WHY SELECT US

There are numerous tiling companies in Dublin, however it’s always the most crucial to trust and choose. Your single click when looking for “local tilers near me” online or calling someone over the phone can help you discover a tiler in Dublin. Choosing the best tiling system in Dublin can be a challenging job. The issue is who to get in touch with the Dublin tiling facilities. Do not think all of you blindly. Modern Tiling may be the ideal option for your tiling needs.

We are a competent and certified tiling firm in Dublin. Having several years of experience and competent industrial tilers in Dublin, we can enthrall the appearance of your place with our stunning ceramic tiles.

How to Prepare a Wall for Tiling (Step-by-Step + Top Tips).

tilers

Preparing your walls for a fresh wall tile installation is simple and problem-free with our no-nonsense guide at the ready.

You can set up brand-new tiles on different surface areas, as long you prepare the wall properly. Simply ensure the surface is level enough, and dust and dirt-free– which there are no indications of recurring moisture. When correct preparation is done, you can quickly apply adhesive and stick your fresh tiles straight onto the wall.

How to prepare for tiling a wall:.

  • Remove old fittings, such as pins, screws, rivets etc
  • Repair or remove unfit plaster.
  • If present), get rid of or pre-treat wallpaper (.
  • Repair any fractures or signs of damage.
  • Level the surface.
  • Sand, so that the adhesive can bond.
  • Ensure the surface area is grease-free, dirt and dust.
  • Select the proper primer for your type of surface.

Other important planning to do prior to you start:

  • Step your square video footage.
  • Determine the variety of tiles required for the job.
  • Purchase least 10% more tiles in case of breakage throughout the setup. You may wish to increase the amount to 20% or even 30% extra if you’re about to install delicate patterns. There are no warranties when it pertains to finding the exact same batch, or perhaps one that will closely resemble what you purchased, even more down the line, so this is highly advised.

Make sure you have the ideal kind of adhesive.

According to the expert tradesmen from Wonderful Tilers, less experienced DIY enthusiasts can utilize the ready-mix kind of adhesive, however an expert tiler will constantly use the powdered option. It dries slower and thus enables you to much better adjust and align the entire wall tiling.

Useful pointer: When tiling kitchen splashbacks or wet spaces, or setting up restroom tiles in general, adhesive need to be water-resistant.

Make sure the wall is level or your tile installation might not achieve success.

Tiling an uneven wall has the possible to lead to disaster. An easy method to spot abnormalities is by placing something long and flat (i.e. a regular slab) on the wall and moving it across. This way, you can determine any swollen locations or bumps, should they exist.

An irregular wall can prevent adhesive from sticking– which could cause your entire wall setup to collapse. According to professional tilers, anything between 3 and 6mm is still convenient– but anything beyond that is likely to cause trouble.

Its grip may loosen up– leading to undesirable concerns further down the line if you choose to apply a somewhat thicker layer of adhesive to compensate.

Various surface areas need different methods of preparation.

Some surface areas, such as a fresh drywall, need a minimum of a month to correctly dry. Other cases, such as when you’re tiling on wood, require a coat of polyurethane paint. Ensure you have the ideal option for your particular wall and, whenever in doubt, consult with an expert tiler.

Tile board backers are a fantastic method to handle unequal surfaces with minimal effort.

Although slightly pricier, tile board backers can assist you resolve the issue– not to mention that these items are resistant to moisture, and can successfully avoid mould (which is known to grow on porous products in warm, moist conditions). This benefit makes tile backer boards a practical option for areas, showers and bathrooms surrounding the kitchen area sink.

The one disadvantage of tile backer boards is that utilising such products will make your fresh tile installation a bit more costly.

Practical pointer: One essential thing to make certain of here is that the boards are durable and well-mounted.

Can you set up brand-new tiles on top of old tiles?

Tiling over old tiles is possible– however it’s always better to eliminate and retile.

A lot of tiles are too smooth for adhesive to appropriately bond and, in these cases, extra treatment is required. Depending upon the toolkit you have at hand, you might either try a sander (with medium to coarse sandpaper) or a grinding disc. You should, nevertheless, act with extra caution so as not to damage the stability of your old tiling.

Essential: Constantly examine for void behind old tiles. To do this, merely knock on each piece with your hand and listen out for hollow sounds. Locations with hollow space are simple to find, however beware– if you fail to identify these and tile over them anyhow, you run the risk of having your fresh tiles collapse in the fairly future.

tiling tools

What tools will I need for a Do It Yourself tile installation?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Routine energy knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a comparable tool).
  • Pencil.
  • Measuring tape.
  • Drill.
  • Pins (to support the tile up until the adhesive bonds and dries off).
  • Level.

Important: Make sure your surface is always dust, dirt and moisture-free or there’s an opportunity your adhesive may not appropriately bond.

For most kinds of masonry, ceramic and vinyl tiles will stick– but for wood surfaces, you’ll require to apply a coat of paint or prime.

How do I prep drywall for a fresh tile setup?

Fresh drywall requires up to a month prior to it’s ready for tiling, but when the time comes, you will not need to tape the joints. All you’ll need to do is use a skim coat and sand. When done, clean the surface area from dust, dry any signs of moisture and apply the adhesive.

Important: For areas abundant with moisture, use water-resistant plasterboard.

How do I prep old drywall for a fresh tile setup?

It’s essential to effectively evaluate whether the wall is stable and strong enough to hold the weight of fresh tiling. You must always ask for recommendations from a knowledgeable tiler if you’re uncertain.

Fill out any cracks or holes from pins, nails or any other kind of wall fitting, apply the primer, leave it to dry, sand one more time, and then use the adhesive.

How do I prep the wall for tiles if the drywall is already painted or textured?

According to professionals, you must apply PVA or make a DIY primer by adding a bit more water to your adhesive.

After that, there are a couple of crucial jobs to take care of:.

  • Get rid of diminished paint.
  • Repair cracks and holes.
  • If bumps are present, sand.
  • Wipe the surface area.
  • Make certain there are no signs of oil or grease.

Practical tip: Treat the wall with Trisodium Phosphate (TSP). It’s an effective cleaner, stain remover and degreaser– however keep in mind that this should, obviously, be kept well away from children.

How do I prep a plywood surface area for fresh tiling?

The reality is that plywood is suitable for tiling your floors however not as useful when it pertains to walls. The product is made from compressed wood mixed with various oils, which indicates that heat can impact it. If exposed to frequent and dramatic changes in temperature level, tiles and grout will likely split.

How do I prep a wallpapered wall for tiling?

When it concerns walls, tiles use far more longevity and practicality than wallpaper, and the best choice is to get rid of wallpaper any place possible. The most effective and problem-free way is by exposing the room to steam– however this approach does come with some dangers. If you’re dealing with drywall or engineered wood via steam, the heats and wetness can possibly trigger damage which is typically beyond easy repair.

Alternatively, you can just wipe the surface area with a wet and warm rag. By doing this, moisture won’t permeate through to the substrate itself– however at the same time, the wallpaper will loosen up. Repeat the procedure a few times and use a scraper to peel everything with minimal effort.

As soon as done, all you’ll need to do prior to using primer or adhesive is to make certain the surface area is clean and dry.

You can set up brand-new tiles on various surfaces, as long you prepare the wall properly. When appropriate preparation is done, you can quickly use adhesive and stick your fresh tiles straight onto the wall.

Locations with hollow space are easy to identify, however beware– if you stop working to find these and tile over them anyhow, you run the threat of having your fresh tiles collapse in the reasonably near future.

The truth is that plywood is ideal for tiling your floorings but not as useful when it comes to walls. When it comes to walls, tiles offer far more durability and usefulness than wallpaper, and the finest option is to eliminate wallpaper any place possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally complete in place in an array to lid roofs, floors, walls, edges, or additional objects such as tabletops. Alternatively, tile can sometimes take in hand to similar units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In substitute sense, a tile is a construction tile or similar object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of ablaze clay.

Tiles are often used to form wall and floor coverings, and can range from simple square tiles to technical or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but extra materials are as a consequence commonly used, such as glass, cork, concrete and extra composite materials, and stone. Tiling rock is typically marble, onyx, granite or slate. Thinner tiles can be used upon walls than upon floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button