Established in 2000, we’re among the leading tilers in Dublin. Consistency and quality are at the core of everything we do, enabling us to become amongst the most trustworthy tiling business in Dublin.

With years of tiling experience, our vibrant team have fulfilled virtually every tiling request imaginable, constructing enduring relationships with a host of suppliers & customers and crafting a service unlike any tiling business in Dublin. From small works to large-scale tasks, we place consumer satisfaction and efficiency above all else, guaranteeing we deliver on-time, in budget and to a high requirement.

Prepare-walls-for-tiling

The Difficulties of Laying Tile

Ceramic and porcelain tile setups are typically displayed as easy on truth TELEVISION remodel shows and in remodeling manuals. Nevertheless, this is one that absolutely falls into the category of home renovating tasks that look easier than they are.

Bottom Line

Laying tile is easy but laying tile and doing it well is tough. From that angle, it might make more sense to employ a professional tiler than to do it yourself.

One way to approach it is to employ the pro for the most noticeable areas if you’re attempting to conserve money. Then you can do your own tilework in spaces that are less frequented.

One issue for do-it-yourselfers is that it is difficult to reverse tilework, should you make an error. Thinset mortar enables some repositioning. Unfortunately, thinset will likewise rearrange your tile for you, specifically in the case of vertical wall tile.

Some tilework is much easier to manage on an amateur basis, too. This guide aims to reveal you what’s more difficult, what’s much easier, and some tricks for making the project go smoother.

Easier Tilework

Jobs that tend to be easier and the themes that focus on them:

  • Dry locations: Areas where leak may happen are more difficult, involving special support material and grout-sealing. Showers, especially, can be maddening for the amateur tiler to make totally waterproof.
  • Floors vs. walls: Slippage is one thing you are constantly combating with tilework on walls.
  • Backsplashes that are more ornamental than practical.Tile in the 4″ to 12″ range: Smaller tiles, especially mosaics, shift around a lot– even if that mosaic is connected to mesh.
  • Utilizing adhesive tile mats (though this has very restricted uses).
  • Ceramic and porcelain tile vs. stone tile: Stone tile is heavy to deal with and difficult to cut.

One tip is to start your amateur tiling profession with the most out of the way location possible in order to sharpen up your abilities.

Tiling Challenges

 

  • Dry thinset mortar is cheap, however it is also challenging to blend. The service is to purchase pre-mixed mortar. While significantly more costly, pre-mixed thinset conserves you from the stress of getting water-to-thinset measurements appropriate. Plus, mixing up dry thinset is physically tough.
  • Your tile work is only as good as your substrate or subfloor. Your tile will not lie flat if you do not have a good subfloor. Lippage will occur– adjacent tile edges that are not the exact same height. Even worse, a base floor that is not solid enough will eventually trigger the tile to fracture.
  • Boundary tiles will need to be cut. You can use either a damp tile saw or what is typically informally called a breeze tile cutter for this.
  • Even tiles within the perimeter can be tough. They do not instantly fall into straight lines: you require to enforce this.
  • Laying tiles on a diagonal. Diagonal tile cutting can be a discouraging experience for the novice tiler.
  • Spacing tiles correctly is tough. Make certain to utilize plastic tile spacers to impose the correct range. While spacers are a pain to eliminate, they guarantee ideal spacing of tile joints.
  • Constantly being on your knees on a tough surface area can affect the quality of your work. For this reason alone it deserves buying an inexpensive set of tiler’s knee pads.

Thinset will likewise rearrange your tile for you, especially in the case of vertical wall tile.

Even even worse, a base floor that is not strong enough will ultimately cause the tile to fracture.
Border tiles will need to be cut. You can use either a wet tile saw or what is frequently informally called a breeze tile cutter for this. Be sure to utilize plastic tile spacers to impose the correct range.

Modern Tiling Videos

 

 

Learn More About Tiling

 

 

Related Articles

 

 

Modern Tiling Services

 

 

Around the Web

 

Call Now Button