WHY PICK Modern Tiling

There are a number of tiling companies in Dublin, but it’s constantly the most important to trust and pick. Your single click when searching for “local tilers near me” online or calling somebody over the phone can assist you discover a tiler in Dublin. Picking the right tiling system in Dublin can be a difficult task.

We are a certified and licensed tiling firm in Dublin. Having several years of experience and proficient industrial tilers in Dublin, we can enthrall the appearance of your place with our stunning ceramic tiles.

How to Prepare a Wall for Tiling (Leading + step-by-step Tips).

tilers

Preparing your walls for a fresh wall tile setup is hassle-free and basic with our no-nonsense guide at the ready.

You can set up new tiles on various surfaces, as long you prepare the wall properly. Just make sure the surface area is level enough, and dust and dirt-free– and that there are no indications of residual moisture. When appropriate preparation is done, you can easily apply adhesive and stick your fresh tiles straight onto the wall.

How to prepare for tiling a wall:.

  • Eliminate old fittings, such as pins, screws, rivets etc
  • Repair work or eliminate unsuited plaster.
  • Eliminate or pre-treat wallpaper (if present).
  • Repair any fractures or signs of damage.
  • Level the surface.
  • Sand, so that the adhesive can bond.
  • Make certain the surface is dirt, dust and grease-free.
  • Select the appropriate primer for your type of surface.

Other crucial planning to do prior to you get going:

  • Measure your square footage.
  • Find out the number of tiles needed for the job.
  • Buy at least 10% more tiles in case of breakage throughout the setup. You might wish to increase the amount to 20% or even 30% extra if you’re about to set up delicate patterns. There are no assurances when it concerns discovering the very same batch, or even one that will carefully resemble what you bought, further down the line, so this is highly recommended.

Make sure you have the best type of adhesive.

According to the professional tradespersons from Wonderful Tilers, less knowledgeable Do It Yourself enthusiasts can utilize the ready-mix kind of adhesive, however a professional tiler will always apply the powdered option. It dries slower and therefore allows you to much better change and align the entire wall tiling.

Helpful idea: When tiling kitchen area splashbacks or damp rooms, or installing bathroom tiles in general, adhesive must be waterproof.

Make sure the wall is level or your tile setup may not achieve success.

Tiling an unequal wall has the prospective to lead to disaster. An easy method to find irregularities is by placing something long and flat (i.e. a routine slab) on the wall and sliding it throughout. This way, you can identify any inflamed areas or bumps, ought to they exist.

An irregular wall can prevent adhesive from sticking– which could trigger your entire wall setup to collapse. According to expert tilers, anything between 3 and 6mm is still practical– however anything beyond that is likely to cause trouble.

Its grip may loosen– leading to unwanted problems further down the line if you decide to apply a somewhat thicker layer of adhesive to compensate.

Various surfaces need different means of preparation.

Some surfaces, such as a fresh drywall, require a minimum of a month to appropriately dry. Other cases, such as when you’re tiling on wood, require a coat of polyurethane paint. Make certain you have the right solution for your particular wall and, whenever in doubt, seek advice from an expert tiler.

Tile board backers are a fantastic method to manage unequal surface areas with very little effort.

Although a little pricier, tile board backers can assist you solve the issue– not to mention that these items are resistant to moisture, and can effectively prevent mould (which is understood to grow on porous products in warm, wet conditions). This benefit makes tile backer boards a practical service for areas, restrooms and showers surrounding the cooking area sink.

The one drawback of tile backer boards is that making use of such items will make your fresh tile installation a little bit more costly.

Valuable idea: One essential thing to ensure of here is that the boards are well-mounted and strong.

Can you install brand-new tiles on top of old tiles?

Tiling over old tiles is possible– however it’s constantly better to get rid of and retile.

A lot of tiles are too smooth for adhesive to effectively bond and, in these cases, additional treatment is needed. Depending upon the toolkit you have at hand, you might either try a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, act with extra caution so as not to damage the stability of your old tiling.

Essential: Always examine for empty space behind old tiles. To do this, simply knock on each piece with your hand and listen out for hollow sounds. Areas with hollow space are easy to identify, but beware– if you fail to identify these and tile over them anyway, you risk of having your fresh tiles collapse in the fairly future.

tiling tools

What tools will I require for a Do It Yourself tile setup?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Regular energy knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a comparable tool).
  • Pencil.
  • Measuring tape.
  • Drill.
  • Pins (to support the tile till the adhesive bonds and dries off).
  • Level.

Crucial: Make sure your surface is always dust, dirt and moisture-free or there’s an opportunity your adhesive may not properly bond.

For many types of masonry, ceramic and vinyl tiles will stick– but for wooden surface areas, you’ll need to use a coat of paint or prime.

How do I prep drywall for a fresh tile installation?

Fresh drywall requires approximately a month prior to it’s ready for tiling, however when the time comes, you will not have to tape the joints. All you’ll need to do is apply a skim coat and sand. Once done, tidy the surface area from dust, dry any indications of moisture and use the adhesive.

Crucial: For areas rich with moisture, usage water-resistant plasterboard.

How do I prep old drywall for a fresh tile installation?

It’s essential to correctly assess whether the wall is stable and strong sufficient to hold the weight of fresh tiling. You ought to constantly ask for advice from an experienced tiler if you’re unsure.

Fill out any fractures or holes from pins, nails or any other type of wall fitting, apply the primer, leave it to dry, sand one more time, and then apply the adhesive.

How do I prep the wall for tiles if the drywall is already painted or textured?

According to specialists, you must apply PVA or make a Do It Yourself guide by including a bit more water to your adhesive.

After that, there are a couple of essential jobs to look after:.

  • Get rid of diminished paint.
  • Repair fractures and holes.
  • If bumps are present, sand.
  • Wipe the surface area.
  • Make sure there are no indications of oil or grease.

Valuable suggestion: Treat the wall with Trisodium Phosphate (TSP). It’s a powerful cleaner, stain remover and degreaser– however keep in mind that this should, naturally, be kept well away from children.

How do I prep a plywood surface for fresh tiling?

The reality is that plywood appropriates for tiling your floorings but not as practical when it pertains to walls. The material is made of compressed wood combined with various oils, which means that heat can affect it. , if exposed to dramatic and frequent significant in significant, tiles and grout will likely crack.

How do I prep a wallpapered wall for tiling?

When it comes to walls, tiles offer far more longevity and practicality than wallpaper, and the best choice is to eliminate wallpaper any place possible. The most efficient and problem-free way is by exposing the space to steam– but this method does feature some risks. If you’re treating drywall or engineered wood by means of steam, the high temperatures and wetness can possibly trigger damage which is frequently beyond simple repair work.

Additionally, you can just clean the surface area with a wet and warm rag. This way, wetness won’t penetrate through to the substrate itself– but at the same time, the wallpaper will chill out. Repeat the procedure a few times and use a scraper to peel everything with minimal effort.

When done, all you’ll need to do prior to using guide or adhesive is to make certain the surface is tidy and dry.

You can set up new tiles on numerous surfaces, as long you prepare the wall appropriately. When proper preparation is done, you can quickly apply adhesive and stick your fresh tiles straight onto the wall.

Locations with hollow area are simple to spot, but beware– if you fail to spot these and tile over them anyway, you run the risk of having your fresh tiles collapse in the relatively near future.

The reality is that plywood is ideal for tiling your floors but not as practical when it comes to walls. When it comes to walls, tiles use far more durability and usefulness than wallpaper, and the finest choice is to get rid of wallpaper any place possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally pure in place in an array to cover roofs, floors, walls, edges, or other objects such as tabletops. Alternatively, tile can sometimes focus on to similar units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In option sense, a tile is a construction tile or similar object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of fired clay.

Tiles are often used to form wall and floor coverings, and can range from simple square tiles to complex or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but supplementary materials are then commonly used, such as glass, cork, concrete and new composite materials, and stone. Tiling rock is typically marble, onyx, granite or slate. Thinner tiles can be used on walls than on floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button