WHY SELECT ModernTiling

There are several tiling business in Dublin, but it’s always the most important to trust and pick. Your single click when browsing for “local tilers near me” online or calling someone over the phone can help you find a tiler in Dublin. Selecting the best tiling system in Dublin can be a difficult task.

We are a qualified and licensed tiling firm in Dublin. Having a number of years of experience and skilled business tilers in Dublin, we can enthrall the look of your place with our gorgeous ceramic tiles.

How to Prepare a Wall for Tiling (Step-by-Step + Leading Tips).


Preparing your walls for a fresh wall tile installation is hassle-free and easy with our no-nonsense guide ready.

You can install new tiles on different surfaces, as long you prepare the wall appropriately. Simply make sure the surface area is level enough, and dust and dirt-free– and that there are no indications of residual moisture. When appropriate preparation is done, you can easily use adhesive and stick your fresh tiles straight onto the wall.

How to get ready for tiling a wall:.

  • Get rid of old fittings, such as pins, screws, rivets etc
  • Repair work or get rid of unsuited plaster.
  • Eliminate or pre-treat wallpaper (if present).
  • Fix any fractures or signs of damage.
  • Level the surface.
  • Sand, so that the adhesive can bond.
  • Ensure the surface is dirt, dust and grease-free.
  • Choose the suitable guide for your kind of surface area.

Other important planning to do before you get going:

  • Step your square footage.
  • Find out the number of tiles needed for the task.
  • Purchase least 10% more tiles in case of breakage during the setup. You might wish to increase the quantity to 20% or even 30% additional if you’re about to install delicate patterns. There are no assurances when it pertains to discovering the very same batch, or perhaps one that will closely resemble what you bought, even more down the line, so this is extremely advised.

Ensure you have the ideal type of adhesive.

According to the expert tradesmen from Wonderful Tilers, less experienced Do It Yourself lovers can use the ready-mix type of adhesive, but a professional tiler will always apply the powdered service. It dries slower and thus enables you to better change and align the whole wall tiling.

Helpful pointer: When tiling kitchen area splashbacks or wet spaces, or setting up restroom tiles in general, adhesive must be water-resistant.

Make certain the wall is level or your tile setup may not be successful.

Tiling an uneven wall has the potential to result in disaster. An easy way to spot abnormalities is by putting something long and flat (i.e. a routine plank) on the wall and moving it throughout. This way, you can recognize any inflamed areas or bumps, ought to they exist.

An uneven wall can avoid adhesive from sticking– which could cause your whole wall setup to collapse. According to professional tilers, anything between 3 and 6mm is still practical– but anything beyond that is most likely to cause trouble.

If you decide to apply a slightly thicker layer of adhesive to compensate, its grip might loosen up– resulting in undesirable problems further down the line.

Various surface areas require different means of preparation.

Some surface areas, such as a fresh drywall, require at least a month to effectively dry. Other cases, such as when you’re tiling on wood, need a coat of polyurethane paint. Make certain you have the right option for your particular wall and, whenever in doubt, talk to a professional tiler.

Tile board backers are a great way to deal with unequal surface areas with minimal effort.

Slightly costlier, tile board backers can assist you fix the issue– not to point out that these products are resistant to moisture, and can successfully prevent mould (which is understood to grow on porous materials in warm, damp conditions). This benefit makes tile backer boards a practical option for areas, showers and bathrooms surrounding the kitchen area sink.

The one disadvantage of tile backer boards is that using such products will make your fresh tile setup a little bit more pricey.

Helpful suggestion: One essential thing to make certain of here is that the boards are well-mounted and tough.

Can you install brand-new tiles on top of old tiles?

Tiling over old tiles is possible– but it’s constantly much better to retile and eliminate.

Most tiles are too smooth for adhesive to effectively bond and, in these cases, extra treatment is required. Depending on the toolkit you have at hand, you could either attempt a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, act with extra caution so as not to harm the integrity of your old tiling.

Essential: Constantly check for empty space behind old tiles. To do this, just knock on each piece with your hand and listen out for hollow noises. Locations with hollow area are easy to spot, but beware– if you stop working to identify these and tile over them anyhow, you run the risk of having your fresh tiles collapse in the reasonably near future.

tiling tools

What tools will I need for a DIY tile setup?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Regular utility knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a similar tool).
  • Pencil.
  • Measuring tape.
  • Drill.
  • Pins (to support the tile until the adhesive bonds and dries off).
  • Level.

Crucial: Make sure your surface area is constantly dust, dirt and moisture-free or there’s a possibility your adhesive might not effectively bond.

For a lot of kinds of masonry, ceramic and vinyl tiles will stick– but for wooden surfaces, you’ll require to use a coat of paint or prime.

How do I prep drywall for a fresh tile setup?

Fresh drywall requires as much as a month prior to it’s ready for tiling, however when the time comes, you will not have to tape the joints. All you’ll require to do is apply a skim coat and sand. As soon as done, clean the surface area from dust, dry any signs of wetness and apply the adhesive.

Important: For areas abundant with wetness, use waterproof plasterboard.

How do I prep old drywall for a fresh tile setup?

It’s vital to properly assess whether the wall is strong and steady sufficient to hold the weight of fresh tiling. If you’re unsure, you should always request recommendations from an experienced tiler.

Complete any fractures or holes from pins, nails or any other type of wall fitting, use the primer, leave it to dry, sand one more time, and after that use the adhesive.

How do I prep the wall for tiles if the drywall is currently painted or textured?

According to professionals, you ought to apply PVA or make a Do It Yourself guide by adding a bit more water to your adhesive.

After that, there are a couple of important jobs to take care of:.

  • Get rid of diminished paint.
  • Repair cracks and holes.
  • If bumps are present, sand.
  • Wipe the surface area.
  • Make certain there are no indications of oil or grease.

Practical pointer: Deal with the wall with Trisodium Phosphate (TSP). It’s a powerful cleaner, stain cleaner and degreaser– but bear in mind that this should, of course, be kept well away from children.

How do I prep a plywood surface area for fresh tiling?

The reality is that plywood is suitable for tiling your floors but not as practical when it pertains to walls. The product is made of compressed wood mixed with various oils, which implies that heat can affect it. If exposed to frequent and dramatic changes in temperature, tiles and grout will likely break.

How do I prep a wallpapered wall for tiling?

When it pertains to walls, tiles use far more durability and usefulness than wallpaper, and the very best option is to get rid of wallpaper any place possible. The most effective and problem-free method is by exposing the room to steam– but this method does come with some risks. If you’re dealing with drywall or crafted wood via steam, the high temperatures and moisture can possibly cause damage which is frequently beyond easy repair.

Additionally, you can merely wipe the surface area with a warm and wet rag. By doing this, wetness won’t permeate through to the substrate itself– but at the same time, the wallpaper will loosen up. Repeat the treatment a couple of times and use a scraper to peel everything with very little effort.

When done, all you’ll need to do prior to using guide or adhesive is to make certain the surface area is dry and tidy.

You can install new tiles on different surface areas, as long you prepare the wall appropriately. When appropriate preparation is done, you can quickly apply adhesive and stick your fresh tiles straight onto the wall.

Locations with hollow space are simple to spot, but beware– if you stop working to find these and tile over them anyway, you run the risk of having your fresh tiles collapse in the relatively near future.

The reality is that plywood is suitable for tiling your floors but not as practical when it comes to walls. When it comes to walls, tiles provide far more durability and functionality than wallpaper, and the finest option is to get rid of wallpaper any place possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally unlimited in place in an array to lid roofs, floors, walls, edges, or further objects such as tabletops. Alternatively, tile can sometimes concentrate on to thesame units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In unconventional sense, a tile is a construction tile or similar object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of enthusiastic clay.

Tiles are often used to form wall and floor coverings, and can range from simple square tiles to highbrow or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but further materials are also commonly used, such as glass, cork, concrete and additional composite materials, and stone. Tiling rock is typically marble, onyx, granite or slate. Thinner tiles can be used upon walls than upon floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button