WHY SELECT Modern Tiling

There are several tiling business in Dublin, but it’s always the most essential to trust and choose. Your single click when searching for “regional tilers near me” online or calling somebody over the phone can help you discover a tiler in Dublin. Yet choosing the best tiling system in Dublin can be a complicated job. The problem is who to get in touch with the Dublin tiling centers. Don’t think all of you blindly. Modern Tiling may be the perfect option for your tiling needs.

We are a qualified and certified tiling company in Dublin. Having several years of experience and proficient business tilers in Dublin, we can enthrall the look of your location with our gorgeous ceramic tiles.

How to Prepare a Wall for Tiling (Leading + detailed Tips).


Preparing your walls for a fresh wall tile installation is problem-free and basic with our no-nonsense guide at the ready.

You can set up new tiles on different surfaces, as long you prepare the wall properly. Just ensure the surface area is level enough, and dust and dirt-free– and that there are no signs of residual moisture. When proper preparation is done, you can quickly use adhesive and stick your fresh tiles straight onto the wall.

How to get ready for tiling a wall:.

  • Remove old fittings, such as pins, screws, rivets and so on
  • Repair work or eliminate unsuited plaster.
  • If present), get rid of or pre-treat wallpaper (.
  • Repair any fractures or indications of damage.
  • Level the surface.
  • Sand, so that the adhesive can bond.
  • Ensure the surface area is dirt, grease-free and dust.
  • Choose the appropriate primer for your type of surface area.

Other essential planning to do before you get started:

  • Procedure your square video.
  • Find out the number of tiles needed for the job.
  • Purchase least 10% more tiles in case of damage during the installation. If you will set up fragile patterns, you might wish to increase the amount to 20% and even 30% additional. There are no guarantees when it comes to discovering the same batch, and even one that will carefully resemble what you purchased, even more down the line, so this is extremely recommended.

Make certain you have the best kind of adhesive.

According to the professional tradesmen from Great Tilers, less experienced DIY lovers can use the ready-mix type of adhesive, however an expert tiler will constantly apply the powdered solution. It dries slower and therefore allows you to much better adjust and align the whole wall tiling.

Practical pointer: When tiling cooking area splashbacks or wet spaces, or setting up bathroom tiles in general, adhesive must be waterproof.

Ensure the wall is level or your tile setup might not succeed.

Tiling an uneven wall has the possible to lead to disaster. A simple way to spot abnormalities is by positioning something long and flat (i.e. a regular slab) on the wall and moving it throughout. This way, you can identify any swollen locations or bumps, must they exist.

An irregular wall can avoid adhesive from sticking– which could cause your whole wall setup to collapse. According to professional tilers, anything between 3 and 6mm is still workable– however anything beyond that is most likely to cause trouble.

Its grip may loosen– leading to undesirable problems further down the line if you decide to apply a slightly thicker layer of adhesive to compensate.

Various surfaces require different ways of preparation.

Some surface areas, such as a fresh drywall, need a minimum of a month to appropriately dry. Other cases, such as when you’re tiling on wood, require a coat of polyurethane paint. Make sure you have the ideal service for your specific wall and, whenever in doubt, consult with an expert tiler.

Tile board backers are a great way to handle irregular surfaces with minimal effort.

Although somewhat costlier, tile board backers can assist you resolve the issue– not to mention that these items are resistant to wetness, and can successfully prevent mould (which is understood to grow on permeable materials in warm, wet conditions). This advantage makes tile backer boards a practical option for bathrooms, showers and locations surrounding the kitchen sink.

The one disadvantage of tile backer boards is that making use of such products will make your fresh tile setup a little more pricey.

Helpful suggestion: One essential thing to make certain of here is that the boards are strong and well-mounted.

Can you set up brand-new tiles on top of old tiles?

Tiling over old tiles is possible– but it’s constantly much better to retile and get rid of.

The majority of tiles are too smooth for adhesive to appropriately bond and, in these cases, additional treatment is needed. Depending upon the toolkit you have at hand, you could either attempt a sander (with medium to coarse sandpaper) or a grinding disc. You should, however, act with extra caution so as not to damage the stability of your old tiling.

Crucial: Always inspect for void behind old tiles. To do this, merely knock on each piece with your hand and listen out for hollow sounds. Areas with hollow space are simple to identify, but beware– if you stop working to spot these and tile over them anyhow, you run the risk of having your fresh tiles collapse in the fairly future.

tiling tools

What tools will I require for a Do It Yourself tile installation?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Routine energy knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a similar tool).
  • Pencil.
  • Measuring tape.
  • Drill.
  • Pins (to support the tile till the adhesive bonds and dries off).
  • Level.

Essential: Make certain your surface area is always dust, dirt and moisture-free or there’s an opportunity your adhesive may not properly bond.

For a lot of types of masonry, ceramic and vinyl tiles will stick– but for wooden surface areas, you’ll need to use a coat of paint or prime.

How do I prep drywall for a fresh tile setup?

Fresh drywall requires approximately a month before it’s ready for tiling, however when the time comes, you will not have to tape the joints. All you’ll need to do is use a skim coat and sand. As soon as done, clean the surface from dust, dry any indications of moisture and use the adhesive.

Important: For locations rich with moisture, usage water-resistant plasterboard.

How do I prep old drywall for a fresh tile setup?

It’s essential to appropriately assess whether the wall is stable and strong enough to hold the weight of fresh tiling. You should constantly ask for advice from an experienced tiler if you’re uncertain.

Fill out any cracks or holes from pins, nails or any other kind of wall fitting, use the primer, leave it to dry, sand one more time, and then use the adhesive.

How do I prep the wall for tiles if the drywall is currently painted or textured?

According to professionals, you should apply PVA or make a DIY primer by including a bit more water to your adhesive.

After that, there are a couple of important tasks to look after:.

  • Get rid of depreciated paint.
  • Repair fractures and holes.
  • If bumps are present, sand.
  • Wipe the surface area.
  • Make certain there are no signs of oil or grease.

Practical idea: Deal with the wall with Trisodium Phosphate (TSP). It’s a powerful cleaning agent, stain cleaner and degreaser– but remember that this should, of course, be kept well away from kids.

How do I prep a plywood surface for fresh tiling?

When it comes to walls, the fact is that plywood is appropriate for tiling your floorings however not as useful. The material is made from compressed wood mixed with various oils, which means that heat can affect it. If exposed to significant and regular changes in temperature, tiles and grout will likely split.

How do I prep a wallpapered wall for tiling?

When it pertains to walls, tiles use much more longevity and usefulness than wallpaper, and the very best alternative is to remove wallpaper anywhere possible. The most effective and hassle-free way is by exposing the room to steam– however this technique does come with some dangers. If you’re treating drywall or crafted wood via steam, the high temperatures and wetness can potentially trigger damage which is frequently beyond simple repair.

You can merely clean the surface with a warm and damp rag. This way, wetness will not penetrate through to the substrate itself– but at the same time, the wallpaper will chill out. Repeat the treatment a few times and use a scraper to peel whatever with minimal effort.

As soon as done, all you’ll need to do prior to applying guide or adhesive is to ensure the surface area is dry and tidy.

You can set up new tiles on various surfaces, as long you prepare the wall appropriately. When correct preparation is done, you can easily use adhesive and stick your fresh tiles straight onto the wall.

Locations with hollow space are simple to identify, but beware– if you stop working to find these and tile over them anyhow, you run the danger of having your fresh tiles collapse in the relatively near future.

The reality is that plywood is suitable for tiling your floorings but not as practical when it comes to walls. When it comes to walls, tiles use far more durability and usefulness than wallpaper, and the best option is to get rid of wallpaper any place possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally unquestionable in place in an array to cover roofs, floors, walls, edges, or extra objects such as tabletops. Alternatively, tile can sometimes forward to similar units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In choice sense, a tile is a construction tile or similar object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of excited clay.

Tiles are often used to form wall and floor coverings, and can range from easy square tiles to perplexing or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but additional materials are afterward commonly used, such as glass, cork, concrete and other composite materials, and stone. Tiling rock is typically marble, onyx, granite or slate. Thinner tiles can be used upon walls than upon floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button