for wood surface areas, you’ll need to use a coat of paint or prime.
How do I prep drywall for a fresh tile installation?
Fresh drywall needs approximately a month before it’s ready for tiling, but when the time comes, you will not have to tape the joints. All you’ll require to do is apply a skim coat and sand. When done, tidy the surface from dust, dry any indications of moisture and apply the adhesive.
Essential: For areas rich with wetness, use waterproof plasterboard.
How do I prep old drywall for a fresh tile installation?
It’s crucial to effectively examine whether the wall is strong and steady sufficient to hold the weight of fresh tiling. If you’re not sure, you need to always request suggestions from a knowledgeable tiler.
Complete any cracks or holes from pins, nails or any other type of wall fitting, apply the guide, leave it to dry, sand one more time, and after that apply the adhesive.
How do I prep the wall for tiles if the drywall is currently painted or textured?
According to specialists, you ought to apply PVA or make a DIY guide by adding a bit more water to your adhesive.
After that, there are a few crucial jobs to take care of:.
- Get rid of diminished paint.
- Repair cracks and holes.
- If bumps are present, sand.
- Wipe the surface.
- Make sure there are no indications of oil or grease.
Useful idea: Deal with the wall with Trisodium Phosphate (TSP). It’s an effective cleaner, stain cleaner and degreaser– however bear in mind that this should, of course, be kept well away from children.
How do I prep a plywood surface for fresh tiling?
The truth is that plywood is suitable for tiling your floorings, however not as useful when it comes to walls. The material is made from compressed wood mixed with different oils, which means that heat can affect it. , if exposed to frequent and dramatic remarkable in remarkable, regular and modifications will likely crack.
How do I prep a wallpapered wall for tiling?
When it concerns walls, tiles provide far more durability and usefulness than wallpaper, and the very best option is to get rid of wallpaper wherever possible. The most effective and hassle-free way is by exposing the space to steam– however this approach does include some risks. If you’re dealing with drywall or engineered wood via steam, the high temperatures and moisture can potentially cause damage which is often beyond easy repair.
You can merely wipe the surface area with a warm and wet rag. This way, wetness won’t permeate through to the substrate itself– however at the same time, the wallpaper will loosen up. Repeat the procedure a few times and utilise a scraper to peel everything with minimal effort.
As soon as done, all you’ll need to do prior to using guide or adhesive is to ensure the surface is dry and clean.
You can set up new tiles on various surface areas, as long as you prepare the wall properly. When proper preparation is done, you can easily use adhesive and stick your fresh tiles straight onto the wall.
Areas with hollow space are easy to identify, however beware– if you fail to find these and tile over them anyway, you run the threat of having your fresh tiles collapse in the reasonably near future.
The fact is that plywood is appropriate for tiling your floors however not as practical when it comes to walls. When it comes to walls, tiles use far more durability and usefulness than wallpaper, and the best alternative is to get rid of wallpaper any place possible.