WHY SELECT ModernTiling

There are several tiling business in Dublin, but it’s constantly the most important to trust and pick. Your single click when searching for “local tilers near me” online or calling somebody over the phone can assist you discover a tiler in Dublin. Choosing the best tiling system in Dublin can be a challenging task.

We are a certified and certified tiling firm in Dublin. Having several years of experience and proficient commercial tilers in Dublin, we can enthrall the appearance of your location with our gorgeous ceramic tiles.

How to Prepare a Wall for Tiling (Top + step-by-step Tips).


Preparing your walls for a fresh wall tile installation is problem-free and easy with our no-nonsense guide ready.

You can set up brand-new tiles on different surface areas, as long you prepare the wall appropriately. Simply make sure the surface is level enough, and dust and dirt-free– and that there are no signs of recurring wetness. When proper preparation is done, you can quickly apply adhesive and stick your fresh tiles straight onto the wall.

How to prepare for tiling a wall:.

  • Eliminate old fittings, such as pins, screws, rivets etc
  • Repair or eliminate unsuited plaster.
  • Get rid of or pre-treat wallpaper (if present).
  • Fix any cracks or indications of damage.
  • Level the surface.
  • Sand, so that the adhesive can bond.
  • Ensure the surface is dust, grease-free and dirt.
  • Select the suitable guide for your kind of surface area.

Other essential preparation to do prior to you get going:

  • Step your square footage.
  • Determine the number of tiles needed for the job.
  • Buy at least 10% more tiles in case of breakage throughout the setup. You might wish to increase the amount to 20% or even 30% extra if you’re about to set up fragile patterns. There are no guarantees when it concerns finding the very same batch, or even one that will carefully resemble what you purchased, even more down the line, so this is highly recommended.

Make sure you have the best type of adhesive.

According to the expert tradesmen from Great Tilers, less skilled DIY enthusiasts can utilize the ready-mix kind of adhesive, however an expert tiler will constantly apply the powdered option. It dries slower and thus allows you to better adjust and align the whole wall tiling.

Valuable tip: When tiling kitchen area splashbacks or damp rooms, or installing restroom tiles in general, adhesive need to be waterproof.

Make certain the wall is level or your tile setup may not be successful.

Tiling an irregular wall has the potential to lead to disaster. A simple method to spot abnormalities is by positioning something long and flat (i.e. a regular plank) on the wall and moving it across. This way, you can recognize any swollen areas or bumps, ought to they exist.

An uneven wall can avoid adhesive from sticking– which could cause your whole wall setup to collapse. According to professional tilers, anything in between 3 and 6mm is still workable– however anything beyond that is most likely to cause trouble.

If you decide to use a slightly thicker layer of adhesive to compensate, its grip might loosen up– causing undesirable concerns even more down the line.

Different surface areas require different methods of preparation.

Some surfaces, such as a fresh drywall, require a minimum of a month to effectively dry. Other cases, such as when you’re tiling on wood, need a coat of polyurethane paint. Make certain you have the right solution for your specific wall and, whenever in doubt, seek advice from an expert tiler.

Tile board backers are a great method to handle unequal surfaces with very little effort.

Although somewhat pricier, tile board backers can help you solve the issue– not to mention that these items are resistant to wetness, and can effectively avoid mould (which is understood to grow on permeable products in warm, wet conditions). This benefit makes tile backer boards an useful solution for restrooms, locations and showers surrounding the cooking area sink.

The one disadvantage of tile backer boards is that using such products will make your fresh tile setup a little more pricey.

Handy suggestion: One crucial thing to make sure of here is that the boards are well-mounted and tough.

Can you set up brand-new tiles on top of old tiles?

Tiling over old tiles is possible– but it’s constantly better to retile and remove.

Most tiles are too smooth for adhesive to properly bond and, in these cases, additional treatment is required. Depending on the toolkit you have at hand, you might either try a sander (with medium to coarse sandpaper) or a grinding disc. You should, however, show additional caution so as not to damage the stability of your old tiling.

Essential: Constantly examine for empty space behind old tiles. To do this, simply knock on each piece with your hand and listen out for hollow noises. Locations with hollow space are easy to identify, but beware– if you stop working to identify these and tile over them anyway, you run the risk of having your fresh tiles collapse in the reasonably future.

tiling tools

What tools will I require for a Do It Yourself tile installation?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Routine energy knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a similar tool).
  • Pencil.
  • Determining tape.
  • Drill.
  • Pins (to support the tile up until the adhesive bonds and dries off).
  • Level.

Essential: Ensure your surface is always dust, dirt and moisture-free or there’s an opportunity your adhesive might not correctly bond.

For a lot of kinds of masonry, ceramic and vinyl tiles will stick– but for wooden surfaces, you’ll require to apply a coat of paint or prime.

How do I prep drywall for a fresh tile installation?

Fresh drywall needs approximately a month prior to it’s ready for tiling, but when the time comes, you won’t need to tape the joints. All you’ll need to do is apply a skim coat and sand. As soon as done, tidy the surface from dust, dry any indications of moisture and apply the adhesive.

Crucial: For locations rich with wetness, use waterproof plasterboard.

How do I prep old drywall for a fresh tile installation?

It’s essential to appropriately assess whether the wall is steady and strong adequate to hold the weight of fresh tiling. If you’re unsure, you ought to constantly ask for suggestions from a skilled tiler.

Complete any cracks or holes from pins, nails or any other kind of wall fitting, use the primer, leave it to dry, sand one more time, and after that use the adhesive.

How do I prep the wall for tiles if the drywall is already painted or textured?

According to experts, you need to use PVA or make a Do It Yourself guide by including a bit more water to your adhesive.

After that, there are a few crucial tasks to take care of:.

  • Eliminate depreciated paint.
  • Repair cracks and holes.
  • If bumps are present, sand.
  • Wipe the surface area.
  • Make sure there are no signs of oil or grease.

Helpful idea: Deal with the wall with Trisodium Phosphate (TSP). It’s an effective cleaning agent, stain eliminator and degreaser– but bear in mind that this should, naturally, be kept well away from children.

How do I prep a plywood surface for fresh tiling?

The reality is that plywood appropriates for tiling your floorings but not as practical when it concerns walls. The material is made of compressed wood mixed with different oils, which indicates that heat can affect it. If exposed to significant and frequent modifications in temperature level, tiles and grout will likely crack.

How do I prep a wallpapered wall for tiling?

When it pertains to walls, tiles use much more longevity and usefulness than wallpaper, and the very best choice is to get rid of wallpaper any place possible. The most problem-free and effective method is by exposing the space to steam– but this approach does include some threats. The high temperatures and moisture can potentially trigger damage which is often beyond easy repair work if you’re treating drywall or crafted wood through steam.

You can just wipe the surface area with a warm and damp rag. In this manner, moisture will not permeate through to the substrate itself– however at the same time, the wallpaper will loosen up. Repeat the treatment a few times and use a scraper to peel whatever with minimal effort.

When done, all you’ll need to do prior to using guide or adhesive is to ensure the surface is dry and clean.

You can set up new tiles on different surfaces, as long you prepare the wall properly. When proper preparation is done, you can easily apply adhesive and stick your fresh tiles straight onto the wall.

Areas with hollow area are simple to spot, but beware– if you stop working to identify these and tile over them anyway, you run the danger of having your fresh tiles collapse in the reasonably near future.

The reality is that plywood is suitable for tiling your floorings but not as useful when it comes to walls. When it comes to walls, tiles offer far more longevity and practicality than wallpaper, and the best option is to get rid of wallpaper anywhere possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally unchangeable in place in an array to cover roofs, floors, walls, edges, or extra objects such as tabletops. Alternatively, tile can sometimes adopt to same units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In unorthodox sense, a tile is a construction tile or same object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of ablaze clay.

Tiles are often used to form wall and floor coverings, and can range from easy square tiles to puzzling or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but new materials are along with commonly used, such as glass, cork, concrete and other composite materials, and stone. Tiling rock is typically marble, onyx, granite or slate. Thinner tiles can be used upon walls than on floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button