WHY SELECT Modern Tiling

There are a number of tiling companies in Dublin, but it’s always the most essential to trust and select. Your single click when searching for “local tilers near me” online or calling somebody over the phone can assist you discover a tiler in Dublin. Picking the best tiling system in Dublin can be a complicated job. The issue is who to get in touch with the Dublin tiling facilities. Do not think all of you blindly. Modern Tiling might be the ideal option for your tiling needs.

We are a competent and certified tiling company in Dublin. Having several years of experience and knowledgeable commercial tilers in Dublin, we can mesmerize the look of your place with our lovely ceramic tiles.

How to Prepare a Wall for Tiling (Step-by-Step + Top Tips).


Preparing your walls for a fresh wall tile installation is problem-free and easy with our no-nonsense guide ready.

You can set up brand-new tiles on various surfaces, as long you prepare the wall appropriately. Just ensure the surface is level enough, and dust and dirt-free– and that there are no indications of recurring wetness. When proper preparation is done, you can quickly use adhesive and stick your fresh tiles straight onto the wall.

How to prepare for tiling a wall:.

  • Eliminate old fittings, such as pins, screws, rivets etc
  • Repair work or get rid of unfit plaster.
  • Eliminate or pre-treat wallpaper (if present).
  • Fix any fractures or indications of damage.
  • Level the surface area.
  • Sand, so that the adhesive can bond.
  • Make sure the surface area is grease-free, dust and dirt.
  • Choose the suitable guide for your kind of surface area.

Other essential preparation to do prior to you begin:

  • Procedure your square footage.
  • Figure out the variety of tiles needed for the job.
  • Purchase least 10% more tiles in case of damage during the setup. You may want to increase the quantity to 20% or even 30% additional if you’re about to set up delicate patterns. There are no guarantees when it pertains to finding the very same batch, and even one that will carefully resemble what you purchased, even more down the line, so this is extremely recommended.

Ensure you have the best type of adhesive.

According to the professional tradespersons from Fantastic Tilers, less skilled Do It Yourself enthusiasts can use the ready-mix type of adhesive, however an expert tiler will always apply the powdered service. It dries slower and therefore enables you to better change and align the whole wall tiling.

Useful suggestion: When tiling kitchen splashbacks or damp spaces, or installing bathroom tiles in general, adhesive should be water-resistant.

Ensure the wall is level or your tile setup may not succeed.

Tiling an uneven wall has the prospective to result in disaster. A simple way to identify abnormalities is by placing something long and flat (i.e. a routine slab) on the wall and moving it across. In this manner, you can identify any inflamed locations or bumps, should they exist.

An uneven wall can avoid adhesive from sticking– which might trigger your entire wall installation to collapse. According to expert tilers, anything between 3 and 6mm is still practical– however anything beyond that is likely to cause trouble.

Its grip might loosen up– leading to unwanted problems even more down the line if you choose to apply a somewhat thicker layer of adhesive to compensate.

Various surface areas need different ways of preparation.

Some surfaces, such as a fresh drywall, need at least a month to properly dry. Other cases, such as when you’re tiling on wood, need a coat of polyurethane paint. Ensure you have the best solution for your specific wall and, whenever in doubt, speak with an expert tiler.

Tile board backers are a terrific way to handle uneven surfaces with minimal effort.

Although a little pricier, tile board backers can help you solve the problem– not to mention that these products are resistant to moisture, and can effectively prevent mould (which is known to grow on porous materials in warm, damp conditions). This advantage makes tile backer boards a practical solution for locations, showers and restrooms surrounding the cooking area sink.

The one disadvantage of tile backer boards is that using such items will make your fresh tile setup a little more costly.

Helpful tip: One essential thing to make certain of here is that the boards are well-mounted and tough.

Can you install new tiles on top of old tiles?

Tiling over old tiles is possible– however it’s constantly better to remove and retile.

Most tiles are too smooth for adhesive to correctly bond and, in these cases, additional treatment is needed. Depending upon the toolkit you have at hand, you could either attempt a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, act with extra caution so as not to damage the integrity of your old tiling.

Essential: Always examine for void behind old tiles. To do this, merely knock on each piece with your hand and listen out for hollow noises. Locations with hollow area are easy to spot, but beware– if you stop working to identify these and tile over them anyhow, you risk of having your fresh tiles collapse in the reasonably future.

tiling tools

What tools will I need for a DIY tile installation?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Regular energy knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a similar tool).
  • Pencil.
  • Determining tape.
  • Drill.
  • Pins (to support the tile until the adhesive bonds and dries off).
  • Level.

Crucial: Make certain your surface area is always dust, dirt and moisture-free or there’s a possibility your adhesive may not effectively bond.

For most types of masonry, ceramic and vinyl tiles will stick– but for wood surface areas, you’ll require to use a coat of paint or prime.

How do I prep drywall for a fresh tile installation?

Fresh drywall requires approximately a month before it’s ready for tiling, however when the time comes, you will not need to tape the joints. All you’ll need to do is use a skim coat and sand. As soon as done, tidy the surface from dust, dry any indications of moisture and apply the adhesive.

Crucial: For areas rich with moisture, usage waterproof plasterboard.

How do I prep old drywall for a fresh tile installation?

It’s essential to appropriately examine whether the wall is steady and strong sufficient to hold the weight of fresh tiling. You must always ask for advice from an experienced tiler if you’re uncertain.

Complete any cracks or holes from pins, nails or any other type of wall fitting, apply the guide, leave it to dry, sand one more time, and then use the adhesive.

How do I prep the wall for tiles if the drywall is currently painted or textured?

According to specialists, you must use PVA or make a DIY primer by including a bit more water to your adhesive.

After that, there are a couple of important jobs to take care of:.

  • Remove depreciated paint.
  • Repair fractures and holes.
  • If bumps are present, sand.
  • Clean the surface.
  • Make sure there are no indications of oil or grease.

Handy tip: Deal with the wall with Trisodium Phosphate (TSP). It’s a powerful cleaner, stain eliminator and degreaser– however keep in mind that this should, naturally, be kept well away from children.

How do I prep a plywood surface for fresh tiling?

The fact is that plywood appropriates for tiling your floors however not as practical when it concerns walls. The material is made of compressed wood combined with numerous oils, which implies that heat can impact it. , if exposed to dramatic regular frequent changes in temperature, tiles and modifications will likely crack.

How do I prep a wallpapered wall for tiling?

When it concerns walls, tiles provide even more durability and practicality than wallpaper, and the best choice is to get rid of wallpaper anywhere possible. The most effective and hassle-free way is by exposing the room to steam– but this approach does come with some dangers. If you’re dealing with drywall or engineered wood via steam, the heats and wetness can potentially cause damage which is typically beyond easy repair.

Alternatively, you can simply wipe the surface area with a warm and wet rag. By doing this, moisture won’t permeate through to the substrate itself– however at the same time, the wallpaper will chill out. Repeat the procedure a couple of times and use a scraper to peel whatever with very little effort.

When done, all you’ll need to do prior to applying guide or adhesive is to make certain the surface is dry and clean.

You can set up brand-new tiles on various surface areas, as long you prepare the wall appropriately. When appropriate preparation is done, you can easily apply adhesive and stick your fresh tiles straight onto the wall.

Areas with hollow area are simple to spot, however beware– if you fail to spot these and tile over them anyway, you run the danger of having your fresh tiles collapse in the reasonably near future.

The truth is that plywood is ideal for tiling your floors however not as useful when it comes to walls. When it comes to walls, tiles use far more longevity and functionality than wallpaper, and the best alternative is to remove wallpaper wherever possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally total in place in an array to lid roofs, floors, walls, edges, or other objects such as tabletops. Alternatively, tile can sometimes direct to same units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In option sense, a tile is a construction tile or thesame object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of enthusiastic clay.

Tiles are often used to form wall and floor coverings, and can range from easy square tiles to obscure or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but additional materials are furthermore commonly used, such as glass, cork, concrete and other composite materials, and stone. Tiling rock is typically marble, onyx, granite or slate. Thinner tiles can be used on walls than upon floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button