WHY PICK ModernTiling.ie
There are numerous tiling companies in Dublin, but it’s constantly the most essential to trust and select. Your single click when looking for local tiler near me online or calling somebody over the phone can help you discover a tiler in Dublin. Yet selecting the ideal tiling system in Dublin can be a challenging task. The issue is who to contact the Dublin tiling centres. Do not believe all of you blindly. Modern Tiling may be the best option for your tiling requirements.
We are a certified and certified tiling company in Dublin. Having numerous years of experience and knowledgeable business tilers in Dublin, we can enthral the appearance of your place with our beautiful ceramic tiles.
How to Prepare a Wall for Tiling (Leading + detailed Tips).
Preparing your walls for a fresh wall tile setup is problem-free and simple with our no-nonsense guide ready.
You can set up brand-new tiles on various surfaces, as long as you prepare the wall properly. Simply make sure the surface area is level enough, and dust and dirt-free– where there are no signs of residual moisture. When correct preparation is done, you can quickly apply adhesive and stick your fresh tiles straight onto the wall.
How to prepare for tiling a wall:
- Get rid of old fittings, such as pins, screws, rivets etc
- Repair work or get rid of unfit plaster.
- If present, get rid of or pre-treat wallpaper.
- Repair any cracks or signs of damage.
- Level the surface area.
- Sand, so that the adhesive can bond.
- Make certain the surface is dust, grease-free and dirt.
- Choose the suitable primer for your type of surface.
Other important planning to do prior to you start:
- Step your square video.
- Determine the variety of tiles needed for the task.
- Purchase at least 10% more tiles. That’s done in case of breakage during the setup. If you’re about to set up delicate patterns, you may wish to increase the total up to 20% or even 30% additional. There are no assurances when it concerns discovering the exact same batch, and even one that will closely resemble what you purchased, further down the line, so this is highly suggested.
Ensure you have the best type of adhesive.
According to the professional tradesmen from Wonderful Tilers, less skilled DIY enthusiasts can use the ready-mix kind of adhesive, but a professional tiler will constantly apply the powdered solution. It dries slower and therefore enables you to better adjust and line up the whole wall tiling.
Useful tip: When tiling kitchen splashbacks or wet spaces, or installing bathroom tiles in general, adhesive needs to be water-resistant.
Ensure the wall is level or your tile setup might not achieve success.
Tiling an irregular wall has the prospect of resulting in catastrophe. An easy method to find irregularities is by putting something long and flat (i.e. a routine plank) on the wall and moving it across. By doing this, you can identify any swollen locations or bumps, ought to they exist.
If your wall is uneven, it can create a problem for adhesive to adhere properly. This can result in the collapse of your entire wall installation. Tilers who are experienced recommend that anything within the range of 3 to 6mm can still be managed, but anything exceeding that is likely to cause issues.
If you decide to apply a slightly thicker layer of adhesive to compensate, its grip might loosen– resulting in undesirable issues further down the line.
Different surface areas require different methods of preparation.
Some surface areas, such as a fresh drywall, need a minimum of a month to correctly dry. Other cases, such as when you’re tiling on wood, need a coat of polyurethane paint. Make sure you have the best option for your particular wall. Talk to an expert tiler whenever in doubt.
Tile board backers are an excellent way to handle unequal surface areas with minimal effort.
A little costlier, tile board backers can assist you solve the issue– not to mention that these items are resistant to wetness, and can successfully prevent mould (which is understood to grow on permeable products in warm, wet conditions). This benefit makes tile backer boards a practical option for bathrooms, showers and locations surrounding the kitchen sink.
The one disadvantage of tile backer boards is that making use of such products will make your fresh tile setup a little bit more costly.
Practical suggestion: One vital thing to make certain of here is that the boards are well-mounted and strong.
Can you set up brand-new tiles on top of old tiles?
Tiling over old tiles is possible– however it’s always much better to eliminate and retile.
The majority of tiles are too smooth for adhesive to correctly bond and, in these cases, additional treatment is needed. Depending on the toolkit you have at hand, you might either attempt a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, show extra caution so as not to damage the integrity of your old tiling.
Essential: Always examine the void behind old tiles. To do this, simply knock on each piece with your hand and listen out for hollow noises. Areas with hollow space are simple to find, however beware– if you stop working to find these and tile over them anyhow, you risk having your fresh tiles collapse in the fairly near future.
What tools do I need for a DIY tile installation?
- Paintbrush.
- Paint roller.
- Liquid waterproofing membranes (or plastic sheets).
- Regular utility knife.
- Stapler.
- Mask and protective glasses (to keep you safe from heavy particles).
- Gloves.
- Straight edge (or a comparable tool).
- Pencil.
- Determining tape.
- Drill.
- Pins (to support the tile up until the adhesive bonds and dries off).
- Level.
Crucial: Ensure your surface area is constantly dust, dirt and moisture-free or there’s a chance your adhesive may not effectively bond.
While ceramic and vinyl tiles are suitable for most masonry surfaces, wood surfaces require a layer of paint or primer before installation to ensure proper adherence.
How do I prep drywall for a fresh tile installation?
Before you can tile, newly installed drywall requires about a month to fully dry. However, once this time has passed, taping the joints is unnecessary. Instead, a simple application of skim coat and sanding will suffice. Once done, tidy the surface from dust, dry any indications of wetness and apply the adhesive.
Essential: For locations abundant with wetness, use waterproof plasterboard.
How do I prep old drywall for a fresh tile setup?
It’s vital to appropriately evaluate whether the wall is steady and strong enough to hold the weight of fresh tiling. If you’re uncertain, you ought to always request guidance from an experienced tiler.
Before applying adhesive, it is important to take care of any cracks or holes left by pins, nails, or other wall fittings. Fill them up diligently, then proceed to apply primer. Allow the primer to dry completely before moving forward. Once dry, give it a final sanding before moving on to the adhesive application.
How do I prep the wall for tiles if the drywall is already painted or textured?
According to professionals, you ought to use PVA or make a Do It Yourself primer by including a bit more water to your adhesive.
After that, there are a few essential tasks to look after:.
- Remove depreciated paint.
- Repair fractures and holes.
- Sand if bumps exist.
- Wipe the surface.
- Make certain there are no signs of oil or grease.
Valuable tip: Deal with the wall with Trisodium Phosphate (TSP). It’s an effective cleaning agent, stain cleaner and degreaser– but keep in mind that this should, obviously, be kept well away from children.
How do I prep a plywood surface area for fresh tiling?
When it comes to walls, the reality is that plywood is ideal for tiling your floors however not as practical. The material is made of compressed wood mixed with different oils, which means that heat can impact it. , if exposed to frequent and dramatic remarkable temperatures, tiles and modifications will crack.
How do I prep a wallpapered wall for tiling?
Tiles surpass wallpaper in terms of durability and functionality when it comes to walls, making it advisable to avoid using wallpaper whenever feasible. The most problem-free and efficient way is by exposing the room to steam– however this technique does include some dangers. If you’re treating drywall or crafted wood through steam, the high temperatures and wetness can potentially cause damage which is typically beyond simple repair work.
You can simply clean the surface area with a warm and wet rag. By doing this, moisture will not penetrate through to the substrate itself– however at the same time, the wallpaper will chill out. Repeat the treatment a couple of times and utilise a scraper to peel everything with very little effort.
When your task is complete, simply ensure that the surface is clean and dry before proceeding to apply primer or adhesive.
You can install brand-new tiles on numerous surfaces, as long as you prepare the wall properly. After proper preparation, the process of adhering and affixing new tiles directly onto the wall becomes a simple task.
Areas with hollow space are simple to identify, however beware– if you stop working to spot these and tile over them anyhow, you run the threat of having your fresh tiles collapse in the reasonably near future.
The truth is that plywood is appropriate for tiling your floors but not as practical when it comes to walls. When it comes to walls, tiles use far more durability and practicality than wallpaper, and the finest option is to remove wallpaper wherever possible.
Watch this video and learn how to tile kitchen wall
Tilers (WikiPedia)
Tiles come in various shapes, such as thin squares or rectangles, and are made from durable materials like ceramic, stone, metal, clay, and even glass. They serve the purpose of covering roofs, floors, walls, edges, and other objects like tabletops. On the other hand, for wall and ceiling applications, you can opt for lightweight tiles constructed from perlite, wood, or mineral wool. These materials are commonly utilised and offer a reduced weight alternative. In a different context, a tile could refer to a construction tile or a similar object used in games as counters (known as tile-based games). The word “tile” originated from the French term “tuile,” which traces back to the Latin word “tegula” meaning a fired clay roof tile.
Tiles have many applications, including creating coverings for walls and floors. They range from simple square tiles to intricate mosaics that showcase artistic designs. Ceramic tiles are frequently used and can be glazed for interior purposes or left unglazed for roofing needs. However, other materials like glass, cork, concrete, composite materials, and stone are also commonly utilised. Stone tiles often consist of marble, onyx, granite, or slate. Thinner tiles work well for walls, while floors require sturdier surfaces that can withstand impacts.