Developed in 2000, we’re amongst the leading tilers in Dublin. Consistency and quality are at the core of whatever we do, enabling us to end up being among the most trusted tiling companies in Dublin.

With decades of tiling experience, our dynamic group have actually satisfied practically every tiling request you can possibly imagine, constructing enduring relationships with a host of clients & suppliers and crafting a service unlike any tiling business in Dublin. From minor works to massive projects, we position customer satisfaction and performance above all else, guaranteeing we deliver on-time, in budget and to a high requirement.

How to tile a wall


Create a sensational wall with attractive, durable and practical wall tiles

tiler dublin
Tiling is an experienced job but we’re here to help you get the very best finish to your wall tiles. Whether you’re tiling a whole restroom, a shower cubicle, a splashback in a cooking area or a little section around a fireplace, our guidance will assist you achieve a great outcome.
Prior to you start, it is necessary to prepare your tiling. Calculating the number of tiles & adhesive you require, preparing the wall and planning out the position of the tiles are all vital factors. Our guide to preparing your wall tiles covers all you require to know prior to tiling.
This guide will stroll you through how to lay the tiles. In our example we’re tiling a whole wall with square tiles in a linear tiling style. We’ll discuss how to:

  • Fix whole tiles to a wall
  • Cut tiles for corners and challenges and apply corner tile trim
  • Grout and finish wall tiles
  • Seal around the edges of tiling


Tools & Materials




  • Wall tiles
  • Filler – if you have any holes in the wall that need filling. If the hole in the wall is larger than the size of your fist, we recommend getting a professional to make the repair work.
  • Tile adhesive – we suggest ready-mixed tile adhesive to save time
  • Tile spacers
  • Sanitary sealant – we suggest anti-mould sealant for a surface that lasts
  • Grout – we encourage ready-mixed grout
  • Multi-purpose clothes
  • Tile trim – as needed.




  • Rule
  • Measuring tape
  • Chinagraph pencil or felt-tip pen – if needed, to mark tiles for cutting
  • Trowel
  • Notched trowel (likewise known as a notched spreader).
  • Tile cutter.
  • Tile file – if needed.
  • Hacksaw – if required, to cut the tile trim.
  • Grout spreader (also known as a grout float).
  • Grout finisher (also referred to as a grout shaper).
  • Claw hammer.
  • Sponge.
  • Container.
  • Level.
  • Cartridge weapon – if required. Some sealant comes as a trigger weapon and doesn’t require a cartridge weapon. Inspect the item instructions for the sealant.
  • Sealant smoother.


Safety set.


  • Security gloves.
  • Dust mask.





  • Wear safety goggles and a dust mask to protect you from flying pieces and sharp edges when cutting tiles.


How to tile a whole wall.

When you’ve prepared the tiles, prepared the wall and repaired your lumber battens, lay entire tiles initially by following these steps.

wall tiling step 1


Step 1.

Scoop up some tile adhesive with the trowel and press it onto the wall, starting in the corner formed by the lumber battens. Then spread it with the notched trowel, working far from the corner with horizontal strokes. Hold the edge of the notched trowel at an angle of about 45 °. The ridges in the adhesive will ensure there’s an equal quantity behind each tile, making it much easier to get them all level. Attempt not to work on more than one square metre at a time, as the adhesive could begin solidifying before you’ve put all the tiles in place.
Pick a suitable tile adhesive for your tiles: for ceramic tiles use a ready-mixed tile adhesive or powder adhesive and a powder tile adhesive for porcelain tiles.
If your tiles are larger than 20 x 20, use adhesive to the wall and also on the back of the tiles.


Action 2.

Put your first tile into the corner, pressing its edges versus the corners and the entire tile strongly versus the wall. Include a tile above it and one next to the original tile pushing them firmly into the adhesive utilizing a twisting action.
If you let it dry it’ll be extremely hard to take off, wipe off any adhesive from the tiles with a wet sponge as you go–.
Top tip – applying mosaic tiles.
When applying mosaic tiles to the wall, hold a piece of board over the tiles while the adhesive is wet and tap the board gently with a rubber mallet. This will offer the tiles a flat, even finish.
Some mosaics are set at different heights, in which case you need to utilize your hand to guarantee they’re all individually bedded into the adhesive.

Step 3.

Put tile spacers into the corners between the tiles and change the tile positions as and when required. Push them in strongly and place them flush against the wall so you can grout over them.

Step 4.

Add another tile above the last one you applied, and another beside it. Continue applying the whole tiles in this way till you’ve tiled the area covered with tile adhesive.
Apply another square metre of adhesive and tiles until you have fixed all the entire tiles.
At the edges of the wall, put one leg of the spacer in between the tiles so the rest is sticking out– we’ll eliminate this later prior to grouting.

Step 5.

Delegate dry for the length of time directed on the tile adhesive guidelines.

Step 6.

Remove the vertical timber batten by prising out it’s nails with the claw of a hammer.

Action 7.

Fix whole tiles to the other section of the wall, starting from the corner beside the tiles you have actually currently repaired.

Step 8.

Once all the entire tiles have been repaired and are dry, get rid of the horizontal timber batten.
Now you have actually fixed all of the entire tiles, you’re ready to fill the edges and corners of the wall. Head to ‘How to tile corners’ to learn how to do this.

How to tile corners.

In this area, we’ll talk you through tiling corners. There are 2 kinds of corner– internal and external. These could be corners produced by corners or walls created by blockages:.

Internal corner.

The corner join between two walls, for example the corner of a room, or the corner developed by a door frame.

External corner.

Outward-facing corner that extends into the room, for instance the corner of a feature wall or the edge of a window recess.
There’s a various approach for tiling depending on the kind of corner, and we’ll describe both methods in this area.
In some cases you may find that you can fit whole tiles throughout the wall without needing to cut a tile for the corner. If no cuts are essential, jump to the section ‘How to grout and complete wall tiles’.
For the most part, you’ll need to cut a tile to fit into the corner.

How to measure and mark tiles for cutting.

There are two methods to mark a tile and determine for cutting:.

Choice 1.

Hold the tile you’ll be cutting over the last entire tile in the row. Fit another against the wall and mark where it overlaps the one listed below with a tile scribe, chinagraph pencil or felt-tip pen.

Alternative 2.

Take different measurements at the top and bottom of the area you’re going to fill using a tape measure. Mark the measurements at the top and bottom of the tile. Line up the square with the two marks and draw a line in between them with a pencil or felt-tip pen, providing you a vertical line to cut along.
With the marks made, it’s time to cut the tiles. Head to our How to cut tiles post for recommendations on this.

Step 1.

After you have actually cut the tile, check to see that it fits. If you need to make any small changes utilize a tile file.
If you’re also going to tile the nearby wall, you don’t have to be completely accurate as the edges will be concealed by the tiles on the other wall.

How to tile internal corners.


Action 1.

After you’ve cut the tile, check to see that it fits. , if you require to make any small adjustments utilize a tile file.. If you’re likewise going to tile the nearby wall, you don’t need to be absolutely precise as the edges will be concealed by the tiles on the other wall.

Step 2.

Use the narrow end of a notched spreader to put adhesive on the back of the cut tile. Then press it into location so it’s level with the adjacent tile. If you require to, Use spacers.

Action 3.

Move on to the next wall if you’re tiling more than one wall. If not, you’re ready to begin grouting and ending up the tiles. For guidance on this, dive to our area ‘How to grout and finish wall tiles’.

How to tile external corners.

Usage tile trims to get a cool finish on external corners. It likewise helps to protect the edges of the tiles from knocks, which might chip them.

Action 1.

Finish tiling your first wall.

Step 2.

Utilize a measuring tape to measure the length of the edge that you’ll be fixing the tile trim to.

Step 3.

Procedure the tile trim to the exact same size and make a mark on it to suggest where to cut. Use a hacksaw to cut the tile trim to the length you need.

Step 4.

Add a narrow strip of tile adhesive to the untiled wall using the notched trowel and press the trim into it.

Step 5.

Line the trim up with the tiles of your very first wall. Put two spacers between the trim and each tile (one near the top of the tile and one near the bottom) to ensure there’s a gap for grout.

Step 6.

Put more tile adhesive on the untitled wall with the notched trowel. Include the adhesive vertically from top to bottom to avoid knocking the tile trim out of place with the teeth of the notched trowel.

Action 7.

Start tiling your 2nd wall, working far from the corner trim. As you set the tiles in place, remember to allow a narrow grouting space between them and the trim. Insert spacers and adjust the tiles as you go, so the space stays the exact same and the trim stays in location.

How to end up and grout wall tiles.

As soon as the tiles are fixed in place and the adhesive has actually dried, it’s time to apply the grout.

Action 1.

Remove the extending tile spacers at the edges of the wall and at corners.

Action 2.

Beginning in the bottom left corner, press a small amount of grout onto the face of the tiles with a trowel.
Use a grout spreader, likewise called a grout float, to spread it, making long, diagonal strokes and working it into the joints in between tiles. Continue till you’ve grouted all the joints. The grout will quickly begin to solidify, so do this as fast as you can.
If you’re grouting a large location, split it into areas and grout an area at a time. This is to prevent the grout solidifying too much whilst you complete grouting the entire location.

Action 3.

Right away after you finish applying the grout, discuss the tiles with a moist sponge (however not too damp as this might trigger discolouration) to get rid of any excess. Make sure not to drag any grout from the joints.

Step 4.

Leave the grout to dry. As it does, you’ll observe a powdery movie appear on the tiles from all the sponging. Wipe this off with a soft, clean fabric.

How to seal around the edge of tiling.

Sealing around the edge of tiling is important to stop water supporting the tiles, particularly around worktops, basins and cooking area sinks. Water behind tiles can cause damage to the wall, fixtures and fittings. We’ll talk you through sealing the edge of tiling with hygienic sealant.

Step 1.

Connect the nozzle to the sealant and cut off the tip, as directed by the product instructions. If required, put the sealant into the cartridge weapon.

Step 2.

Run a continuous bead of sealant, working from one end of the tiled area to the other, from delegated right. Try to keep a steady pressure on the trigger of the gun and a consistent speed when you’re doing this.

Action 3.

Smooth any abnormalities in the shape of the bead with a sealant smoother (or a wet finger), but take care not to pull the sealant from the surface.

Step 4.


Leave the sealant to dry.

Calculating the number of tiles & adhesive you need, preparing the wall and planning out the position of the tiles are all vital aspects. Our guide to planning your wall tiles covers all you need to know before tiling.

In our example we’re tiling an entire wall with square tiles in a direct tiling style. If you’re likewise going to tile the adjacent wall, you don’t have to be completely accurate as the edges will be hidden by the tiles on the other wall.
Start tiling your 2nd wall, working away from the corner trim.

Modern Tiling Videos



Learn More About Tiling



Related Articles



Modern Tiling Services



Around the Web


Call Now Button