There are several tiling companies in Dublin, however it’s always the most crucial to trust and choose. Your single click when browsing for “local tilers near me” online or calling somebody over the phone can assist you discover a tiler in Dublin. Selecting the right tiling system in Dublin can be an overwhelming job.

We are a certified and qualified tiling agency in Dublin. Having a number of years of experience and skilled industrial tilers in Dublin, we can mesmerize the look of your location with our beautiful ceramic tiles.

How to Prepare a Wall for Tiling (Leading + detailed Tips).


Preparing your walls for a fresh wall tile setup is basic and problem-free with our no-nonsense guide ready.

You can set up brand-new tiles on various surfaces, as long you prepare the wall appropriately. Simply make certain the surface area is level enough, and dust and dirt-free– which there are no signs of residual wetness. When correct preparation is done, you can quickly use adhesive and stick your fresh tiles straight onto the wall.

How to prepare for tiling a wall:.

  • Get rid of old fittings, such as pins, screws, rivets etc
  • Repair work or eliminate unfit plaster.
  • Eliminate or pre-treat wallpaper (if present).
  • Repair any cracks or indications of damage.
  • Level the surface.
  • Sand, so that the adhesive can bond.
  • Make certain the surface area is dirt, dust and grease-free.
  • Choose the appropriate primer for your kind of surface area.

Other essential planning to do before you get going:

  • Measure your square footage.
  • Find out the variety of tiles required for the job.
  • Purchase least 10% more tiles in case of breakage during the setup. If you’re about to install fragile patterns, you may wish to increase the amount to 20% and even 30% additional. There are no warranties when it comes to discovering the same batch, or perhaps one that will closely resemble what you bought, further down the line, so this is highly advised.

Make sure you have the right type of adhesive.

According to the expert tradesmen from Fantastic Tilers, less knowledgeable DIY enthusiasts can use the ready-mix type of adhesive, however a professional tiler will always use the powdered option. It dries slower and hence allows you to much better adjust and line up the whole wall tiling.

Helpful pointer: When tiling cooking area splashbacks or damp rooms, or installing restroom tiles in general, adhesive must be water-resistant.

Make certain the wall is level or your tile installation may not succeed.

Tiling an irregular wall has the prospective to lead to disaster. A simple method to spot irregularities is by positioning something long and flat (i.e. a regular slab) on the wall and sliding it across. By doing this, you can determine any swollen areas or bumps, ought to they exist.

An unequal wall can prevent adhesive from sticking– which might cause your entire wall setup to collapse. According to expert tilers, anything between 3 and 6mm is still practical– however anything beyond that is likely to cause trouble.

Its grip may loosen up– leading to undesirable concerns further down the line if you choose to use a slightly thicker layer of adhesive to compensate.

Various surfaces need various ways of preparation.

Some surface areas, such as a fresh drywall, require a minimum of a month to properly dry. Other cases, such as when you’re tiling on wood, require a coat of polyurethane paint. Make sure you have the ideal solution for your particular wall and, whenever in doubt, talk to a professional tiler.

Tile board backers are a fantastic way to handle unequal surfaces with very little effort.

Although somewhat pricier, tile board backers can help you fix the problem– not to mention that these products are resistant to wetness, and can effectively prevent mould (which is known to grow on permeable materials in warm, damp conditions). This benefit makes tile backer boards an useful solution for bathrooms, locations and showers surrounding the kitchen area sink.

The one drawback of tile backer boards is that utilising such products will make your fresh tile installation a bit more pricey.

Valuable tip: One essential thing to make certain of here is that the boards are sturdy and well-mounted.

Can you install new tiles on top of old tiles?

Tiling over old tiles is possible– however it’s always better to retile and remove.

The majority of tiles are too smooth for adhesive to effectively bond and, in these cases, extra treatment is needed. Depending on the toolkit you have at hand, you might either try a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, act with additional caution so as not to damage the integrity of your old tiling.

Crucial: Constantly examine for void behind old tiles. To do this, just knock on each piece with your hand and listen out for hollow noises. Locations with hollow space are simple to identify, but beware– if you stop working to identify these and tile over them anyhow, you risk of having your fresh tiles collapse in the relatively near future.

tiling tools

What tools will I require for a DIY tile installation?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Routine energy knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a similar tool).
  • Pencil.
  • Determining tape.
  • Drill.
  • Pins (to support the tile up until the adhesive bonds and dries off).
  • Level.

Essential: Make sure your surface is constantly dust, dirt and moisture-free or there’s an opportunity your adhesive may not properly bond.

For a lot of kinds of masonry, ceramic and vinyl tiles will stick– but for wood surface areas, you’ll need to apply a coat of paint or prime.

How do I prep drywall for a fresh tile installation?

Fresh drywall requires as much as a month before it’s ready for tiling, but when the time comes, you won’t need to tape the joints. All you’ll need to do is apply a skim coat and sand. As soon as done, tidy the surface from dust, dry any signs of moisture and use the adhesive.

Essential: For locations rich with moisture, usage waterproof plasterboard.

How do I prep old drywall for a fresh tile setup?

It’s essential to appropriately evaluate whether the wall is strong and steady enough to hold the weight of fresh tiling. You need to constantly ask for guidance from an experienced tiler if you’re unsure.

Fill in any cracks or holes from pins, nails or any other type of wall fitting, apply the primer, leave it to dry, sand one more time, and after that apply the adhesive.

How do I prep the wall for tiles if the drywall is currently painted or textured?

According to professionals, you need to apply PVA or make a Do It Yourself primer by including a bit more water to your adhesive.

After that, there are a few crucial jobs to look after:.

  • Remove diminished paint.
  • Repair fractures and holes.
  • If bumps are present, sand.
  • Clean the surface.
  • Make sure there are no signs of oil or grease.

Handy suggestion: Deal with the wall with Trisodium Phosphate (TSP). It’s an effective cleaning agent, stain cleaner and degreaser– but bear in mind that this should, naturally, be kept well away from kids.

How do I prep a plywood surface for fresh tiling?

When it comes to walls, the reality is that plywood is ideal for tiling your floorings however not as useful. The product is made of compressed wood mixed with different oils, which implies that heat can impact it. If exposed to regular and significant modifications in temperature level, tiles and grout will likely break.

How do I prep a wallpapered wall for tiling?

When it pertains to walls, tiles offer much more durability and functionality than wallpaper, and the very best option is to eliminate wallpaper anywhere possible. The most hassle-free and effective method is by exposing the room to steam– but this approach does feature some threats. The high temperatures and wetness can possibly trigger damage which is frequently beyond basic repair work if you’re treating drywall or crafted wood by means of steam.

You can just wipe the surface area with a warm and wet rag. By doing this, wetness won’t penetrate through to the substrate itself– however at the same time, the wallpaper will loosen up. Repeat the procedure a couple of times and utilize a scraper to peel whatever with minimal effort.

As soon as done, all you’ll need to do prior to using guide or adhesive is to ensure the surface area is clean and dry.

You can set up brand-new tiles on numerous surface areas, as long you prepare the wall appropriately. When correct preparation is done, you can easily apply adhesive and stick your fresh tiles straight onto the wall.

Areas with hollow area are easy to spot, however beware– if you stop working to identify these and tile over them anyway, you run the risk of having your fresh tiles collapse in the reasonably near future.

The reality is that plywood is suitable for tiling your floors however not as useful when it comes to walls. When it comes to walls, tiles use far more durability and practicality than wallpaper, and the finest choice is to get rid of wallpaper any place possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally fixed in place in an array to cover roofs, floors, walls, edges, or other objects such as tabletops. Alternatively, tile can sometimes lecture to to thesame units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In out of the ordinary sense, a tile is a construction tile or thesame object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of afire clay.

Tiles are often used to form wall and floor coverings, and can range from simple square tiles to complex or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but extra materials are with commonly used, such as glass, cork, concrete and other composite materials, and stone. Tiling rock is typically marble, onyx, granite or slate. Thinner tiles can be used on walls than upon floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button