Welcome to Modern Tiling. Established in 2000, we’re among the leading tilers in Dublin. With decades of experience, we specialise in delivering top quality domestic tiling & business tiling services across Dublin. Consistency and quality are at the core of everything we do, allowing us to become amongst the most reliable tiling companies in Dublin.

With years of tiling experience, our dynamic team have satisfied essentially every tiling demand possible, developing lasting relationships with a host of customers & providers and crafting a service unlike any tiling company in Dublin. From minor works to massive projects, we put customer complete satisfaction and efficiency above all else, guaranteeing we provide on-time, in spending plan and to a high standard.

How to tile a wall

 

Develop a sensational wall with appealing, useful and resilient wall tiles

tiler dublin
Tiling is an experienced job however we’re here to assist you get the very best surface to your wall tiles. Whether you’re tiling an entire restroom, a shower cubicle, a splashback in a cooking area or a little section around a fireplace, our recommendations will assist you attain a fantastic outcome.
Before you begin, it is necessary to prepare your tiling. Determining the variety of tiles & adhesive you require, planning and preparing the wall out the position of the tiles are all necessary factors. Our guide to planning your wall tiles covers all you require to understand before tiling.
This guide will stroll you through how to lay the tiles. In our example we’re tiling an entire wall with square tiles in a linear tiling design. We’ll discuss how to:

  • Fix entire tiles to a wall
  • Cut tiles for barriers and corners and apply corner tile trim
  • Grout and surface wall tiles
  • Seal around the edges of tiling

tiling

Tools & Materials

 

Materials

 

  • Wall tiles
  • Filler – if you have any holes in the wall that need filling. We advise getting a professional to make the repair work if the hole in the wall is bigger than the size of your fist.
  • Tile adhesive – we recommend ready-mixed tile adhesive to conserve time
  • Tile spacers
  • Hygienic sealant – we suggest anti-mould sealant for a surface that lasts
  • Grout – we advise ready-mixed grout
  • Multi-purpose fabrics
  • Tile trim – as needed.

 

Tools

 

  • Rule
  • Tape measure
  • Chinagraph pencil or felt-tip pen – if required, to mark tiles for cutting
  • Trowel
  • Notched trowel (likewise called a notched spreader).
  • Tile cutter.
  • Tile file – if required.
  • Hacksaw – if needed, to cut the tile trim.
  • Grout spreader (likewise referred to as a grout float).
  • Grout finisher (likewise called a grout shaper).
  • Claw hammer.
  • Sponge.
  • Container.
  • Level.
  • Cartridge gun – if needed. Some sealant comes as a trigger weapon and doesn’t require a cartridge gun. Inspect the item guidelines for the sealant.
  • Sealant smoother.

 

Security package.

 

  • Security gloves.
  • Dust mask.

 

 

Security.

 

  • Use safety goggles and a dust mask to safeguard you from flying pieces and sharp edges when cutting tiles.

 

How to tile a whole wall.

Once you’ve prepared the tiles, prepared the wall and repaired your lumber battens, lay whole tiles initially by following these steps.

wall tiling step 1

 

Action 1.

Scoop up some tile adhesive with the trowel and press it onto the wall, beginning in the corner formed by the lumber battens. The ridges in the adhesive will make sure there’s an equal amount behind each tile, making it simpler to get them all level.
Pick a suitable tile adhesive for your tiles: for ceramic tiles use a ready-mixed tile adhesive or powder adhesive and a powder tile adhesive for porcelain tiles.
If your tiles are larger than 20 x 20, apply adhesive to the wall and also on the back of the tiles.

 

Action 2.

Put your very first tile into the corner, pressing its edges against the corners and the whole tile strongly versus the wall. Then add a tile above it and one next to the original tile pushing them firmly into the adhesive utilizing a twisting action.
Wipe off any adhesive from the tiles with a wet sponge as you go– if you let it dry it’ll be really challenging to take off.
Leading pointer – applying mosaic tiles.
When using mosaic tiles to the wall, hold a piece of board over the tiles while the adhesive is wet and tap the board lightly with a rubber mallet. This will offer the tiles a flat, even end up.
Some mosaics are set at various heights, in which case you ought to use your hand to guarantee they’re all individually bedded into the adhesive.

Action 3.

When needed, put tile spacers into the corners between the tiles and change the tile positions as and. Press them in firmly and place them flush versus the wall so you can grout over them.

Step 4.

Include another tile above the last one you applied, and another next to it. Continue applying the whole tiles in this way up until you’ve tiled the area covered with tile adhesive.
Apply another square metre of adhesive and tiles till you have actually fixed all the whole tiles.
At the edges of the wall, put one leg of the spacer between the tiles so the rest is protruding– we’ll remove this later prior to grouting.

Step 5.

Leave to dry for the length of time directed on the tile adhesive guidelines.

Action 6.

Eliminate the vertical wood batten by prising out it’s nails with the claw of a hammer.

Action 7.

Repair entire tiles to the other section of the wall, starting from the corner beside the tiles you’ve currently fixed.

Step 8.

As soon as all the entire tiles have been repaired and are dry, remove the horizontal wood batten.
Now you’ve fixed all of the whole tiles, you’re ready to fill the edges and corners of the wall. Head to ‘How to tile corners’ to find out how to do this.

How to tile corners.

In this area, we’ll talk you through tiling corners. There are 2 kinds of corner– external and internal. These could be corners developed by walls or corners produced by obstructions:.

Internal corner.

The corner sign up with between two walls, for instance the corner of a room, or the corner created by a door frame.

External corner.

Outward-facing corner that protrudes into the room, for instance the corner of a feature wall or the edge of a window recess.
There’s a various method for tiling depending on the kind of corner, and we’ll explain both methods in this area.
In some cases you might discover that you can fit whole tiles throughout the wall without requiring to cut a tile for the corner. If no cuts are required, jump to the section ‘How to grout and finish wall tiles’.
In most cases, you’ll need to cut a tile to fit into the corner.

How to measure and mark tiles for cutting.

There are two methods to mark a tile and determine for cutting:.

Option 1.

Hold the tile you’ll be cutting over the last entire tile in the row. Fit another against the wall and mark where it overlaps the one below with a tile scribe, chinagraph pencil or felt-tip pen.

Alternative 2.

Take separate measurements at the top and bottom of the space you’re going to fill using a tape measure. Mark the measurements at the top and bottom of the tile. Line up the square with the two marks and draw the line between them with a pencil or felt-tip pen, providing you a vertical line to cut along.
With the marks made, it’s time to cut the tiles. Head to our How to cut tiles article for guidance on this.

Step 1.

After you have actually cut the tile, check to see that it fits. , if you need to make any small adjustments utilize a tile file..
If you’re likewise going to tile the surrounding wall, you do not need to be totally accurate as the edges will be hidden by the tiles on the other wall.

How to tile internal corners.

 

Step 1.

After you have actually cut the tile, check to see that it fits. If you need to make any little modifications use a tile file. You do not have to be totally accurate as the edges will be concealed by the tiles on the other wall if you’re also going to tile the surrounding wall.

Step 2.

Utilize the narrow end of a notched spreader to put adhesive on the back of the cut tile. Then press it into place so it’s level with the adjacent tile. Use spacers if you require to.

Action 3.

Move on to the next wall if you’re tiling more than one wall. If not, you’re ready to start grouting and ending up the tiles. For guidance on this, dive to our section ‘How to finish and grout wall tiles’.

How to tile external corners.

Usage tile trims to get a cool finish on external corners. It likewise assists to safeguard the edges of the tiles from knocks, which might chip them.

Action 1.

Finish tiling your very first wall.

Action 2.

Utilize a measuring tape to determine the length of the edge that you’ll be repairing the tile trim to.

Action 3.

Step the tile trim to the exact same size and make a mark on it to suggest where to cut. Use a hacksaw to cut the tile trim to the length you need.

Step 4.

Include a narrow strip of tile adhesive to the untiled wall using the notched trowel and press the trim into it.

Step 5.

Line the trim up with the tiles of your first wall. Put two spacers between the trim and each tile (one near the top of the tile and one near the bottom) to ensure there’s a space for grout.

Action 6.

Put more tile adhesive on the untitled wall with the notched trowel. Add the adhesive vertically from top to bottom to prevent knocking the tile cut out of place with the teeth of the notched trowel.

Step 7.

Start tiling your second wall, working far from the corner trim. As you set the tiles in place, keep in mind to allow a narrow grouting gap between them and the trim. Place spacers and change the tiles as you go, so the gap remains the same and the trim stays in location.

How to grout and complete wall tiles.

When the tiles are repaired in place and the adhesive has actually dried, it’s time to apply the grout.

Step 1.

Get rid of the extending tile spacers at the edges of the wall and at corners.

Action 2.

Starting in the bottom left corner, press a percentage of grout onto the face of the tiles with a trowel.
Use a grout spreader, likewise referred to as a grout float, to spread it, making long, diagonal strokes and working it into the joints in between tiles. Continue till you’ve grouted all the joints. The grout will soon start to solidify, so do this as quick as you can.
Split it into sections and grout a section at a time if you’re grouting a large location. This is to prevent the grout solidifying excessive whilst you finish grouting the entire location.

Step 3.

Immediately after you finish applying the grout, go over the tiles with a damp sponge (but not too wet as this might cause discolouration) to eliminate any excess. Make sure not to drag any grout from the joints.

Step 4.

Leave the grout to dry. As it does, you’ll see a powdery film appear on the tiles from all the sponging. Clean this off with a soft, clean cloth.

How to seal around the edge of tiling.

Sealing around the edge of tiling is necessary to stop water getting behind the tiles, particularly around worktops, basins and kitchen sinks. Water behind tiles can trigger damage to the wall, components and fittings. We’ll talk you through sealing the edge of tiling with sanitary sealant.

Action 1.

Connect the nozzle to the sealant and cut off the idea, as directed by the product directions. If required, put the sealant into the cartridge weapon.

Action 2.

Run a constant bead of sealant, working from one end of the tiled location to the other, from left to. Attempt to keep a consistent pressure on the trigger of the gun and a constant speed when you’re doing this.

Action 3.

Smooth any abnormalities in the shape of the bead with a sealant smoother (or a wet finger), but take care not to pull the sealant from the surface area.

Step 4.

 

Leave the sealant to dry.

Calculating the number of tiles & adhesive you need, preparing the wall and planning out the position of the tiles are all essential aspects. Our guide to planning your wall tiles covers all you require to understand before tiling.

In our example we’re tiling a whole wall with square tiles in a linear tiling style. If you’re also going to tile the surrounding wall, you do not have to be absolutely precise as the edges will be hidden by the tiles on the other wall.
Start tiling your 2nd wall, working away from the corner trim.

Modern Tiling Videos

 

 

Learn More About Tiling

 

 

Related Articles

 

 

Modern Tiling Services

 

 

Around the Web

 

Call Now Button