WHY CHOOSE ModernTiling.ie

There are several tiling companies in Dublin, however it’s constantly the most essential to trust and select. Your single click when searching for “local tilers near me” online or calling someone over the phone can help you find a tiler in Dublin. Selecting the ideal tiling system in Dublin can be a daunting task. The issue is who to get in touch with the Dublin tiling centers. Do not believe all of you blindly. Modern Tiling may be the best choice for your tiling needs.

We are a certified and certified tiling agency in Dublin. Having several years of experience and experienced industrial tilers in Dublin, we can enthrall the appearance of your location with our beautiful ceramic tiles.

How to Prepare a Wall for Tiling (Top + step-by-step Tips).

tilers

Preparing your walls for a fresh wall tile setup is basic and problem-free with our no-nonsense guide at the ready.

You can set up brand-new tiles on different surfaces, as long you prepare the wall appropriately. Just ensure the surface is level enough, and dust and dirt-free– which there are no indications of residual moisture. When proper preparation is done, you can easily apply adhesive and stick your fresh tiles straight onto the wall.

How to get ready for tiling a wall:.

  • Get rid of old fittings, such as pins, screws, rivets and so on
  • Repair work or remove unfit plaster.
  • If present), get rid of or pre-treat wallpaper (.
  • Fix any fractures or indications of damage.
  • Level the surface area.
  • Sand, so that the adhesive can bond.
  • Ensure the surface is grease-free, dirt and dust.
  • Pick the appropriate primer for your kind of surface area.

Other crucial preparation to do prior to you get started:

  • Measure your square footage.
  • Figure out the number of tiles needed for the job.
  • Purchase least 10% more tiles in case of breakage throughout the setup. If you’re about to install delicate patterns, you might wish to increase the amount to 20% or even 30% extra. There are no warranties when it pertains to discovering the same batch, and even one that will closely resemble what you bought, even more down the line, so this is extremely advised.

Make sure you have the ideal kind of adhesive.

According to the expert tradesmen from Wonderful Tilers, less experienced Do It Yourself enthusiasts can use the ready-mix kind of adhesive, however an expert tiler will always use the powdered option. It dries slower and hence allows you to much better change and align the whole wall tiling.

Helpful tip: When tiling cooking area splashbacks or wet spaces, or installing restroom tiles in general, adhesive need to be waterproof.

Make certain the wall is level or your tile installation might not be successful.

Tiling an uneven wall has the prospective to lead to catastrophe. A simple way to identify irregularities is by positioning something long and flat (i.e. a regular slab) on the wall and moving it across. By doing this, you can determine any inflamed areas or bumps, must they exist.

An irregular wall can prevent adhesive from sticking– which might trigger your entire wall setup to collapse. According to expert tilers, anything in between 3 and 6mm is still convenient– but anything beyond that is most likely to cause trouble.

If you decide to use a somewhat thicker layer of adhesive to compensate, its grip may loosen up– leading to undesirable concerns further down the line.

Different surfaces need various methods of preparation.

Some surface areas, such as a fresh drywall, require at least a month to effectively dry. Other cases, such as when you’re tiling on wood, need a coat of polyurethane paint. Ensure you have the best service for your particular wall and, whenever in doubt, seek advice from a professional tiler.

Tile board backers are an excellent way to deal with uneven surfaces with minimal effort.

Somewhat pricier, tile board backers can assist you resolve the problem– not to discuss that these products are resistant to moisture, and can successfully avoid mould (which is known to grow on porous products in warm, wet conditions). This advantage makes tile backer boards a practical service for bathrooms, areas and showers surrounding the cooking area sink.

The one drawback of tile backer boards is that utilising such products will make your fresh tile setup a bit more pricey.

Valuable suggestion: One crucial thing to make certain of here is that the boards are tough and well-mounted.

Can you set up brand-new tiles on top of old tiles?

Tiling over old tiles is possible– however it’s always much better to eliminate and retile.

Most tiles are too smooth for adhesive to effectively bond and, in these cases, additional treatment is required. Depending on the toolkit you have at hand, you could either attempt a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, show additional care so as not to damage the stability of your old tiling.

Essential: Constantly check for void behind old tiles. To do this, merely knock on each piece with your hand and listen out for hollow sounds. Locations with hollow space are simple to identify, but beware– if you stop working to find these and tile over them anyway, you run the risk of having your fresh tiles collapse in the fairly near future.

tiling tools

What tools will I require for a DIY tile installation?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Regular energy knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a similar tool).
  • Pencil.
  • Measuring tape.
  • Drill.
  • Pins (to support the tile until the adhesive bonds and dries off).
  • Level.

Important: Make certain your surface is constantly dust, dirt and moisture-free or there’s an opportunity your adhesive may not properly bond.

For many kinds of masonry, ceramic and vinyl tiles will stick– but for wooden surfaces, you’ll need to use a coat of paint or prime.

How do I prep drywall for a fresh tile setup?

Fresh drywall requires as much as a month before it’s ready for tiling, but when the time comes, you won’t need to tape the joints. All you’ll require to do is apply a skim coat and sand. Once done, clean the surface from dust, dry any indications of moisture and use the adhesive.

Essential: For areas rich with moisture, use waterproof plasterboard.

How do I prep old drywall for a fresh tile setup?

It’s important to correctly examine whether the wall is strong and stable enough to hold the weight of fresh tiling. If you’re uncertain, you ought to always ask for suggestions from a knowledgeable tiler.

Fill out any cracks or holes from pins, nails or any other type of wall fitting, use the guide, leave it to dry, sand one more time, and after that apply the adhesive.

How do I prep the wall for tiles if the drywall is already painted or textured?

According to specialists, you need to use PVA or make a DIY primer by adding a bit more water to your adhesive.

After that, there are a few essential tasks to look after:.

  • Remove depreciated paint.
  • Repair fractures and holes.
  • If bumps are present, sand.
  • Clean the surface.
  • Make sure there are no signs of oil or grease.

Practical suggestion: Deal with the wall with Trisodium Phosphate (TSP). It’s an effective cleaner, stain eliminator and degreaser– however remember that this should, obviously, be kept well away from kids.

How do I prep a plywood surface area for fresh tiling?

When it comes to walls, the fact is that plywood is appropriate for tiling your floorings but not as practical. The product is made of compressed wood blended with numerous oils, which indicates that heat can affect it. , if exposed to frequent regular dramatic changes in significant, tiles and grout will temperature level crack.

How do I prep a wallpapered wall for tiling?

When it concerns walls, tiles offer even more durability and usefulness than wallpaper, and the very best option is to eliminate wallpaper wherever possible. The most problem-free and effective method is by exposing the space to steam– but this approach does come with some threats. If you’re treating drywall or engineered wood via steam, the high temperatures and wetness can possibly trigger damage which is typically beyond simple repair work.

You can merely wipe the surface area with a warm and damp rag. In this manner, wetness won’t penetrate through to the substrate itself– but at the same time, the wallpaper will chill out. Repeat the treatment a couple of times and use a scraper to peel everything with very little effort.

As soon as done, all you’ll need to do prior to applying primer or adhesive is to make sure the surface is dry and clean.

You can set up brand-new tiles on different surfaces, as long you prepare the wall appropriately. When appropriate preparation is done, you can easily use adhesive and stick your fresh tiles straight onto the wall.

Locations with hollow space are simple to spot, however beware– if you fail to find these and tile over them anyway, you run the danger of having your fresh tiles collapse in the reasonably near future.

The truth is that plywood is ideal for tiling your floors however not as useful when it comes to walls. When it comes to walls, tiles offer far more durability and usefulness than wallpaper, and the best alternative is to eliminate wallpaper anywhere possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally answer in place in an array to lid roofs, floors, walls, edges, or further objects such as tabletops. Alternatively, tile can sometimes take in hand to similar units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In unorthodox sense, a tile is a construction tile or thesame object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of afire clay.

Tiles are often used to form wall and floor coverings, and can range from simple square tiles to obscure or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but further materials are after that commonly used, such as glass, cork, concrete and supplementary composite materials, and stone. Tiling stone is typically marble, onyx, granite or slate. Thinner tiles can be used upon walls than on floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button