WHY SELECT US

There are a number of tiling companies in Dublin, but it’s always the most essential to trust and choose. Your single click when searching for “local tilers near me” online or calling someone over the phone can help you find a tiler in Dublin. Selecting the best tiling system in Dublin can be a difficult task. The problem is who to call the Dublin tiling facilities. Do not think all of you blindly. Modern Tiling might be the ideal option for your tiling requires.

We are a competent and certified tiling agency in Dublin. Having a number of years of experience and proficient commercial tilers in Dublin, we can enthrall the look of your place with our beautiful ceramic tiles.

How to Prepare a Wall for Tiling (Detailed + Leading Tips).

tilers

Preparing your walls for a fresh wall tile installation is basic and hassle-free with our no-nonsense guide ready.

You can set up brand-new tiles on different surface areas, as long you prepare the wall properly. Just make sure the surface area is level enough, and dust and dirt-free– which there are no indications of residual moisture. When correct preparation is done, you can easily use adhesive and stick your fresh tiles straight onto the wall.

How to prepare for tiling a wall:.

  • Eliminate old fittings, such as pins, screws, rivets and so on
  • Repair or get rid of unfit plaster.
  • If present), get rid of or pre-treat wallpaper (.
  • Fix any cracks or indications of damage.
  • Level the surface.
  • Sand, so that the adhesive can bond.
  • Ensure the surface is dirt, grease-free and dust.
  • Select the suitable primer for your kind of surface area.

Other important preparation to do before you start:

  • Step your square video footage.
  • Find out the variety of tiles needed for the task.
  • Buy at least 10% more tiles in case of damage throughout the setup. If you will set up delicate patterns, you might wish to increase the amount to 20% or even 30% extra. There are no warranties when it pertains to finding the same batch, or perhaps one that will carefully resemble what you purchased, further down the line, so this is extremely suggested.

Make sure you have the ideal type of adhesive.

According to the professional tradespersons from Fantastic Tilers, less knowledgeable Do It Yourself enthusiasts can utilize the ready-mix type of adhesive, but an expert tiler will always apply the powdered service. It dries slower and thus allows you to better adjust and line up the entire wall tiling.

Practical idea: When tiling cooking area splashbacks or damp rooms, or setting up bathroom tiles in general, adhesive must be water-resistant.

Ensure the wall is level or your tile setup may not succeed.

Tiling an uneven wall has the possible to result in disaster. An easy method to spot abnormalities is by positioning something long and flat (i.e. a regular plank) on the wall and moving it throughout. In this manner, you can recognize any swollen locations or bumps, must they exist.

An irregular wall can prevent adhesive from sticking– which might cause your entire wall installation to collapse. According to professional tilers, anything in between 3 and 6mm is still practical– but anything beyond that is most likely to cause trouble.

If you decide to apply a slightly thicker layer of adhesive to compensate, its grip may loosen– resulting in unwanted concerns even more down the line.

Different surface areas need different methods of preparation.

Some surfaces, such as a fresh drywall, require at least a month to appropriately dry. Other cases, such as when you’re tiling on wood, need a coat of polyurethane paint. Ensure you have the right service for your particular wall and, whenever in doubt, speak with an expert tiler.

Tile board backers are a fantastic method to handle uneven surfaces with minimal effort.

Although a little costlier, tile board backers can help you fix the issue– not to mention that these items are resistant to wetness, and can effectively prevent mould (which is understood to grow on porous materials in warm, damp conditions). This benefit makes tile backer boards a practical solution for showers, restrooms and areas surrounding the kitchen area sink.

The one downside of tile backer boards is that making use of such products will make your fresh tile installation a little more expensive.

Valuable tip: One vital thing to make certain of here is that the boards are durable and well-mounted.

Can you install brand-new tiles on top of old tiles?

Tiling over old tiles is possible– but it’s constantly much better to retile and remove.

Many tiles are too smooth for adhesive to effectively bond and, in these cases, extra treatment is required. Depending on the toolkit you have at hand, you could either try a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, act with additional care so as not to damage the stability of your old tiling.

Essential: Constantly check for empty space behind old tiles. To do this, just knock on each piece with your hand and listen out for hollow noises. Locations with hollow area are easy to identify, however beware– if you stop working to identify these and tile over them anyhow, you run the risk of having your fresh tiles collapse in the reasonably future.

tiling tools

What tools will I require for a Do It Yourself tile setup?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Routine utility knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a comparable tool).
  • Pencil.
  • Determining tape.
  • Drill.
  • Pins (to support the tile until the adhesive bonds and dries off).
  • Level.

Crucial: Ensure your surface is constantly dust, dirt and moisture-free or there’s an opportunity your adhesive might not correctly bond.

For a lot of types of masonry, ceramic and vinyl tiles will stick– but for wooden surfaces, you’ll require to apply a coat of paint or prime.

How do I prep drywall for a fresh tile setup?

Fresh drywall requires approximately a month prior to it’s ready for tiling, however when the time comes, you won’t need to tape the joints. All you’ll need to do is use a skim coat and sand. When done, tidy the surface from dust, dry any signs of wetness and use the adhesive.

Important: For areas abundant with wetness, usage water-resistant plasterboard.

How do I prep old drywall for a fresh tile installation?

It’s important to effectively examine whether the wall is steady and strong adequate to hold the weight of fresh tiling. You should constantly ask for suggestions from an experienced tiler if you’re uncertain.

Fill out any fractures or holes from pins, nails or any other kind of wall fitting, use the primer, leave it to dry, sand one more time, and then apply the adhesive.

How do I prep the wall for tiles if the drywall is currently painted or textured?

According to experts, you need to use PVA or make a DIY primer by including a bit more water to your adhesive.

After that, there are a couple of crucial jobs to look after:.

  • Get rid of diminished paint.
  • Repair cracks and holes.
  • Sand if bumps are present.
  • Clean the surface area.
  • Make sure there are no signs of oil or grease.

Handy tip: Deal with the wall with Trisodium Phosphate (TSP). It’s an effective cleaning agent, stain remover and degreaser– however bear in mind that this should, obviously, be kept well away from children.

How do I prep a plywood surface area for fresh tiling?

When it comes to walls, the truth is that plywood is appropriate for tiling your floors however not as practical. The material is made from compressed wood combined with numerous oils, which indicates that heat can impact it. If exposed to frequent and significant changes in temperature, tiles and grout will likely split.

How do I prep a wallpapered wall for tiling?

When it pertains to walls, tiles provide even more longevity and functionality than wallpaper, and the very best alternative is to get rid of wallpaper any place possible. The most effective and hassle-free way is by exposing the room to steam– however this approach does feature some dangers. The high temperatures and wetness can potentially cause damage which is often beyond simple repair work if you’re treating drywall or crafted wood via steam.

You can just wipe the surface with a warm and damp rag. This way, moisture will not permeate through to the substrate itself– however at the same time, the wallpaper will relax. Repeat the treatment a couple of times and use a scraper to peel whatever with minimal effort.

When done, all you’ll require to do prior to applying primer or adhesive is to make sure the surface area is dry and tidy.

You can install brand-new tiles on numerous surfaces, as long you prepare the wall appropriately. When appropriate preparation is done, you can easily apply adhesive and stick your fresh tiles straight onto the wall.

Areas with hollow space are simple to find, however beware– if you fail to identify these and tile over them anyhow, you run the risk of having your fresh tiles collapse in the relatively near future.

The truth is that plywood is ideal for tiling your floors however not as practical when it comes to walls. When it comes to walls, tiles use far more durability and usefulness than wallpaper, and the finest option is to get rid of wallpaper any place possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally unadulterated in place in an array to lid roofs, floors, walls, edges, or additional objects such as tabletops. Alternatively, tile can sometimes direct to same units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In unconventional sense, a tile is a construction tile or thesame object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of ablaze clay.

Tiles are often used to form wall and floor coverings, and can range from simple square tiles to complex or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but other materials are furthermore commonly used, such as glass, cork, concrete and other composite materials, and stone. Tiling rock is typically marble, onyx, granite or slate. Thinner tiles can be used on walls than on floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button