WHY PICK ModernTiling

There are numerous tiling companies in Dublin, however it’s always the most important to trust and select. Your single click when browsing for “regional tilers near me” online or calling somebody over the phone can assist you find a tiler in Dublin. Picking the ideal tiling system in Dublin can be a daunting task.

We are a licensed and competent tiling firm in Dublin. Having several years of experience and competent industrial tilers in Dublin, we can enthrall the look of your place with our gorgeous ceramic tiles.

How to Prepare a Wall for Tiling (Detailed + Leading Tips).

tilers

Preparing your walls for a fresh wall tile installation is basic and hassle-free with our no-nonsense guide at the ready.

You can install new tiles on various surfaces, as long you prepare the wall appropriately. Just ensure the surface is level enough, and dust and dirt-free– which there are no indications of residual wetness. When proper preparation is done, you can easily use adhesive and stick your fresh tiles straight onto the wall.

How to get ready for tiling a wall:.

  • Remove old fittings, such as pins, screws, rivets etc
  • Repair or eliminate unsuited plaster.
  • If present), get rid of or pre-treat wallpaper (.
  • Repair any fractures or indications of damage.
  • Level the surface.
  • Sand, so that the adhesive can bond.
  • Ensure the surface is dirt, dust and grease-free.
  • Select the appropriate primer for your type of surface area.

Other crucial preparation to do prior to you begin:

  • Measure your square video footage.
  • Find out the variety of tiles needed for the job.
  • Buy at least 10% more tiles in case of damage during the setup. If you’re about to install fragile patterns, you might wish to increase the total up to 20% or even 30% additional. There are no guarantees when it pertains to discovering the same batch, and even one that will closely resemble what you purchased, further down the line, so this is highly suggested.

Make certain you have the best kind of adhesive.

According to the expert tradespersons from Fantastic Tilers, less experienced Do It Yourself enthusiasts can utilize the ready-mix kind of adhesive, however an expert tiler will constantly apply the powdered service. It dries slower and hence enables you to much better change and align the entire wall tiling.

Valuable pointer: When tiling kitchen splashbacks or wet spaces, or setting up restroom tiles in general, adhesive should be waterproof.

Ensure the wall is level or your tile installation may not be successful.

Tiling an irregular wall has the possible to result in catastrophe. An easy method to identify irregularities is by positioning something long and flat (i.e. a routine slab) on the wall and moving it across. In this manner, you can identify any swollen locations or bumps, need to they exist.

An uneven wall can avoid adhesive from sticking– which could cause your entire wall installation to collapse. According to expert tilers, anything in between 3 and 6mm is still workable– however anything beyond that is likely to cause trouble.

Its grip may loosen up– leading to undesirable problems even more down the line if you choose to apply a slightly thicker layer of adhesive to compensate.

Various surface areas need various ways of preparation.

Some surfaces, such as a fresh drywall, need at least a month to correctly dry. Other cases, such as when you’re tiling on wood, require a coat of polyurethane paint. Make certain you have the right option for your specific wall and, whenever in doubt, speak with an expert tiler.

Tile board backers are a terrific way to deal with uneven surface areas with minimal effort.

Although slightly costlier, tile board backers can assist you solve the issue– not to mention that these items are resistant to moisture, and can successfully avoid mould (which is understood to grow on porous products in warm, wet conditions). This benefit makes tile backer boards an useful solution for restrooms, locations and showers surrounding the kitchen area sink.

The one downside of tile backer boards is that making use of such products will make your fresh tile installation a little bit more pricey.

Practical idea: One crucial thing to make certain of here is that the boards are sturdy and well-mounted.

Can you set up new tiles on top of old tiles?

Tiling over old tiles is possible– however it’s constantly much better to retile and eliminate.

The majority of tiles are too smooth for adhesive to appropriately bond and, in these cases, additional treatment is needed. Depending upon the toolkit you have at hand, you might either try a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, act with additional care so as not to damage the integrity of your old tiling.

Important: Always examine for void behind old tiles. To do this, just knock on each piece with your hand and listen out for hollow sounds. Locations with hollow space are easy to identify, however beware– if you stop working to spot these and tile over them anyway, you run the risk of having your fresh tiles collapse in the relatively future.

tiling tools

What tools will I require for a DIY tile setup?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Routine energy knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a comparable tool).
  • Pencil.
  • Measuring tape.
  • Drill.
  • Pins (to support the tile up until the adhesive bonds and dries off).
  • Level.

Important: Ensure your surface is always dust, dirt and moisture-free or there’s a chance your adhesive may not correctly bond.

For a lot of types of masonry, ceramic and vinyl tiles will stick– but for wood surface areas, you’ll need to apply a coat of paint or prime.

How do I prep drywall for a fresh tile setup?

Fresh drywall requires approximately a month prior to it’s ready for tiling, however when the time comes, you will not need to tape the joints. All you’ll require to do is use a skim coat and sand. Once done, tidy the surface from dust, dry any signs of wetness and apply the adhesive.

Crucial: For areas rich with wetness, usage waterproof plasterboard.

How do I prep old drywall for a fresh tile setup?

It’s essential to appropriately evaluate whether the wall is strong and stable adequate to hold the weight of fresh tiling. You should constantly ask for recommendations from a skilled tiler if you’re unsure.

Fill out any fractures or holes from pins, nails or any other type of wall fitting, use the primer, leave it to dry, sand one more time, and after that use the adhesive.

How do I prep the wall for tiles if the drywall is currently painted or textured?

According to specialists, you need to use PVA or make a Do It Yourself guide by adding a bit more water to your adhesive.

After that, there are a few important tasks to take care of:.

  • Get rid of depreciated paint.
  • Repair cracks and holes.
  • If bumps are present, sand.
  • Wipe the surface area.
  • Ensure there are no signs of oil or grease.

Valuable idea: Deal with the wall with Trisodium Phosphate (TSP). It’s an effective cleaning agent, stain cleaner and degreaser– but bear in mind that this should, of course, be kept well away from kids.

How do I prep a plywood surface for fresh tiling?

The fact is that plywood is suitable for tiling your floorings but not as useful when it pertains to walls. The material is made from compressed wood blended with various oils, which indicates that heat can impact it. If exposed to remarkable and frequent modifications in temperature level, tiles and grout will likely split.

How do I prep a wallpapered wall for tiling?

When it concerns walls, tiles use even more durability and practicality than wallpaper, and the very best choice is to get rid of wallpaper any place possible. The most problem-free and efficient way is by exposing the room to steam– but this method does include some dangers. If you’re treating drywall or crafted wood by means of steam, the high temperatures and wetness can possibly cause damage which is frequently beyond easy repair work.

Alternatively, you can just wipe the surface with a damp and warm rag. By doing this, wetness won’t penetrate through to the substrate itself– but at the same time, the wallpaper will relax. Repeat the treatment a few times and use a scraper to peel everything with minimal effort.

When done, all you’ll require to do prior to using guide or adhesive is to make sure the surface area is dry and tidy.

You can install new tiles on various surfaces, as long you prepare the wall properly. When appropriate preparation is done, you can easily apply adhesive and stick your fresh tiles straight onto the wall.

Areas with hollow area are simple to find, however beware– if you fail to identify these and tile over them anyhow, you run the risk of having your fresh tiles collapse in the reasonably near future.

The reality is that plywood is suitable for tiling your floors but not as useful when it comes to walls. When it comes to walls, tiles offer far more longevity and practicality than wallpaper, and the finest alternative is to eliminate wallpaper anywhere possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally unmodified in place in an array to cover roofs, floors, walls, edges, or further objects such as tabletops. Alternatively, tile can sometimes forward to similar units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In another sense, a tile is a construction tile or similar object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of afire clay.

Tiles are often used to form wall and floor coverings, and can range from simple square tiles to highbrow or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but additional materials are then commonly used, such as glass, cork, concrete and additional composite materials, and stone. Tiling stone is typically marble, onyx, granite or slate. Thinner tiles can be used upon walls than upon floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button