WHY CHOOSE ModernTiling.ie

There are a number of tiling business in Dublin, but it’s constantly the most crucial to trust and choose. Your single click when browsing for “local tilers near me” online or calling somebody over the phone can help you discover a tiler in Dublin. Choosing the right tiling system in Dublin can be a complicated job.

We are a competent and licensed tiling agency in Dublin. Having several years of experience and skilled industrial tilers in Dublin, we can enthrall the appearance of your location with our beautiful ceramic tiles.

How to Prepare a Wall for Tiling (Leading + step-by-step Tips).

tilers

Preparing your walls for a fresh wall tile setup is problem-free and easy with our no-nonsense guide ready.

You can install brand-new tiles on numerous surface areas, as long you prepare the wall appropriately. Simply ensure the surface area is level enough, and dust and dirt-free– which there are no signs of recurring wetness. When appropriate preparation is done, you can quickly apply adhesive and stick your fresh tiles straight onto the wall.

How to get ready for tiling a wall:.

  • Remove old fittings, such as pins, screws, rivets and so on
  • Repair work or remove unsuited plaster.
  • Eliminate or pre-treat wallpaper (if present).
  • Fix any cracks or signs of damage.
  • Level the surface.
  • Sand, so that the adhesive can bond.
  • Ensure the surface is dirt, grease-free and dust.
  • Pick the proper guide for your kind of surface area.

Other crucial planning to do prior to you get started:

  • Step your square video.
  • Figure out the number of tiles needed for the task.
  • Purchase least 10% more tiles in case of breakage throughout the setup. If you’re about to install delicate patterns, you may want to increase the total up to 20% or perhaps 30% extra. There are no warranties when it concerns discovering the exact same batch, or even one that will carefully resemble what you bought, further down the line, so this is highly suggested.

Make certain you have the best kind of adhesive.

According to the expert tradesmen from Fantastic Tilers, less skilled Do It Yourself enthusiasts can utilize the ready-mix kind of adhesive, but an expert tiler will always apply the powdered solution. It dries slower and therefore allows you to better change and line up the whole wall tiling.

Practical tip: When tiling kitchen splashbacks or wet rooms, or installing bathroom tiles in general, adhesive should be water-resistant.

Make sure the wall is level or your tile setup may not achieve success.

Tiling an uneven wall has the possible to lead to catastrophe. A simple way to identify irregularities is by positioning something long and flat (i.e. a routine slab) on the wall and moving it throughout. This way, you can identify any inflamed areas or bumps, need to they exist.

An unequal wall can prevent adhesive from sticking– which could cause your entire wall setup to collapse. According to professional tilers, anything between 3 and 6mm is still practical– however anything beyond that is likely to cause trouble.

If you decide to apply a somewhat thicker layer of adhesive to compensate, its grip might loosen up– leading to undesirable issues further down the line.

Different surface areas need various methods of preparation.

Some surfaces, such as a fresh drywall, need at least a month to appropriately dry. Other cases, such as when you’re tiling on wood, require a coat of polyurethane paint. Make certain you have the right solution for your specific wall and, whenever in doubt, talk to an expert tiler.

Tile board backers are a great method to handle unequal surfaces with very little effort.

Although somewhat more expensive, tile board backers can assist you resolve the issue– not to mention that these items are resistant to moisture, and can effectively avoid mould (which is known to grow on permeable products in warm, wet conditions). This benefit makes tile backer boards a practical option for areas, showers and bathrooms surrounding the kitchen sink.

The one drawback of tile backer boards is that using such items will make your fresh tile setup a little more pricey.

Practical tip: One important thing to make certain of here is that the boards are well-mounted and durable.

Can you install brand-new tiles on top of old tiles?

Tiling over old tiles is possible– but it’s constantly much better to retile and remove.

Many tiles are too smooth for adhesive to properly bond and, in these cases, extra treatment is required. Depending on the toolkit you have at hand, you might either attempt a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, show additional caution so as not to harm the stability of your old tiling.

Essential: Constantly examine for empty space behind old tiles. To do this, just knock on each piece with your hand and listen out for hollow sounds. Locations with hollow space are simple to identify, however beware– if you stop working to spot these and tile over them anyway, you run the risk of having your fresh tiles collapse in the reasonably future.

tiling tools

What tools will I require for a DIY tile setup?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Regular utility knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a comparable tool).
  • Pencil.
  • Determining tape.
  • Drill.
  • Pins (to support the tile until the adhesive bonds and dries off).
  • Level.

Important: Ensure your surface is always dust, dirt and moisture-free or there’s a chance your adhesive might not effectively bond.

For most types of masonry, ceramic and vinyl tiles will stick– but for wood surface areas, you’ll require to use a coat of paint or prime.

How do I prep drywall for a fresh tile installation?

Fresh drywall needs as much as a month prior to it’s ready for tiling, however when the time comes, you will not have to tape the joints. All you’ll need to do is apply a skim coat and sand. Once done, tidy the surface from dust, dry any indications of moisture and use the adhesive.

Essential: For areas rich with wetness, usage waterproof plasterboard.

How do I prep old drywall for a fresh tile installation?

It’s essential to correctly examine whether the wall is steady and strong enough to hold the weight of fresh tiling. You ought to constantly ask for guidance from a skilled tiler if you’re unsure.

Fill out any cracks or holes from pins, nails or any other kind of wall fitting, apply the primer, leave it to dry, sand one more time, and then apply the adhesive.

How do I prep the wall for tiles if the drywall is already painted or textured?

According to experts, you should apply PVA or make a DIY guide by adding a bit more water to your adhesive.

After that, there are a few crucial tasks to look after:.

  • Get rid of depreciated paint.
  • Repair cracks and holes.
  • If bumps are present, sand.
  • Clean the surface area.
  • Make sure there are no indications of oil or grease.

Practical idea: Treat the wall with Trisodium Phosphate (TSP). It’s an effective cleaning agent, stain cleaner and degreaser– however keep in mind that this should, obviously, be kept well away from children.

How do I prep a plywood surface area for fresh tiling?

The truth is that plywood is suitable for tiling your floorings however not as practical when it comes to walls. The product is made of compressed wood combined with different oils, which indicates that heat can affect it. If exposed to remarkable and regular changes in temperature, tiles and grout will likely crack.

How do I prep a wallpapered wall for tiling?

When it concerns walls, tiles use far more longevity and functionality than wallpaper, and the best option is to get rid of wallpaper wherever possible. The most hassle-free and effective method is by exposing the space to steam– but this method does include some threats. If you’re treating drywall or engineered wood by means of steam, the high temperatures and wetness can potentially trigger damage which is typically beyond simple repair work.

Alternatively, you can simply wipe the surface with a warm and wet rag. This way, wetness won’t permeate through to the substrate itself– however at the same time, the wallpaper will chill out. Repeat the procedure a couple of times and utilize a scraper to peel everything with very little effort.

As soon as done, all you’ll need to do prior to applying guide or adhesive is to make certain the surface area is tidy and dry.

You can set up new tiles on numerous surface areas, as long you prepare the wall appropriately. When proper preparation is done, you can easily use adhesive and stick your fresh tiles straight onto the wall.

Locations with hollow area are simple to identify, but beware– if you stop working to spot these and tile over them anyhow, you run the threat of having your fresh tiles collapse in the fairly near future.

The truth is that plywood is ideal for tiling your floorings however not as practical when it comes to walls. When it comes to walls, tiles provide far more durability and practicality than wallpaper, and the finest alternative is to remove wallpaper any place possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally truth in place in an array to lid roofs, floors, walls, edges, or other objects such as tabletops. Alternatively, tile can sometimes take in hand to similar units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In substitute sense, a tile is a construction tile or thesame object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of in flames clay.

Tiles are often used to form wall and floor coverings, and can range from easy square tiles to perplexing or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but new materials are after that commonly used, such as glass, cork, concrete and further composite materials, and stone. Tiling rock is typically marble, onyx, granite or slate. Thinner tiles can be used on walls than on floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button