Welcome to Modern Tiling. Developed in 2000, we’re amongst the leading tilers in Dublin. With years of experience, we specialise in delivering top quality residential tiling & commercial tiling services throughout Dublin. Consistency and quality are at the core of whatever we do, allowing us to become amongst the most reliable tiling companies in Dublin.

With years of tiling experience, our vibrant group have fulfilled practically every tiling request you can possibly imagine, constructing long lasting relationships with a host of providers & clients and crafting a service unlike any tiling company in Dublin. From minor works to massive projects, we position customer satisfaction and effectiveness above all else, ensuring we deliver on-time, in budget and to a high standard.

How to tile a wall

 

Develop a sensational wall with attractive, practical and long lasting wall tiles

tiler dublin
Tiling is a proficient job however we’re here to assist you get the very best finish to your wall tiles. Whether you’re tiling an entire restroom, a shower cubicle, a splashback in a kitchen or a little area around a fireplace, our advice will assist you achieve a great result.
Prior to you start, it’s important to prepare your tiling. Determining the variety of tiles & adhesive you require, preparing the wall and preparing out the position of the tiles are all important factors. Our guide to preparing your wall tiles covers all you need to know prior to tiling.
This guide will stroll you through how to lay the tiles. In our example we’re tiling an entire wall with square tiles in a linear tiling design. We’ll describe how to:

  • Repair entire tiles to a wall
  • Cut tiles for corners and barriers and apply corner tile trim
  • Grout and surface wall tiles
  • Seal around the edges of tiling

tiling

Tools & Materials

 

Products

 

  • Wall tiles
  • Filler – if you have any holes in the wall that need filling. We suggest getting a professional to make the repair if the hole in the wall is larger than the size of your fist.
  • Tile adhesive – we suggest ready-mixed tile adhesive to conserve time
  • Tile spacers
  • Sanitary sealant – we recommend anti-mould sealant for a surface that lasts
  • Grout – we advise ready-mixed grout
  • Multi-purpose fabrics
  • Tile trim – as needed.

 

Tools

 

  • Rule
  • Tape measure
  • Chinagraph pencil or felt-tip pen – if needed, to mark tiles for cutting
  • Trowel
  • Notched trowel (likewise known as a notched spreader).
  • Tile cutter.
  • Tile file – if needed.
  • Hacksaw – if required, to cut the tile trim.
  • Grout spreader (also referred to as a grout float).
  • Grout finisher (also known as a grout shaper).
  • Claw hammer.
  • Sponge.
  • Pail.
  • Level.
  • Cartridge gun – if required. Some sealant comes as a trigger gun and doesn’t require a cartridge gun. Examine the item guidelines for the sealant.
  • Sealant smoother.

 

Safety package.

 

  • Safety gloves.
  • Dust mask.

 

 

Security first.

 

  • Wear security goggles and a dust mask to safeguard you from flying fragments and sharp edges when cutting tiles.

 

How to tile a whole wall.

When you have actually planned the tiles, prepared the wall and repaired your lumber battens, lay entire tiles initially by following these actions.

wall tiling step 1

 

Step 1.

Scoop up some tile adhesive with the trowel and press it onto the wall, starting in the corner formed by the wood battens. Spread it with the notched trowel, working away from the corner with horizontal strokes. Hold the edge of the notched trowel at an angle of about 45 °. The ridges in the adhesive will ensure there’s an equivalent amount behind each tile, making it simpler to get them all level. Try not to deal with more than one square metre at a time, as the adhesive might begin solidifying before you have actually put all the tiles in place.
Choose an appropriate tile adhesive for your tiles: for ceramic tiles utilize a ready-mixed tile adhesive or powder adhesive and a powder tile adhesive for porcelain tiles.
If your tiles are larger than 20 x 20, use adhesive to the wall and likewise on the back of the tiles.

 

Step 2.

Place your very first tile into the corner, pressing its edges against the corners and the whole tile securely versus the wall. Include a tile above it and one next to the original tile pushing them securely into the adhesive utilizing a twisting action.
If you let it dry it’ll be really difficult to take off, wipe off any adhesive from the tiles with a moist sponge as you go–.
Leading pointer – using mosaic tiles.
When using mosaic tiles to the wall, hold a piece of board over the tiles while the adhesive is wet and tap the board lightly with a rubber mallet. This will provide the tiles a flat, even end up.
Some mosaics are set at different heights, in which case you need to utilize your hand to ensure they’re all separately bedded into the adhesive.

Action 3.

Put tile spacers into the corners in between the tiles and change the tile positions as and when needed. Press them in firmly and place them flush versus the wall so you can grout over them.

Step 4.

Include another tile above the last one you applied, and another next to it. Continue using the entire tiles in this way until you have actually tiled the location covered with tile adhesive.
Apply another square metre of adhesive and tiles up until you have actually fixed all the whole tiles.
At the edges of the wall, put one leg of the spacer in between the tiles so the rest is sticking out– we’ll eliminate this later prior to grouting.

Step 5.

Delegate dry for the length of time directed on the tile adhesive guidelines.

Action 6.

Get rid of the vertical wood batten by prising out it’s nails with the claw of a hammer.

Step 7.

Repair entire tiles to the other section of the wall, beginning with the corner next to the tiles you’ve currently repaired.

Step 8.

When all the whole tiles have been repaired and are dry, get rid of the horizontal wood batten.
Now you’ve fixed all of the entire tiles, you’re ready to fill the edges and corners of the wall. Head to ‘How to tile corners’ to find out how to do this.

How to tile corners.

In this area, we’ll talk you through tiling corners. There are two kinds of corner– external and internal. These could be corners produced by corners or walls created by blockages:.

Internal corner.

The corner sign up with in between 2 walls, for instance the corner of a space, or the corner developed by a door frame.

External corner.

Outward-facing corner that extends into the space, for example the corner of a feature wall or the edge of a window recess.
There’s a various method for tiling depending upon the type of corner, and we’ll describe both approaches in this section.
Often you may discover that you can fit entire tiles throughout the wall without needing to cut a tile for the corner. If no cuts are essential, dive to the section ‘How to grout and finish wall tiles’.
You’ll need to cut a tile to fit into the corner.

How to determine and mark tiles for cutting.

There are two ways to mark a tile and measure for cutting:.

Choice 1.

Hold the tile you’ll be cutting over the last entire tile in the row. Fit another versus the wall and mark where it overlaps the one below with a tile scribe, chinagraph pencil or felt-tip pen.

Option 2.

Take different measurements at the top and bottom of the area you’re going to fill using a tape measure. Mark the measurements at the top and bottom of the tile. Line up the square with the two marks and draw a line between them with a pencil or felt-tip pen, providing you a vertical line to cut along.
With the marks made, it’s time to cut the tiles. Head to our How to cut tiles short article for guidance on this.

Step 1.

After you have actually cut the tile, check to see that it fits. If you require to make any small modifications use a tile file.
If you’re also going to tile the surrounding wall, you do not need to be totally accurate as the edges will be hidden by the tiles on the other wall.

How to tile internal corners.

 

Step 1.

After you’ve cut the tile, check to see that it fits. If you require to make any little modifications use a tile file. If you’re also going to tile the surrounding wall, you do not need to be completely accurate as the edges will be hidden by the tiles on the other wall.

Action 2.

Utilize the narrow end of a notched spreader to put adhesive on the back of the cut tile. Then press it into location so it’s level with the adjacent tile. Use spacers if you need to.

Step 3.

If you’re tiling more than one wall, move on to the next wall. If not, you’re ready to start grouting and completing the tiles. For guidance on this, jump to our section ‘How to complete and grout wall tiles’.

How to tile external corners.

Use tile trims to get a cool surface on external corners. It also helps to safeguard the edges of the tiles from knocks, which might chip them. The trim is available in a range of products, sizes, colours and shapes. Here we’re utilizing white 1/4 inch external edge tile trim.

Step 1.

Finish tiling your first wall.

Step 2.

Use a measuring tape to determine the length of the edge that you’ll be repairing the tile trim to.

Action 3.

Procedure the tile trim to the exact same size and make a mark on it to indicate where to cut. Utilize a hacksaw to cut the tile trim to the length you require.

Step 4.

Include a narrow strip of tile adhesive to the untiled wall using the notched trowel and press the trim into it.

Step 5.

Line the trim up with the tiles of your first wall. Put 2 spacers between the trim and each tile (one near the top of the tile and one near the bottom) to make certain there’s a space for grout.

Step 6.

Put more tile adhesive on the untitled wall with the notched trowel. Add the adhesive vertically from top to bottom to prevent knocking the tile trim out of place with the teeth of the notched trowel.

Step 7.

Start tiling your second wall, working away from the corner trim. As you set the tiles in place, remember to enable a narrow grouting space between them and the trim. Place spacers and adjust the tiles as you go, so the space remains the same and the trim stays in location.

How to complete and grout wall tiles.

Once the tiles are repaired in place and the adhesive has dried, it’s time to use the grout.

Step 1.

Eliminate the protruding tile spacers at the edges of the wall and at corners.

Action 2.

Beginning in the bottom left corner, press a small amount of grout onto the face of the tiles with a trowel.
Use a grout spreader, likewise called a grout float, to spread it, making long, diagonal strokes and working it into the joints in between tiles. Continue up until you’ve grouted all the joints. The grout will soon start to solidify, so do this as fast as you can.
Split it into areas and grout an area at a time if you’re grouting a large location. This is to avoid the grout solidifying excessive whilst you finish grouting the entire location.

Action 3.

Right away after you complete applying the grout, go over the tiles with a moist sponge (however not too damp as this may cause discolouration) to remove any excess. Take care not to drag any grout from the joints.

Step 4.

Leave the grout to dry. As it does, you’ll see a powdery film appear on the tiles from all the sponging. Clean this off with a soft, tidy fabric.

How to seal around the edge of tiling.

Sealing around the edge of tiling is necessary to stop water supporting the tiles, particularly around worktops, basins and cooking area sinks. Water behind tiles can trigger damage to the wall, components and fittings. We’ll talk you through sealing the edge of tiling with hygienic sealant.

Action 1.

Connect the nozzle to the sealant and cut off the tip, as directed by the product guidelines. If needed, put the sealant into the cartridge gun.

Step 2.

Run a constant bead of sealant, working from one end of the tiled location to the other, from left to. Attempt to keep a stable pressure on the trigger of the weapon and a constant speed when you’re doing this.

Action 3.

Smooth any irregularities in the shape of the bead with a sealant smoother (or a wet finger), but make sure not to pull the sealant from the surface area.

Step 4.

 

Leave the sealant to dry.

Calculating the number of tiles & adhesive you need, preparing the wall and planning out the position of the tiles are all important aspects. Our guide to preparing your wall tiles covers all you require to know before tiling.

In our example we’re tiling a whole wall with square tiles in a linear tiling style. If you’re likewise going to tile the surrounding wall, you don’t have to be totally accurate as the edges will be concealed by the tiles on the other wall.
Start tiling your second wall, working away from the corner trim.

Modern Tiling Videos

 

 

Learn More About Tiling

 

 

Related Articles

 

 

Modern Tiling Services

 

 

Around the Web

 

Call Now Button