Established in 2000, we’re among the leading tilers in Dublin. Consistency and quality are at the core of whatever we do, allowing us to become amongst the most trusted tiling business in Dublin.

With years of tiling experience, our vibrant team have fulfilled virtually every tiling demand you can possibly imagine, building lasting relationships with a host of customers & suppliers and crafting a service unlike any tiling company in Dublin. From small works to large-scale projects, we position customer satisfaction and efficiency above all else, guaranteeing we deliver on-time, in budget plan and to a high standard.

How to tile a wall

 

Create a sensational wall with appealing, practical and long lasting wall tiles

tiler dublin
Tiling is a competent job but we’re here to assist you get the best surface to your wall tiles. Whether you’re tiling a whole bathroom, a shower cubicle, a splashback in a kitchen area or a small section around a fireplace, our advice will help you accomplish a terrific outcome.
Prior to you start, it is necessary to plan your tiling. Determining the variety of tiles & adhesive you require, preparing and preparing the wall out the position of the tiles are all vital factors. Our guide to preparing your wall tiles covers all you need to know prior to tiling.
This guide will walk you through how to lay the tiles. In our example we’re tiling an entire wall with square tiles in a direct tiling style. We’ll discuss how to:

  • Repair whole tiles to a wall
  • Cut tiles for obstacles and corners and apply corner tile trim
  • Grout and surface wall tiles
  • Seal around the edges of tiling

tiling

Tools & Materials

 

Products

 

  • Wall tiles
  • Filler – if you have any holes in the wall that require filling. If the hole in the wall is larger than the size of your fist, we recommend getting an expert to make the repair work.
  • Tile adhesive – we recommend ready-mixed tile adhesive to save time
  • Tile spacers
  • Hygienic sealant – we recommend anti-mould sealant for a surface that lasts
  • Grout – we advise ready-mixed grout
  • Multi-purpose clothes
  • Tile trim – as needed.

 

Tools

 

  • Guideline
  • Measuring tape
  • Chinagraph pencil or felt-tip pen – if required, to mark tiles for cutting
  • Trowel
  • Notched trowel (also called a notched spreader).
  • Tile cutter.
  • Tile file – if needed.
  • Hacksaw – if needed, to cut the tile trim.
  • Grout spreader (likewise referred to as a grout float).
  • Grout finisher (likewise known as a grout shaper).
  • Claw hammer.
  • Sponge.
  • Bucket.
  • Spirit level.
  • Cartridge gun – if needed. Some sealant comes as a trigger gun and doesn’t need a cartridge gun. Inspect the product guidelines for the sealant.
  • Sealant smoother.

 

Security set.

 

  • Security gloves.
  • Dust mask.

 

 

Security.

 

  • When cutting tiles, wear security goggles and a dust mask to secure you from flying pieces and sharp edges.

 

How to tile a whole wall.

When you’ve planned the tiles, prepared the wall and repaired your wood battens, lay entire tiles first by following these actions.

wall tiling step 1

 

Action 1.

Scoop up some tile adhesive with the trowel and press it onto the wall, starting in the corner formed by the lumber battens. The ridges in the adhesive will make sure there’s an equivalent amount behind each tile, making it easier to get them all level.
Select an appropriate tile adhesive for your tiles: for ceramic tiles use a ready-mixed tile adhesive or powder adhesive and a powder tile adhesive for porcelain tiles.
If your tiles are larger than 20 x 20, use adhesive to the wall and likewise on the back of the tiles.

 

Step 2.

Position your very first tile into the corner, pressing its edges against the corners and the entire tile strongly against the wall. Then include a tile above it and one beside the initial tile pushing them securely into the adhesive using a twisting action.
Wipe off any adhesive from the tiles with a wet sponge as you go– if you let it dry it’ll be really hard to remove.
Leading pointer – applying mosaic tiles.
When using mosaic tiles to the wall, hold a piece of board over the tiles while the adhesive is wet and tap the board gently with a rubber mallet. This will offer the tiles a flat, even complete.
Some mosaics are set at various heights, in which case you ought to utilize your hand to ensure they’re all individually bedded into the adhesive.

Step 3.

When required, put tile spacers into the corners between the tiles and adjust the tile positions as and. Press them in strongly and place them flush versus the wall so you can grout over them.

Step 4.

Include another tile above the last one you applied, and another next to it. Continue applying the entire tiles in this way until you’ve tiled the area covered with tile adhesive.
Apply another square metre of adhesive and tiles till you have actually fixed all the entire tiles.
At the edges of the wall, put one leg of the spacer in between the tiles so the rest is standing out– we’ll eliminate this later prior to grouting.

Step 5.

Leave to dry for the length of time directed on the tile adhesive instructions.

Action 6.

Remove the vertical wood batten by prising out it’s nails with the claw of a hammer.

Action 7.

Repair whole tiles to the other area of the wall, starting from the corner beside the tiles you’ve currently repaired.

Step 8.

When all the whole tiles have been fixed and are dry, eliminate the horizontal timber batten.
Now you’ve fixed all of the entire tiles, you’re ready to fill the edges and corners of the wall. Head to ‘How to tile corners’ to find out how to do this.

How to tile corners.

In this section, we’ll talk you through tiling corners. There are two kinds of corner– external and internal. These could be corners produced by corners or walls created by blockages:.

Internal corner.

The corner join between 2 walls, for example the corner of a room, or the corner developed by a door frame.

External corner.

Outward-facing corner that protrudes into the space, for example the corner of a function wall or the edge of a window recess.
There’s a various technique for tiling depending upon the type of corner, and we’ll describe both methods in this section.
Often you may discover that you can fit entire tiles across the wall without requiring to cut a tile for the corner. If no cuts are essential, dive to the section ‘How to finish and grout wall tiles’.
You’ll require to cut a tile to fit into the corner.

How to determine and mark tiles for cutting.

There are 2 methods to determine and mark a tile for cutting:.

Alternative 1.

Hold the tile you’ll be cutting over the last whole tile in the row. Fit another against the wall and mark where it overlaps the one listed below with a tile scribe, chinagraph pencil or felt-tip pen.

Alternative 2.

Take different measurements at the top and bottom of the area you’re going to fill using a measuring tape. Mark the measurements at the top and bottom of the tile. Line up the square with the two marks and draw the line between them with a pencil or felt-tip pen, providing you a vertical line to cut along.
With the marks made, it’s time to cut the tiles. Head to our How to cut tiles post for suggestions on this.

Action 1.

After you’ve cut the tile, check to see that it fits. If you require to make any little modifications use a tile file.
If you’re likewise going to tile the nearby wall, you do not need to be totally precise as the edges will be concealed by the tiles on the other wall.

How to tile internal corners.

 

Step 1.

After you have actually cut the tile, check to see that it fits. , if you require to make any small changes use a tile file.. If you’re also going to tile the surrounding wall, you do not need to be absolutely precise as the edges will be hidden by the tiles on the other wall.

Step 2.

Utilize the narrow end of a notched spreader to put adhesive on the back of the cut tile. Then press it into place so it’s level with the nearby tile. If you require to, Usage spacers.

Action 3.

Move on to the next wall if you’re tiling more than one wall. If not, you’re ready to start grouting and ending up the tiles. For guidance on this, jump to our area ‘How to end up and grout wall tiles’.

How to tile external corners.

Use tile trims to get a neat finish on external corners. It likewise helps to protect the edges of the tiles from knocks, which could chip them. The trim is available in a series of products, shapes, colours and sizes. Here we’re utilizing white 1/4 inch external edge tile trim.

Action 1.

End up tiling your first wall.

Action 2.

Use a tape measure to determine the length of the edge that you’ll be fixing the tile trim to.

Step 3.

Measure the tile trim to the same size and make a mark on it to show where to cut. Use a hacksaw to cut the tile trim to the length you require.

Step 4.

Add a narrow strip of tile adhesive to the untiled wall using the notched trowel and press the trim into it.

Step 5.

Line the trim up with the tiles of your very first wall. Put two spacers in between the trim and each tile (one near the top of the tile and one near the bottom) to ensure there’s a gap for grout.

Step 6.

Put more tile adhesive on the untitled wall with the notched trowel. Include the adhesive vertically from top to bottom to avoid knocking the tile cut out of place with the teeth of the notched trowel.

Step 7.

Start tiling your second wall, working away from the corner trim. As you set the tiles in place, remember to permit a narrow grouting gap between them and the trim. Insert spacers and adjust the tiles as you go, so the gap stays the very same and the trim remain in location.

How to end up and grout wall tiles.

As soon as the tiles are fixed in place and the adhesive has actually dried, it’s time to use the grout.

Step 1.

Remove the extending tile spacers at the edges of the wall and at corners.

Action 2.

Beginning in the bottom left corner, press a small amount of grout onto the face of the tiles with a trowel.
Use a grout spreader, also referred to as a grout float, to spread it, making long, diagonal strokes and working it into the joints between tiles. Continue up until you’ve grouted all the joints. The grout will quickly begin to harden, so do this as fast as you can.
Divided it into areas and grout a section at a time if you’re grouting a large area. This is to prevent the grout hardening excessive whilst you end up grouting the entire location.

Step 3.

Instantly after you complete applying the grout, go over the tiles with a wet sponge (however not too damp as this may trigger discolouration) to get rid of any excess. Take care not to drag any grout from the joints.

Step 4.

Leave the grout to dry. As it does, you’ll see a powdery movie appear on the tiles from all the sponging. Wipe this off with a soft, tidy fabric.

How to seal around the edge of tiling.

Sealing around the edge of tiling is vital to stop water getting behind the tiles, especially around worktops, basins and kitchen sinks. Water behind tiles can trigger damage to the wall, fittings and components. We’ll talk you through sealing the edge of tiling with hygienic sealant.

Action 1.

Attach the nozzle to the sealant and cut off the tip, as directed by the product instructions. If needed, put the sealant into the cartridge weapon.

Step 2.

Run a continuous bead of sealant, working from one end of the tiled location to the other, from delegated right. When you’re doing this, attempt to keep a consistent pressure on the trigger of the gun and a consistent speed.

Step 3.

Smooth any irregularities in the shape of the bead with a sealant smoother (or a wet finger), but take care not to pull the sealant from the surface area.

Step 4.

 

Leave the sealant to dry.

Calculating the number of tiles & adhesive you need, preparing and preparing the wall out the position of the tiles are all vital aspects. Our guide to planning your wall tiles covers all you require to understand before tiling.

In our example we’re tiling an entire wall with square tiles in a linear tiling design. If you’re likewise going to tile the surrounding wall, you do not have to be completely precise as the edges will be hidden by the tiles on the other wall.
Start tiling your second wall, working away from the corner trim.

Modern Tiling Videos

 

 

Learn More About Tiling

 

 

Related Articles

 

 

Modern Tiling Services

 

 

Around the Web

 

Call Now Button