WHY CHOOSE US

There are a number of tiling companies in Dublin, but it’s always the most crucial to trust and select. Your single click when browsing for “regional tilers near me” online or calling someone over the phone can help you find a tiler in Dublin. Selecting the best tiling system in Dublin can be an overwhelming task.

We are a qualified and licensed tiling firm in Dublin. Having a number of years of experience and skilled business tilers in Dublin, we can mesmerize the look of your location with our beautiful ceramic tiles.

How to Prepare a Wall for Tiling (Top + step-by-step Tips).

tilers

Preparing your walls for a fresh wall tile installation is problem-free and basic with our no-nonsense guide at the ready.

You can install new tiles on different surfaces, as long you prepare the wall properly. Simply make certain the surface area is level enough, and dust and dirt-free– which there are no indications of residual moisture. When proper preparation is done, you can quickly use adhesive and stick your fresh tiles straight onto the wall.

How to get ready for tiling a wall:.

  • Remove old fittings, such as pins, screws, rivets and so on
  • Repair or get rid of unsuited plaster.
  • If present), get rid of or pre-treat wallpaper (.
  • Fix any fractures or signs of damage.
  • Level the surface.
  • Sand, so that the adhesive can bond.
  • Ensure the surface area is dirt, dust and grease-free.
  • Choose the appropriate guide for your type of surface area.

Other important planning to do prior to you get going:

  • Step your square video.
  • Figure out the variety of tiles required for the job.
  • Purchase least 10% more tiles in case of damage during the setup. If you will install fragile patterns, you may want to increase the amount to 20% or even 30% extra. There are no guarantees when it comes to discovering the very same batch, or even one that will carefully resemble what you bought, further down the line, so this is extremely recommended.

Make sure you have the best kind of adhesive.

According to the expert tradespersons from Wonderful Tilers, less skilled Do It Yourself lovers can utilize the ready-mix type of adhesive, but an expert tiler will constantly use the powdered option. It dries slower and therefore enables you to better adjust and line up the entire wall tiling.

Practical idea: When tiling cooking area splashbacks or wet spaces, or installing restroom tiles in general, adhesive must be water-resistant.

Ensure the wall is level or your tile setup may not succeed.

Tiling an irregular wall has the possible to lead to catastrophe. An easy way to find irregularities is by placing something long and flat (i.e. a regular plank) on the wall and moving it across. In this manner, you can identify any inflamed locations or bumps, must they exist.

An irregular wall can avoid adhesive from sticking– which could trigger your entire wall installation to collapse. According to professional tilers, anything in between 3 and 6mm is still convenient– but anything beyond that is likely to cause trouble.

If you choose to use a slightly thicker layer of adhesive to compensate, its grip might loosen up– causing undesirable issues even more down the line.

Different surfaces require various ways of preparation.

Some surfaces, such as a fresh drywall, need a minimum of a month to correctly dry. Other cases, such as when you’re tiling on wood, require a coat of polyurethane paint. Ensure you have the ideal service for your specific wall and, whenever in doubt, consult with a professional tiler.

Tile board backers are a great way to deal with irregular surfaces with minimal effort.

Although somewhat costlier, tile board backers can help you fix the issue– not to mention that these products are resistant to moisture, and can effectively avoid mould (which is understood to grow on permeable products in warm, moist conditions). This benefit makes tile backer boards an useful service for areas, showers and bathrooms surrounding the cooking area sink.

The one downside of tile backer boards is that utilising such products will make your fresh tile installation a little bit more pricey.

Valuable tip: One vital thing to ensure of here is that the boards are well-mounted and tough.

Can you set up brand-new tiles on top of old tiles?

Tiling over old tiles is possible– but it’s always much better to remove and retile.

Many tiles are too smooth for adhesive to correctly bond and, in these cases, extra treatment is needed. Depending upon the toolkit you have at hand, you could either attempt a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, act with additional care so as not to harm the stability of your old tiling.

Important: Constantly check for void behind old tiles. To do this, just knock on each piece with your hand and listen out for hollow noises. Areas with hollow space are easy to spot, however beware– if you fail to find these and tile over them anyway, you risk of having your fresh tiles collapse in the relatively near future.

tiling tools

What tools will I require for a DIY tile installation?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Regular energy knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a comparable tool).
  • Pencil.
  • Determining tape.
  • Drill.
  • Pins (to support the tile up until the adhesive bonds and dries off).
  • Level.

Essential: Make sure your surface is always dust, dirt and moisture-free or there’s an opportunity your adhesive might not correctly bond.

For the majority of types of masonry, ceramic and vinyl tiles will stick– but for wooden surface areas, you’ll require to use a coat of paint or prime.

How do I prep drywall for a fresh tile setup?

Fresh drywall needs as much as a month prior to it’s ready for tiling, however when the time comes, you will not need to tape the joints. All you’ll require to do is use a skim coat and sand. When done, tidy the surface area from dust, dry any indications of wetness and apply the adhesive.

Crucial: For areas abundant with moisture, use waterproof plasterboard.

How do I prep old drywall for a fresh tile installation?

It’s vital to correctly examine whether the wall is strong and stable enough to hold the weight of fresh tiling. If you’re uncertain, you ought to constantly request for suggestions from an experienced tiler.

Complete any cracks or holes from pins, nails or any other type of wall fitting, apply the guide, leave it to dry, sand one more time, and then apply the adhesive.

How do I prep the wall for tiles if the drywall is already painted or textured?

According to professionals, you must apply PVA or make a DIY guide by adding a bit more water to your adhesive.

After that, there are a few crucial tasks to look after:.

  • Get rid of diminished paint.
  • Repair fractures and holes.
  • Sand if bumps are present.
  • Wipe the surface area.
  • Make certain there are no signs of oil or grease.

Handy idea: Treat the wall with Trisodium Phosphate (TSP). It’s an effective cleaner, stain eliminator and degreaser– but bear in mind that this should, naturally, be kept well away from kids.

How do I prep a plywood surface for fresh tiling?

When it comes to walls, the truth is that plywood is appropriate for tiling your floorings however not as useful. The product is made from compressed wood blended with various oils, which implies that heat can impact it. , if exposed to dramatic and frequent changes in temperature, tiles and modifications will likely crack.

How do I prep a wallpapered wall for tiling?

When it pertains to walls, tiles use even more durability and practicality than wallpaper, and the best choice is to remove wallpaper wherever possible. The most effective and problem-free method is by exposing the room to steam– but this approach does include some dangers. The high temperatures and moisture can possibly cause damage which is frequently beyond easy repair if you’re treating drywall or engineered wood through steam.

Alternatively, you can merely clean the surface area with a warm and wet rag. In this manner, wetness will not penetrate through to the substrate itself– however at the same time, the wallpaper will relax. Repeat the treatment a few times and use a scraper to peel whatever with very little effort.

When done, all you’ll require to do prior to applying guide or adhesive is to make certain the surface area is dry and tidy.

You can install new tiles on various surface areas, as long you prepare the wall appropriately. When appropriate preparation is done, you can easily apply adhesive and stick your fresh tiles straight onto the wall.

Locations with hollow space are easy to identify, however beware– if you fail to identify these and tile over them anyway, you run the threat of having your fresh tiles collapse in the relatively near future.

The reality is that plywood is suitable for tiling your floors however not as useful when it comes to walls. When it comes to walls, tiles use far more longevity and usefulness than wallpaper, and the finest choice is to remove wallpaper anywhere possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally answer in place in an array to cover roofs, floors, walls, edges, or additional objects such as tabletops. Alternatively, tile can sometimes deal with to similar units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In choice sense, a tile is a construction tile or thesame object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of passionate clay.

Tiles are often used to form wall and floor coverings, and can range from easy square tiles to technical or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but supplementary materials are as a consequence commonly used, such as glass, cork, concrete and other composite materials, and stone. Tiling rock is typically marble, onyx, granite or slate. Thinner tiles can be used on walls than on floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button