Developed in 2000, we’re amongst the leading tilers in Dublin. Consistency and quality are at the core of whatever we do, allowing us to become among the most trustworthy tiling companies in Dublin.

With years of tiling experience, our vibrant group have satisfied essentially every tiling demand possible, developing enduring relationships with a host of clients & suppliers and crafting a service unlike any tiling business in Dublin. From minor works to large-scale jobs, we place consumer satisfaction and efficiency above all else, guaranteeing we deliver on-time, in spending plan and to a high standard.

How to tile a wall

 

Develop a sensational wall with appealing, durable and useful wall tiles

tiler dublin
Tiling is a skilled job but we’re here to assist you get the very best surface to your wall tiles. Whether you’re tiling a whole restroom, a shower cubicle, a splashback in a kitchen or a little section around a fireplace, our recommendations will assist you attain a terrific result.
Before you begin, it is necessary to prepare your tiling. Computing the number of tiles & adhesive you require, preparing the wall and preparing out the position of the tiles are all necessary factors. Our guide to preparing your wall tiles covers all you require to know before tiling.
This guide will stroll you through how to lay the tiles. In our example we’re tiling a whole wall with square tiles in a linear tiling style. We’ll explain how to:

  • Repair whole tiles to a wall
  • Cut tiles for corners and barriers and apply corner tile trim
  • Grout and finish wall tiles
  • Seal around the edges of tiling

tiling

Tools & Products

 

Products

 

  • Wall tiles
  • Filler – if you have any holes in the wall that require filling. If the hole in the wall is larger than the size of your fist, we advise getting a professional to make the repair.
  • Tile adhesive – we suggest ready-mixed tile adhesive to save time
  • Tile spacers
  • Sanitary sealant – we suggest anti-mould sealant for a finish that lasts
  • Grout – we recommend ready-mixed grout
  • Multi-purpose fabrics
  • Tile trim – as required.

 

Tools

 

  • Guideline
  • Tape measure
  • Chinagraph pencil or felt-tip pen – if required, to mark tiles for cutting
  • Trowel
  • Notched trowel (also called a notched spreader).
  • Tile cutter.
  • Tile file – if needed.
  • Hacksaw – if needed, to cut the tile trim.
  • Grout spreader (likewise known as a grout float).
  • Grout finisher (likewise known as a grout shaper).
  • Claw hammer.
  • Sponge.
  • Bucket.
  • Spirit level.
  • Cartridge weapon – if needed. Some sealant comes as a trigger weapon and doesn’t need a cartridge gun. Examine the product guidelines for the sealant.
  • Sealant smoother.

 

Safety kit.

 

  • Safety gloves.
  • Dust mask.

 

 

Safety first.

 

  • When cutting tiles, wear security goggles and a dust mask to secure you from flying fragments and sharp edges.

 

How to tile a whole wall.

When you’ve planned the tiles, prepared the wall and fixed your timber battens, lay whole tiles first by following these steps.

wall tiling step 1

 

Action 1.

Scoop up some tile adhesive with the trowel and press it onto the wall, starting in the corner formed by the timber battens. Spread it with the notched trowel, working away from the corner with horizontal strokes. Hold the edge of the notched trowel at an angle of about 45 °. The ridges in the adhesive will make sure there’s an equivalent amount behind each tile, making it simpler to get them all level. Attempt not to deal with more than one square metre at a time, as the adhesive could begin hardening before you’ve put all the tiles in place.
Pick a suitable tile adhesive for your tiles: for ceramic tiles use a ready-mixed tile adhesive or powder adhesive and a powder tile adhesive for porcelain tiles.
Apply adhesive to the wall and also on the back of the tiles if your tiles are bigger than 20 x 20.

 

Action 2.

Position your first tile into the corner, pressing its edges against the corners and the whole tile strongly versus the wall. Include a tile above it and one next to the initial tile pressing them strongly into the adhesive using a twisting action.
Wipe off any adhesive from the tiles with a wet sponge as you go– if you let it dry it’ll be extremely difficult to remove.
Leading pointer – using mosaic tiles.
When applying mosaic tiles to the wall, hold a piece of board over the tiles while the adhesive is wet and tap the board gently with a rubber mallet. This will offer the tiles a flat, even end up.
Some mosaics are set at various heights, in which case you must use your hand to ensure they’re all individually bedded into the adhesive.

Step 3.

Put tile spacers into the corners in between the tiles and change the tile positions as and when required. Press them in securely and place them flush versus the wall so you can grout over them.

Step 4.

Add another tile above the last one you applied, and another beside it. Continue using the whole tiles in this way till you’ve tiled the location covered with tile adhesive.
Apply another square metre of adhesive and tiles up until you have repaired all the whole tiles.
At the edges of the wall, put one leg of the spacer between the tiles so the rest is standing out– we’ll eliminate this later prior to grouting.

Step 5.

Leave to dry for the length of time directed on the tile adhesive guidelines.

Action 6.

Remove the vertical lumber batten by prising out it’s nails with the claw of a hammer.

Step 7.

Fix whole tiles to the other area of the wall, starting from the corner beside the tiles you’ve already fixed.

Step 8.

Once all the entire tiles have been fixed and are dry, get rid of the horizontal timber batten.
Now you have actually fixed all of the entire tiles, you’re ready to fill the edges and corners of the wall. Head to ‘How to tile corners’ to learn how to do this.

How to tile corners.

In this area, we’ll talk you through tiling corners. There are 2 kinds of corner– external and internal. These could be corners produced by walls or corners developed by blockages:.

Internal corner.

The corner sign up with in between 2 walls, for example the corner of a space, or the corner created by a door frame.

External corner.

Outward-facing corner that protrudes into the room, for instance the corner of a function wall or the edge of a window recess.
There’s a various approach for tiling depending upon the type of corner, and we’ll discuss both methods in this area.
Sometimes you may discover that you can fit entire tiles throughout the wall without requiring to cut a tile for the corner. If no cuts are necessary, dive to the area ‘How to grout and complete wall tiles’.
You’ll require to cut a tile to fit into the corner.

How to measure and mark tiles for cutting.

There are two methods to mark a tile and measure for cutting:.

Option 1.

Hold the tile you’ll be cutting over the last entire tile in the row. Fit another against the wall and mark where it overlaps the one below with a tile scribe, chinagraph pencil or felt-tip pen.

Alternative 2.

Take separate measurements at the top and bottom of the area you’re going to fill utilizing a tape measure. Mark the measurements at the top and bottom of the tile. Line up the square with the two marks and draw the line in between them with a pencil or felt-tip pen, providing you a vertical line to cut along.
With the marks made, it’s time to cut the tiles. Head to our How to cut tiles short article for suggestions on this.

Action 1.

After you have actually cut the tile, check to see that it fits. If you require to make any little adjustments use a tile file.
You don’t have to be totally accurate as the edges will be hidden by the tiles on the other wall if you’re also going to tile the adjacent wall.

How to tile internal corners.

 

Action 1.

After you’ve cut the tile, check to see that it fits. , if you require to make any little changes use a tile file.. You do not have to be totally precise as the edges will be concealed by the tiles on the other wall if you’re also going to tile the surrounding wall.

Action 2.

Utilize the narrow end of a notched spreader to put adhesive on the back of the cut tile. Then press it into location so it’s level with the nearby tile. Usage spacers if you need to.

Action 3.

If you’re tiling more than one wall, proceed to the next wall. If not, you’re ready to start grouting and finishing the tiles. For suggestions on this, dive to our section ‘How to grout and finish wall tiles’.

How to tile external corners.

Use tile trims to get a cool finish on external corners. It likewise helps to secure the edges of the tiles from knocks, which might chip them. The trim comes in a range of materials, colours, sizes and shapes. Here we’re using white 1/4 inch external edge tile trim.

Action 1.

End up tiling your very first wall.

Action 2.

Utilize a measuring tape to determine the length of the edge that you’ll be fixing the tile trim to.

Step 3.

Measure the tile trim to the same size and make a mark on it to show where to cut. Utilize a hacksaw to cut the tile trim to the length you require.

Step 4.

Include a narrow strip of tile adhesive to the untiled wall using the notched trowel and press the trim into it.

Step 5.

Line the trim up with the tiles of your first wall. Put 2 spacers in between the trim and each tile (one near the top of the tile and one near the bottom) to make sure there’s a gap for grout.

Action 6.

Put more tile adhesive on the untitled wall with the notched trowel. Add the adhesive vertically from top to bottom to avoid knocking the tile cut out of place with the teeth of the notched trowel.

Step 7.

Start tiling your 2nd wall, working away from the corner trim. As you set the tiles in place, keep in mind to allow a narrow grouting gap between them and the trim. Place spacers and change the tiles as you go, so the space remains the very same and the trim stays in location.

How to end up and grout wall tiles.

When the tiles are fixed in place and the adhesive has dried, it’s time to apply the grout.

Action 1.

Get rid of the protruding tile spacers at the edges of the wall and at corners.

Step 2.

Starting in the bottom left corner, press a small amount of grout onto the face of the tiles with a trowel.
Use a grout spreader, likewise called a grout float, to spread it, making long, diagonal strokes and working it into the joints between tiles. Continue up until you’ve grouted all the joints. The grout will soon start to solidify, so do this as fast as you can.
If you’re grouting a large location, divided it into areas and grout an area at a time. This is to avoid the grout hardening excessive whilst you complete grouting the whole area.

Step 3.

Instantly after you complete using the grout, discuss the tiles with a moist sponge (however not too wet as this may trigger discolouration) to remove any excess. Take care not to drag any grout from the joints.

Step 4.

Leave the grout to dry. As it does, you’ll notice a powdery film appear on the tiles from all the sponging. Clean this off with a soft, tidy fabric.

How to seal around the edge of tiling.

Sealing around the edge of tiling is important to stop water getting behind the tiles, especially around worktops, basins and kitchen sinks. Water behind tiles can cause damage to the wall, fittings and components. We’ll talk you through sealing the edge of tiling with sanitary sealant.

Step 1.

Attach the nozzle to the sealant and cut off the pointer, as directed by the product directions. If needed, put the sealant into the cartridge gun.

Action 2.

Run a constant bead of sealant, working from one end of the tiled area to the other, from delegated right. When you’re doing this, attempt to keep a constant pressure on the trigger of the weapon and a consistent speed.

Action 3.

Smooth any irregularities in the shape of the bead with a sealant smoother (or a wet finger), however take care not to pull the sealant from the surface.

Step 4.

 

Leave the sealant to dry.

Calculating the number of tiles & adhesive you need, preparing the wall and planning out the position of the tiles are all vital factors. Our guide to preparing your wall tiles covers all you need to understand prior to tiling.

In our example we’re tiling a whole wall with square tiles in a direct tiling design. If you’re also going to tile the nearby wall, you do not have to be completely precise as the edges will be hidden by the tiles on the other wall.
Start tiling your 2nd wall, working away from the corner trim.

Modern Tiling Videos

 

 

Learn More About Tiling

 

 

Related Articles

 

 

Modern Tiling Services

 

 

Around the Web

 

Call Now Button