WHY CHOOSE ModernTiling.ie

There are a number of tiling business in Dublin, but it’s constantly the most important to trust and pick. Your single click when searching for “regional tilers near me” online or calling somebody over the phone can help you discover a tiler in Dublin. Choosing the right tiling system in Dublin can be an overwhelming job.

We are a certified and licensed tiling agency in Dublin. Having numerous years of experience and knowledgeable business tilers in Dublin, we can enthrall the appearance of your place with our beautiful ceramic tiles.

How to Prepare a Wall for Tiling (Leading + detailed Tips).

tilers

Preparing your walls for a fresh wall tile setup is hassle-free and easy with our no-nonsense guide ready.

You can set up new tiles on numerous surface areas, as long you prepare the wall appropriately. Just make sure the surface is level enough, and dust and dirt-free– which there are no indications of residual moisture. When proper preparation is done, you can easily use adhesive and stick your fresh tiles straight onto the wall.

How to get ready for tiling a wall:.

  • Get rid of old fittings, such as pins, screws, rivets and so on
  • Repair work or remove unsuited plaster.
  • Get rid of or pre-treat wallpaper (if present).
  • Repair any cracks or indications of damage.
  • Level the surface.
  • Sand, so that the adhesive can bond.
  • Ensure the surface is dirt, dust and grease-free.
  • Pick the suitable primer for your type of surface.

Other essential preparation to do before you get going:

  • Procedure your square video footage.
  • Find out the variety of tiles required for the task.
  • Purchase least 10% more tiles in case of damage during the setup. If you’re about to install delicate patterns, you may wish to increase the total up to 20% or even 30% extra. There are no guarantees when it comes to finding the same batch, or even one that will carefully resemble what you bought, even more down the line, so this is extremely advised.

Ensure you have the best kind of adhesive.

According to the professional tradespersons from Great Tilers, less knowledgeable Do It Yourself enthusiasts can utilize the ready-mix kind of adhesive, but an expert tiler will always use the powdered service. It dries slower and thus enables you to much better adjust and align the whole wall tiling.

Useful idea: When tiling kitchen area splashbacks or wet rooms, or setting up bathroom tiles in general, adhesive must be water-resistant.

Ensure the wall is level or your tile setup may not succeed.

Tiling an unequal wall has the prospective to result in disaster. An easy way to find irregularities is by positioning something long and flat (i.e. a regular slab) on the wall and sliding it throughout. In this manner, you can recognize any inflamed areas or bumps, should they exist.

An unequal wall can avoid adhesive from sticking– which could cause your whole wall installation to collapse. According to professional tilers, anything in between 3 and 6mm is still workable– however anything beyond that is likely to cause trouble.

Its grip may loosen– leading to unwanted issues even more down the line if you choose to use a slightly thicker layer of adhesive to compensate.

Different surfaces require various methods of preparation.

Some surface areas, such as a fresh drywall, require a minimum of a month to properly dry. Other cases, such as when you’re tiling on wood, need a coat of polyurethane paint. Make sure you have the right solution for your specific wall and, whenever in doubt, consult with an expert tiler.

Tile board backers are an excellent method to manage unequal surfaces with minimal effort.

Although slightly more expensive, tile board backers can assist you solve the issue– not to mention that these products are resistant to moisture, and can effectively avoid mould (which is understood to grow on permeable products in warm, damp conditions). This advantage makes tile backer boards an useful service for showers, restrooms and locations surrounding the kitchen area sink.

The one drawback of tile backer boards is that making use of such items will make your fresh tile installation a little more expensive.

Useful pointer: One essential thing to make certain of here is that the boards are well-mounted and tough.

Can you set up brand-new tiles on top of old tiles?

Tiling over old tiles is possible– however it’s always much better to retile and eliminate.

Many tiles are too smooth for adhesive to properly bond and, in these cases, additional treatment is required. Depending upon the toolkit you have at hand, you might either try a sander (with medium to coarse sandpaper) or a grinding disc. You should, however, show additional caution so as not to harm the integrity of your old tiling.

Crucial: Always examine for void behind old tiles. To do this, merely knock on each piece with your hand and listen out for hollow noises. Locations with hollow space are easy to identify, but beware– if you fail to find these and tile over them anyway, you risk of having your fresh tiles collapse in the fairly near future.

tiling tools

What tools will I require for a Do It Yourself tile setup?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Routine utility knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a comparable tool).
  • Pencil.
  • Determining tape.
  • Drill.
  • Pins (to support the tile till the adhesive bonds and dries off).
  • Level.

Important: Make sure your surface area is always dust, dirt and moisture-free or there’s a possibility your adhesive might not properly bond.

For many types of masonry, ceramic and vinyl tiles will stick– but for wooden surfaces, you’ll need to use a coat of paint or prime.

How do I prep drywall for a fresh tile installation?

Fresh drywall needs as much as a month before it’s ready for tiling, however when the time comes, you won’t have to tape the joints. All you’ll need to do is apply a skim coat and sand. As soon as done, tidy the surface from dust, dry any signs of wetness and apply the adhesive.

Essential: For locations abundant with moisture, use water-resistant plasterboard.

How do I prep old drywall for a fresh tile setup?

It’s crucial to effectively evaluate whether the wall is strong and stable enough to hold the weight of fresh tiling. If you’re not sure, you need to always request for guidance from a knowledgeable tiler.

Complete any cracks or holes from pins, nails or any other kind of wall fitting, use the guide, leave it to dry, sand one more time, and after that use the adhesive.

How do I prep the wall for tiles if the drywall is currently painted or textured?

According to specialists, you must use PVA or make a Do It Yourself guide by including a bit more water to your adhesive.

After that, there are a couple of important jobs to take care of:.

  • Eliminate depreciated paint.
  • Repair fractures and holes.
  • If bumps are present, sand.
  • Wipe the surface.
  • Make sure there are no signs of oil or grease.

Helpful suggestion: Deal with the wall with Trisodium Phosphate (TSP). It’s a powerful cleaning agent, stain cleaner and degreaser– but remember that this should, obviously, be kept well away from children.

How do I prep a plywood surface for fresh tiling?

When it comes to walls, the truth is that plywood is appropriate for tiling your floors but not as practical. The material is made from compressed wood blended with various oils, which implies that heat can affect it. , if exposed to dramatic and frequent changes in significant, tiles and modifications will temperature level crack.

How do I prep a wallpapered wall for tiling?

When it pertains to walls, tiles provide even more durability and practicality than wallpaper, and the very best alternative is to get rid of wallpaper anywhere possible. The most efficient and problem-free way is by exposing the space to steam– but this approach does include some threats. The high temperatures and wetness can potentially trigger damage which is often beyond simple repair work if you’re treating drywall or engineered wood through steam.

Alternatively, you can merely clean the surface with a damp and warm rag. By doing this, moisture will not permeate through to the substrate itself– however at the same time, the wallpaper will loosen up. Repeat the treatment a few times and utilize a scraper to peel everything with minimal effort.

Once done, all you’ll require to do prior to applying guide or adhesive is to make certain the surface area is dry and tidy.

You can set up brand-new tiles on different surface areas, as long you prepare the wall properly. When correct preparation is done, you can easily apply adhesive and stick your fresh tiles straight onto the wall.

Areas with hollow space are simple to find, however beware– if you stop working to spot these and tile over them anyway, you run the risk of having your fresh tiles collapse in the reasonably near future.

The reality is that plywood is appropriate for tiling your floors however not as practical when it comes to walls. When it comes to walls, tiles offer far more durability and usefulness than wallpaper, and the best alternative is to eliminate wallpaper anywhere possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally utter in place in an array to lid roofs, floors, walls, edges, or additional objects such as tabletops. Alternatively, tile can sometimes take in hand to same units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In unconventional sense, a tile is a construction tile or thesame object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of fired up clay.

Tiles are often used to form wall and floor coverings, and can range from simple square tiles to mysterious or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but other materials are afterward commonly used, such as glass, cork, concrete and other composite materials, and stone. Tiling rock is typically marble, onyx, granite or slate. Thinner tiles can be used on walls than on floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button