WHY CHOOSE ModernTiling

There are a number of tiling business in Dublin, however it’s always the most crucial to trust and choose. Your single click when looking for “local tilers near me” online or calling somebody over the phone can assist you find a tiler in Dublin. Yet picking the ideal tiling system in Dublin can be an overwhelming task. The problem is who to call the Dublin tiling facilities. Do not believe all of you blindly. Modern Tiling might be the perfect option for your tiling needs.

We are a licensed and qualified tiling agency in Dublin. Having a number of years of experience and proficient business tilers in Dublin, we can enthrall the look of your location with our beautiful ceramic tiles.

How to Prepare a Wall for Tiling (Leading + step-by-step Tips).


Preparing your walls for a fresh wall tile installation is hassle-free and simple with our no-nonsense guide at the ready.

You can set up new tiles on different surface areas, as long you prepare the wall appropriately. Just make certain the surface area is level enough, and dust and dirt-free– which there are no signs of recurring moisture. When correct preparation is done, you can quickly use adhesive and stick your fresh tiles straight onto the wall.

How to get ready for tiling a wall:.

  • Remove old fittings, such as pins, screws, rivets etc
  • Repair or remove unfit plaster.
  • If present), get rid of or pre-treat wallpaper (.
  • Fix any fractures or signs of damage.
  • Level the surface area.
  • Sand, so that the adhesive can bond.
  • Ensure the surface area is dust, grease-free and dirt.
  • Select the appropriate primer for your type of surface area.

Other essential preparation to do prior to you get started:

  • Measure your square video.
  • Find out the number of tiles required for the job.
  • Purchase least 10% more tiles in case of breakage during the setup. If you will install delicate patterns, you might wish to increase the total up to 20% and even 30% additional. There are no warranties when it concerns finding the exact same batch, and even one that will carefully resemble what you purchased, even more down the line, so this is highly advised.

Make sure you have the right type of adhesive.

According to the expert tradespersons from Wonderful Tilers, less skilled Do It Yourself enthusiasts can utilize the ready-mix type of adhesive, however a professional tiler will constantly use the powdered solution. It dries slower and hence permits you to better adjust and line up the whole wall tiling.

Practical pointer: When tiling kitchen area splashbacks or wet rooms, or setting up restroom tiles in general, adhesive must be waterproof.

Make sure the wall is level or your tile setup might not succeed.

Tiling an unequal wall has the prospective to lead to disaster. A simple method to find abnormalities is by positioning something long and flat (i.e. a regular slab) on the wall and sliding it across. By doing this, you can identify any swollen locations or bumps, need to they exist.

An unequal wall can avoid adhesive from sticking– which could trigger your entire wall setup to collapse. According to expert tilers, anything between 3 and 6mm is still convenient– but anything beyond that is most likely to cause trouble.

Its grip may loosen– leading to unwanted concerns even more down the line if you decide to use a somewhat thicker layer of adhesive to compensate.

Various surface areas need different ways of preparation.

Some surface areas, such as a fresh drywall, need at least a month to effectively dry. Other cases, such as when you’re tiling on wood, need a coat of polyurethane paint. Make certain you have the ideal option for your specific wall and, whenever in doubt, seek advice from an expert tiler.

Tile board backers are a terrific way to manage uneven surface areas with very little effort.

Although somewhat pricier, tile board backers can assist you fix the problem– not to mention that these items are resistant to wetness, and can effectively avoid mould (which is understood to grow on porous products in warm, damp conditions). This benefit makes tile backer boards an useful option for restrooms, showers and areas surrounding the kitchen sink.

The one disadvantage of tile backer boards is that utilising such products will make your fresh tile installation a bit more pricey.

Practical pointer: One important thing to make certain of here is that the boards are tough and well-mounted.

Can you install new tiles on top of old tiles?

Tiling over old tiles is possible– however it’s constantly much better to remove and retile.

Many tiles are too smooth for adhesive to correctly bond and, in these cases, additional treatment is required. Depending on the toolkit you have at hand, you could either attempt a sander (with medium to coarse sandpaper) or a grinding disc. You should, however, show additional caution so as not to harm the stability of your old tiling.

Important: Constantly inspect for empty space behind old tiles. To do this, simply knock on each piece with your hand and listen out for hollow sounds. Areas with hollow space are easy to identify, however beware– if you stop working to find these and tile over them anyway, you risk of having your fresh tiles collapse in the relatively future.

tiling tools

What tools will I need for a Do It Yourself tile setup?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Regular energy knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a similar tool).
  • Pencil.
  • Determining tape.
  • Drill.
  • Pins (to support the tile until the adhesive bonds and dries off).
  • Level.

Crucial: Make sure your surface area is always dust, dirt and moisture-free or there’s a possibility your adhesive might not effectively bond.

For a lot of types of masonry, ceramic and vinyl tiles will stick– but for wood surfaces, you’ll require to use a coat of paint or prime.

How do I prep drywall for a fresh tile setup?

Fresh drywall needs up to a month before it’s ready for tiling, but when the time comes, you won’t have to tape the joints. All you’ll require to do is use a skim coat and sand. As soon as done, clean the surface from dust, dry any signs of wetness and use the adhesive.

Important: For locations rich with wetness, use waterproof plasterboard.

How do I prep old drywall for a fresh tile installation?

It’s important to appropriately examine whether the wall is steady and strong enough to hold the weight of fresh tiling. If you’re uncertain, you ought to always request for recommendations from a knowledgeable tiler.

Complete any cracks or holes from pins, nails or any other kind of wall fitting, use the guide, leave it to dry, sand one more time, and then use the adhesive.

How do I prep the wall for tiles if the drywall is already painted or textured?

According to specialists, you should apply PVA or make a DIY guide by including a bit more water to your adhesive.

After that, there are a couple of essential jobs to look after:.

  • Remove depreciated paint.
  • Repair cracks and holes.
  • If bumps are present, sand.
  • Wipe the surface area.
  • Ensure there are no indications of oil or grease.

Valuable pointer: Treat the wall with Trisodium Phosphate (TSP). It’s a powerful cleaner, stain cleaner and degreaser– however bear in mind that this should, naturally, be kept well away from kids.

How do I prep a plywood surface area for fresh tiling?

The reality is that plywood is suitable for tiling your floorings however not as useful when it comes to walls. The material is made of compressed wood blended with numerous oils, which implies that heat can affect it. If exposed to frequent and significant changes in temperature, tiles and grout will likely break.

How do I prep a wallpapered wall for tiling?

When it concerns walls, tiles use much more longevity and usefulness than wallpaper, and the very best choice is to get rid of wallpaper anywhere possible. The most efficient and hassle-free method is by exposing the room to steam– however this method does feature some risks. If you’re dealing with drywall or crafted wood via steam, the high temperatures and wetness can potentially cause damage which is frequently beyond basic repair work.

Alternatively, you can merely clean the surface with a warm and wet rag. By doing this, wetness won’t permeate through to the substrate itself– however at the same time, the wallpaper will loosen up. Repeat the procedure a couple of times and use a scraper to peel whatever with very little effort.

Once done, all you’ll need to do prior to applying guide or adhesive is to make certain the surface area is clean and dry.

You can set up new tiles on numerous surfaces, as long you prepare the wall appropriately. When correct preparation is done, you can quickly use adhesive and stick your fresh tiles straight onto the wall.

Areas with hollow space are easy to spot, but beware– if you stop working to find these and tile over them anyhow, you run the threat of having your fresh tiles collapse in the fairly near future.

The reality is that plywood is ideal for tiling your floors but not as useful when it comes to walls. When it comes to walls, tiles use far more longevity and functionality than wallpaper, and the finest alternative is to get rid of wallpaper any place possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally truth in place in an array to cover roofs, floors, walls, edges, or new objects such as tabletops. Alternatively, tile can sometimes take up to thesame units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In different sense, a tile is a construction tile or similar object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of burning clay.

Tiles are often used to form wall and floor coverings, and can range from simple square tiles to obscure or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but additional materials are afterward commonly used, such as glass, cork, concrete and additional composite materials, and stone. Tiling rock is typically marble, onyx, granite or slate. Thinner tiles can be used on walls than upon floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button