WHY CHOOSE ModernTiling
There are a number of tiling business in Dublin, but it’s always the most crucial to trust and pick. Your single click when searching for “local tilers near me” online or calling somebody over the phone can help you discover a tiler in Dublin. Picking the right tiling system in Dublin can be a complicated job.
We are a competent and certified tiling company in Dublin. Having several years of experience and knowledgeable business tilers in Dublin, we can mesmerize the appearance of your location with our beautiful ceramic tiles.
How to Prepare a Wall for Tiling (Step-by-Step + Top Tips)
Preparing your walls for a fresh wall tile installation is basic and hassle-free with our no-nonsense guide ready.
You can install new tiles on different surfaces, as long you prepare the wall appropriately. Simply ensure the surface area is level enough, and dust and dirt-free– which there are no indications of recurring moisture. When proper preparation is done, you can quickly use adhesive and stick your fresh tiles straight onto the wall.
How to prepare for tiling a wall:.
- Eliminate old fittings, such as pins, screws, rivets and so on
- Repair work or eliminate unsuited plaster.
- Get rid of or pre-treat wallpaper (if present).
- Repair any cracks or signs of damage.
- Level the surface area.
- Sand, so that the adhesive can bond.
- Ensure the surface area is dirt, grease-free and dust.
- Select the proper guide for your type of surface.
Other essential planning to do before you begin:
- Step your square footage.
- Find out the number of tiles required for the task.
- Buy at least 10% more tiles in case of damage during the installation. If you’re about to set up fragile patterns, you may wish to increase the total up to 20% or perhaps 30% additional. There are no warranties when it concerns finding the exact same batch, or perhaps one that will carefully resemble what you purchased, further down the line, so this is extremely advised.
Make sure you have the best type of adhesive.
According to the expert tradespersons from Wonderful Tilers, less experienced DIY enthusiasts can utilize the ready-mix kind of adhesive, however an expert tiler will constantly apply the powdered service. It dries slower and hence allows you to better change and align the whole wall tiling.
Helpful tip: When tiling kitchen area splashbacks or damp rooms, or installing bathroom tiles in general, adhesive need to be water-resistant.
Make certain the wall is level or your tile installation might not achieve success.
Tiling an irregular wall has the potential to lead to catastrophe. An easy method to identify abnormalities is by positioning something long and flat (i.e. a routine plank) on the wall and moving it across. By doing this, you can recognize any swollen areas or bumps, need to they exist.
An uneven wall can avoid adhesive from sticking– which could trigger your entire wall installation to collapse. According to expert tilers, anything between 3 and 6mm is still practical– but anything beyond that is likely to cause trouble.
Its grip may loosen up– leading to undesirable concerns even more down the line if you decide to use a slightly thicker layer of adhesive to compensate.
Different surface areas need various means of preparation.
Some surfaces, such as a fresh drywall, require a minimum of a month to properly dry. Other cases, such as when you’re tiling on wood, require a coat of polyurethane paint. Make sure you have the right service for your particular wall and, whenever in doubt, seek advice from an expert tiler.
Tile board backers are an excellent method to handle unequal surfaces with minimal effort.
Although somewhat more expensive, tile board backers can assist you solve the issue– not to mention that these products are resistant to moisture, and can effectively avoid mould (which is understood to grow on porous materials in warm, damp conditions). This benefit makes tile backer boards a practical option for areas, showers and bathrooms surrounding the kitchen sink.
The one downside of tile backer boards is that utilising such products will make your fresh tile setup a bit more expensive.
Helpful suggestion: One vital thing to ensure of here is that the boards are well-mounted and tough.
Can you install new tiles on top of old tiles?
Tiling over old tiles is possible– however it’s constantly much better to retile and get rid of.
The majority of tiles are too smooth for adhesive to properly bond and, in these cases, additional treatment is required. Depending upon the toolkit you have at hand, you could either attempt a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, act with additional care so as not to harm the stability of your old tiling.
Crucial: Always inspect for empty space behind old tiles. To do this, simply knock on each piece with your hand and listen out for hollow sounds. Locations with hollow area are simple to find, but beware– if you stop working to identify these and tile over them anyhow, you run the risk of having your fresh tiles collapse in the reasonably near future.
What tools will I require for a DIY tile installation?
- Paintbrush.
- Paint roller.
- Liquid waterproofing membranes (or plastic sheets).
- Regular energy knife.
- Stapler.
- Mask and protective glasses (to keep you safe from heavy particles).
- Gloves.
- Straight edge (or a comparable tool).
- Pencil.
- Determining tape.
- Drill.
- Pins (to support the tile up until the adhesive bonds and dries off).
- Level.
Crucial: Make certain your surface is constantly dust, dirt and moisture-free or there’s a chance your adhesive may not appropriately bond.
For a lot of kinds of masonry, ceramic and vinyl tiles will stick– but for wood surfaces, you’ll require to use a coat of paint or prime.
How do I prep drywall for a fresh tile setup?
Fresh drywall needs approximately a month before it’s ready for tiling, however when the time comes, you will not have to tape the joints. All you’ll require to do is use a skim coat and sand. As soon as done, tidy the surface area from dust, dry any signs of moisture and apply the adhesive.
Crucial: For areas rich with moisture, use waterproof plasterboard.
How do I prep old drywall for a fresh tile setup?
It’s crucial to appropriately evaluate whether the wall is steady and strong sufficient to hold the weight of fresh tiling. If you’re uncertain, you should constantly ask for suggestions from a knowledgeable tiler.
Fill in any fractures or holes from pins, nails or any other type of wall fitting, use the guide, leave it to dry, sand one more time, and after that apply the adhesive.
How do I prep the wall for tiles if the drywall is already painted or textured?
According to specialists, you must apply PVA or make a DIY guide by adding a bit more water to your adhesive.
After that, there are a couple of crucial tasks to take care of:.
- Eliminate depreciated paint.
- Repair cracks and holes.
- If bumps are present, sand.
- Clean the surface.
- Make certain there are no signs of oil or grease.
Helpful idea: Deal with the wall with Trisodium Phosphate (TSP). It’s an effective cleaning agent, stain cleaner and degreaser– but keep in mind that this should, obviously, be kept well away from kids.
How do I prep a plywood surface area for fresh tiling?
The reality is that plywood is suitable for tiling your floors but not as practical when it pertains to walls. The material is made from compressed wood combined with numerous oils, which indicates that heat can affect it. , if exposed to frequent and dramatic remarkable in temperature, tiles and modifications will temperature level crack.
How do I prep a wallpapered wall for tiling?
When it concerns walls, tiles use even more durability and usefulness than wallpaper, and the best alternative is to get rid of wallpaper anywhere possible. The most hassle-free and efficient method is by exposing the space to steam– however this approach does include some dangers. The high temperatures and moisture can possibly cause damage which is typically beyond simple repair if you’re treating drywall or engineered wood through steam.
You can merely clean the surface with a damp and warm rag. This way, moisture won’t permeate through to the substrate itself– however at the same time, the wallpaper will chill out. Repeat the treatment a few times and utilize a scraper to peel everything with minimal effort.
Once done, all you’ll require to do prior to using primer or adhesive is to ensure the surface area is dry and clean.
You can install brand-new tiles on numerous surface areas, as long you prepare the wall properly. When proper preparation is done, you can quickly apply adhesive and stick your fresh tiles straight onto the wall.
Locations with hollow area are simple to identify, but beware– if you fail to identify these and tile over them anyhow, you run the threat of having your fresh tiles collapse in the relatively near future.
The fact is that plywood is ideal for tiling your floors however not as useful when it comes to walls. When it comes to walls, tiles use far more longevity and functionality than wallpaper, and the finest option is to remove wallpaper any place possible.
Watch this video and learn how to tile kitchen wall
Tilers (WikiPedia)
Durable and versatile, tiles come in various shapes, such as thin squares or rectangles. They are made from materials like ceramic, stone, metal, clay, and glass. Tiles find widespread use in covering roofs, floors, walls, edges, and tabletops. Some lightweight options, like perlite, wood, and mineral wool, are suitable for walls and ceilings. Tiles also extend beyond traditional use, appearing as construction units or counters in tile-based games. The word “tile” originates from the French “tuile,” derived from the Latin “tegula,” which means a fired clay roof tile.
Tiles exhibit versatility in their applications for walls and floors, showcasing a range of designs that include simple squares and intricate mosaics. Ceramic tiles are often glazed for indoor use and left unglazed for roofing purposes. Additionally, materials like glass, cork, concrete, composites, and stone are commonly used in tile production. Stone tiles can be made from marbles, onyx, granite, and slate. While thinner tiles are suitable for walls, floors require sturdier surfaces that can handle impacts and wear.