WHY CHOOSE ModernTiling

There are several tiling business in Dublin, but it’s constantly the most crucial to trust and select. Your single click when looking for “local tilers near me” online or calling someone over the phone can help you discover a tiler in Dublin. Yet choosing the best tiling system in Dublin can be a difficult job. The problem is who to contact the Dublin tiling centers. Don’t think all of you blindly. Modern Tiling might be the perfect option for your tiling needs.

We are a licensed and qualified tiling firm in Dublin. Having several years of experience and knowledgeable business tilers in Dublin, we can enthrall the look of your location with our beautiful ceramic tiles.

How to Prepare a Wall for Tiling (Leading + detailed Tips).


Preparing your walls for a fresh wall tile setup is easy and hassle-free with our no-nonsense guide at the ready.

You can set up brand-new tiles on numerous surface areas, as long you prepare the wall properly. Just make certain the surface is level enough, and dust and dirt-free– and that there are no indications of residual wetness. When proper preparation is done, you can easily apply adhesive and stick your fresh tiles straight onto the wall.

How to prepare for tiling a wall:.

  • Get rid of old fittings, such as pins, screws, rivets and so on
  • Repair work or remove unfit plaster.
  • If present), get rid of or pre-treat wallpaper (.
  • Fix any fractures or signs of damage.
  • Level the surface area.
  • Sand, so that the adhesive can bond.
  • Ensure the surface area is dirt, dust and grease-free.
  • Select the suitable primer for your type of surface.

Other essential planning to do before you start:

  • Step your square video footage.
  • Determine the number of tiles needed for the task.
  • Purchase least 10% more tiles in case of breakage during the setup. If you’re about to set up delicate patterns, you might wish to increase the total up to 20% and even 30% extra. There are no assurances when it pertains to discovering the exact same batch, or perhaps one that will closely resemble what you purchased, further down the line, so this is highly suggested.

Ensure you have the ideal type of adhesive.

According to the expert tradespersons from Wonderful Tilers, less experienced Do It Yourself lovers can utilize the ready-mix kind of adhesive, but an expert tiler will always use the powdered service. It dries slower and thus enables you to better change and line up the entire wall tiling.

Helpful suggestion: When tiling kitchen area splashbacks or wet rooms, or setting up bathroom tiles in general, adhesive should be waterproof.

Make sure the wall is level or your tile setup might not succeed.

Tiling an unequal wall has the possible to lead to disaster. An easy way to identify abnormalities is by positioning something long and flat (i.e. a regular plank) on the wall and moving it throughout. By doing this, you can recognize any swollen locations or bumps, ought to they exist.

An uneven wall can prevent adhesive from sticking– which could cause your entire wall installation to collapse. According to professional tilers, anything in between 3 and 6mm is still workable– but anything beyond that is likely to cause trouble.

If you choose to apply a slightly thicker layer of adhesive to compensate, its grip might loosen– causing unwanted problems further down the line.

Various surfaces need different methods of preparation.

Some surface areas, such as a fresh drywall, need at least a month to correctly dry. Other cases, such as when you’re tiling on wood, require a coat of polyurethane paint. Ensure you have the best service for your particular wall and, whenever in doubt, speak with an expert tiler.

Tile board backers are a fantastic method to handle unequal surfaces with minimal effort.

Somewhat costlier, tile board backers can assist you solve the problem– not to point out that these products are resistant to moisture, and can effectively prevent mould (which is known to grow on permeable materials in warm, wet conditions). This advantage makes tile backer boards a practical solution for bathrooms, showers and areas surrounding the cooking area sink.

The one disadvantage of tile backer boards is that using such items will make your fresh tile setup a little bit more expensive.

Useful idea: One vital thing to make sure of here is that the boards are sturdy and well-mounted.

Can you set up new tiles on top of old tiles?

Tiling over old tiles is possible– however it’s constantly much better to retile and get rid of.

A lot of tiles are too smooth for adhesive to appropriately bond and, in these cases, additional treatment is needed. Depending on the toolkit you have at hand, you could either try a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, show additional caution so as not to harm the integrity of your old tiling.

Important: Always inspect for void behind old tiles. To do this, just knock on each piece with your hand and listen out for hollow sounds. Locations with hollow area are simple to spot, however beware– if you fail to find these and tile over them anyway, you run the risk of having your fresh tiles collapse in the reasonably future.

tiling tools

What tools will I require for a DIY tile installation?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Routine utility knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a similar tool).
  • Pencil.
  • Determining tape.
  • Drill.
  • Pins (to support the tile till the adhesive bonds and dries off).
  • Level.

Important: Make sure your surface area is always dust, dirt and moisture-free or there’s an opportunity your adhesive may not appropriately bond.

For the majority of kinds of masonry, ceramic and vinyl tiles will stick– but for wood surfaces, you’ll require to use a coat of paint or prime.

How do I prep drywall for a fresh tile setup?

Fresh drywall requires approximately a month before it’s ready for tiling, however when the time comes, you will not have to tape the joints. All you’ll require to do is use a skim coat and sand. When done, clean the surface area from dust, dry any signs of wetness and apply the adhesive.

Crucial: For locations abundant with wetness, use water-resistant plasterboard.

How do I prep old drywall for a fresh tile setup?

It’s crucial to correctly evaluate whether the wall is stable and strong adequate to hold the weight of fresh tiling. You should constantly ask for advice from a knowledgeable tiler if you’re uncertain.

Fill out any fractures or holes from pins, nails or any other type of wall fitting, apply the primer, leave it to dry, sand one more time, and then apply the adhesive.

How do I prep the wall for tiles if the drywall is already painted or textured?

According to specialists, you must use PVA or make a Do It Yourself primer by adding a bit more water to your adhesive.

After that, there are a few essential jobs to take care of:.

  • Remove diminished paint.
  • Repair fractures and holes.
  • If bumps are present, sand.
  • Wipe the surface.
  • Make sure there are no signs of oil or grease.

Useful tip: Treat the wall with Trisodium Phosphate (TSP). It’s a powerful cleaning agent, stain eliminator and degreaser– but bear in mind that this should, obviously, be kept well away from children.

How do I prep a plywood surface for fresh tiling?

When it comes to walls, the fact is that plywood is suitable for tiling your floors however not as practical. The material is made from compressed wood blended with various oils, which indicates that heat can affect it. If exposed to regular and dramatic modifications in temperature level, tiles and grout will likely crack.

How do I prep a wallpapered wall for tiling?

When it comes to walls, tiles offer much more longevity and practicality than wallpaper, and the very best option is to eliminate wallpaper wherever possible. The most hassle-free and efficient method is by exposing the room to steam– but this technique does feature some risks. The high temperatures and wetness can potentially trigger damage which is frequently beyond basic repair if you’re dealing with drywall or engineered wood through steam.

You can simply wipe the surface area with a warm and wet rag. This way, wetness will not penetrate through to the substrate itself– but at the same time, the wallpaper will loosen up. Repeat the procedure a few times and utilize a scraper to peel whatever with minimal effort.

As soon as done, all you’ll require to do prior to using guide or adhesive is to make certain the surface is clean and dry.

You can install brand-new tiles on numerous surfaces, as long you prepare the wall appropriately. When proper preparation is done, you can easily use adhesive and stick your fresh tiles straight onto the wall.

Areas with hollow space are simple to find, but beware– if you stop working to find these and tile over them anyway, you run the danger of having your fresh tiles collapse in the fairly near future.

The truth is that plywood is appropriate for tiling your floorings however not as practical when it comes to walls. When it comes to walls, tiles offer far more durability and functionality than wallpaper, and the finest alternative is to eliminate wallpaper anywhere possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally unquestionable in place in an array to lid roofs, floors, walls, edges, or other objects such as tabletops. Alternatively, tile can sometimes tackle to thesame units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In marginal sense, a tile is a construction tile or thesame object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of ablaze clay.

Tiles are often used to form wall and floor coverings, and can range from easy square tiles to complex or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but new materials are afterward commonly used, such as glass, cork, concrete and supplementary composite materials, and stone. Tiling rock is typically marble, onyx, granite or slate. Thinner tiles can be used upon walls than upon floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button