Developed in 2000, we’re among the leading tilers in Dublin. Consistency and quality are at the core of everything we do, enabling us to end up being among the most trustworthy tiling companies in Dublin.

With decades of tiling experience, our dynamic group have satisfied virtually every tiling request you can possibly imagine, building long lasting relationships with a host of providers & customers and crafting a service unlike any tiling company in Dublin. From small works to massive projects, we place customer complete satisfaction and performance above all else, ensuring we provide on-time, in budget and to a high standard.

Easy DIY Tiling Tips for Amateurs

tilers dublin

Including tile to your home is an excellent way to update the look of a space. Whether you are tiling an entranceway flooring, adding a little color to your cooking area with a backsplash, or dealing with a total bathroom restoration, setting up the tile yourself is nothing to be scared of.

  1. You’ll need to know how much tile you’ll need, so thoroughly measure your space and figure out the square footage. Due to the fact that tiles come in numerous sizes, the general square video is essential to acquiring the ideal amount.
  2. For best results, install backer-board (water resistant if it’s in a bathroom) to the surface area that you will be tiling; it offers a smooth, even surface area for much better tile adhesion. Use a light coat of glue or tile adhesive (ask your tile supplier whether mastic or mortar will work best for you) and screws to affix it to the walls. If you are tiling a flooring, present a waterproof underlay (offered in your home improvement stores) to cover the entire area that will be tiled.
  3. Find the center of the location to be tiled and, utilizing a level, draw one line horizontally and one line vertically to create quadrants of the area you’re tiling.
  4. When you have your tile design identified (try to avoid too many cuts and understand keeping the style centered), start at the center of the area you marked, and spread out the tile adhesive onto the backer-board into among the quadrants in ten-square-foot areas utilizing a notched trowel. Continue to spread out the adhesive till it is even and the notches appear as they assist the tile stick to the wall.
  5. At the center point of the quadrant, start laying the tiles horizontally, applying mild pressure to press the tiles into the adhesive. For best results, location tile spacers in between each tile for an even design. Use a level or A-square to guarantee that the tiles are straight. Continue including adhesive and tiles, pursuing the outer edge of the tile area.
  6. For tile pieces that are too huge, use a snap cutter or damp saw to make straight cuts. If a tile needs to be notched or have a centerpiece eliminated to accommodate an outlet, use a wet saw, being careful not to cut beyond the required opening.
  7. Let the tile sit overnight. Next, using a trowel, use the grout to the tile, working from one corner to the opposite side of the space. Make sure to use the grout freely and uniformly, making certain that it actually fills in the gaps in between all of the tiles.
  8. Allow the grout to dry for 30 minutes. As soon as dry, wash away the excess grout with a clean sponge.
  9. For best results, use a tile sealant to prevent the grout from being stained or becoming subject to moisture.

Utilize a light coat of glue or tile adhesive (ask your tile provider whether mastic or mortar will work best for you) and screws to affix it to the walls. If you are tiling a floor, roll out a water resistant underlay (readily available at house enhancement stores) to cover the whole area that will be tiled.
As soon as you have your tile design identified (attempt to prevent too lots of cuts and be conscious of keeping the design focused), begin at the center of the location you marked, and spread the tile adhesive onto the backer-board into one of the quadrants in ten-square-foot areas utilizing a notched trowel. At the center point of the quadrant, start laying the tiles horizontally, applying mild pressure to press the tiles into the adhesive. Continue including adhesive and tiles, working toward the outer edge of the tile area.

Modern Tiling Videos

 

 

Learn More About Tiling

 

 

Related Articles

 

 

Modern Tiling Services

 

 

Around the Web

 

Call Now Button