Invite to Modern Tiling. Developed in 2000, we’re amongst the leading tilers in Dublin. With decades of experience, we specialise in providing high-quality residential tiling & commercial tiling services across Dublin. Consistency and quality are at the core of everything we do, allowing us to end up being amongst the most reputable tiling business in Dublin.

With years of tiling experience, our dynamic team have fulfilled essentially every tiling request you can possibly imagine, constructing lasting relationships with a host of clients & providers and crafting a service unlike any tiling business in Dublin. From small works to massive tasks, we position consumer complete satisfaction and effectiveness above all else, ensuring we provide on-time, in budget plan and to a high standard.

Easy Do It Yourself Tiling Tips for Amateurs

tilers dublin

Including tile to your house is a great method to update the look of a space. Whether you are tiling an entryway floor, adding a little color to your kitchen with a backsplash, or taking on a total bathroom restoration, installing the tile yourself is absolutely nothing to be afraid of. With the right tools and a thoroughly laid-out strategy, you’ll be surprised at what you can achieve. Simply follow these easy actions for a do-it-yourself tiling task you make sure to like.

  1. First, you’ll need to understand just how much tile you’ll require, so carefully determine your space and identify the square video. Because tiles come in various sizes, the general square footage is necessary to acquiring the correct amount. Order an extra ten percent to account for any mistakes or cuts.
  2. For best results, set up backer-board (water resistant if it’s in a restroom) to the surface area that you will be tiling; it supplies a smooth, even surface for better tile adhesion. Utilize a light coat of glue or tile adhesive (ask your tile provider whether mastic or mortar will work best for you) and screws to affix it to the walls. If you are tiling a flooring, roll out a waterproof underlay (offered in the house improvement stores) to cover the entire location that will be tiled.
  3. Find the center of the location to be tiled and, utilizing a level, draw one line horizontally and one line vertically to create quadrants of the area you’re tiling.
  4. As soon as you have your tile style determined (try to prevent a lot of cuts and understand keeping the style focused), start at the center of the area you marked, and spread the tile adhesive onto the backer-board into among the quadrants in ten-square-foot sections utilizing a notched trowel. Continue to spread the adhesive up until it is even and the notches appear as they assist the tile follow the wall.
  5. At the center point of the quadrant, begin laying the tiles horizontally, using mild pressure to press the tiles into the adhesive. Continue adding adhesive and tiles, working towards the outer edge of the tile location.
  6. For tile pieces that are too huge, utilize a snap cutter or damp saw to make straight cuts. If a tile requires to be notched or have a centerpiece cut out to accommodate an outlet, use a damp saw, bewaring not to cut beyond the needed opening.
  7. Next, utilizing a trowel, apply the grout to the tile, working from one corner to the opposite side of the space. Be sure to apply the grout freely and evenly, making sure that it actually fills in the gaps between all of the tiles.
  8. Permit the grout to dry for 30 minutes. When dry, get rid of the excess grout with a clean sponge.
  9. For best outcomes, apply a tile sealant to prevent the grout from being stained or becoming subject to moisture.

Utilize a light coat of glue or tile adhesive (ask your tile supplier whether mastic or mortar will work best for you) and screws to affix it to the walls. If you are tiling a flooring, roll out a waterproof underlay (readily available at house improvement stores) to cover the whole area that will be tiled.
Once you have your tile design figured out (attempt to avoid too many cuts and be conscious of keeping the design focused), begin at the center of the area you marked, and spread the tile adhesive onto the backer-board into one of the quadrants in ten-square-foot areas using a notched trowel. At the center point of the quadrant, start laying the tiles horizontally, using mild pressure to push the tiles into the adhesive. Continue including adhesive and tiles, working toward the outer edge of the tile location.

Modern Tiling Videos

 

 

Learn More About Tiling

 

 

Related Articles

 

 

Modern Tiling Services

 

 

Around the Web

 

Call Now Button