WHY CHOOSE Modern Tiling

There are several tiling companies in Dublin, however it’s always the most crucial to trust and select. Your single click when browsing for “regional tilers near me” online or calling someone over the phone can assist you discover a tiler in Dublin. Choosing the best tiling system in Dublin can be an overwhelming task.

We are a qualified and licensed tiling company in Dublin. Having several years of experience and experienced business tilers in Dublin, we can mesmerize the look of your place with our gorgeous ceramic tiles.

Resolved! Yes, You Can Tile Over Tile

tilers
23447632 – laying ceramic floor tiles – man hands fitting the next piece, closeup

Does your tile require an update? Discover how you save effort and time in this Do It Yourself task– so long as you follow these rules of thumb for setup.

Q: I want to re-tile my floor, but I ‘d rather not go through the hassle of ripping up the existing floor covering first. Can you tile over tile in order to save time?

A: The short answer is, more than likely, yes. If your tiles remain in reasonably good condition– equally positioned, without cracks, and not appearing to maintain any wetness– then you can probably leave them underneath your brand-new layer of tile when tackling setting up a new floor and even a backsplash.

Evaluate the existing tile.

Prior to you begin tiling over tile, carry out a thorough evaluation of the base layer to pinpoint any surface irregularities, which can cause fundamental problems down the road. Mildew and deep staining in the grout typically indicate an absorption concern– suggesting that trapped water has actually damaged the grout and could therefore rot the new tile from listed below. An absorption concern will fester and aggravate when the tiles are concealed. Similarly, if the original tiles were not effectively installed, the new overlaying tiles will not lie flat or line up. If you do discover either of these issues, it’s better to start from scratch than to tile over the existing flooring.

Prepare the surface area for installation.

Tiling over an irregular surface will give you less-than-stellar results, so level out any globs of dried grout with a sander and safe and secure loose tiles with fresh tile adhesive before beginning the project. Then, set out your brand-new tiles and cut them to fit around the walls and components, as needed. Once all pieces of tile are cut to size, move them out of the way so that you can scrub down your base layer with a degreasing soap. Let the surface area dry completely before you begin taping off the edges of the job location with painter’s tape and setting out plastic sheets to secure surrounding surfaces.

Lay the groundwork for the new tile in stages.

Normally speaking, thin-set adhesive (also known as thin-set mortar) is fantastic for setting tiles in areas subject to moisture, like restrooms, while mastic adhesive is best for drier areas, like kitchen areas. Scoop the adhesive of option from its pail with a trowel and use a thin layer to a section of tiles just a couple of feet large, for beginners. Do not attempt to cover a complete floor or backsplash at once; since treating times may vary, you’ll wish to set each tile prior to the bonding agent is too dry to do its task. Score the surface adhesive with the toothed edge of your trowel by drawing straight lines along the damp surface area, as these grooves aid in the drying and adhesion process.

Position the tile as you go.

Set each tile atop the adhesive you have actually scored and strongly press it into location. When these remain in place, you can rotate through spreading adhesive, scoring, and laying tile until you’ve totally covered the area.

Pointer: To save much more time, use your adhesive directly to the back of your new tiles instead of preparing the location with thin-set adhesive. This method, though, need to be saved for scenarios where the initial tile is in best condition and you’re really only searching for a temporary repair up until you can try a more in-depth renovation project– positioning in this manner won’t set the tiles so safely that they last for generations without needing repair. Take a hint from the blogger at Renov8or, who chose to lay crisp white train tile over an old layer of beige squares in the kitchen merely by applying silicone adhesive to the back of each private tile, and putting them over the old tile with spacers in between to save space for even grout lines. While silicone isn’t a suggested adhesive for tiles that will come across great deals of water (a shower wall, for instance), this basic repair could cut your project time in half on areas where heavy splashing won’t be a concern in the long run.

Seal off your work.

No matter what kind of adhesive you’ve used underneath the new layer of tiles, you’ll need to apply grout in the grooves in between them. This action safeguards the entire surface from moisture creeping into the seams between each tile and leading to water damage or out-of-sight mildew development.

In short, you can tile over tile as long as you’re working on a fairly sound surface. The surface of the existing tile must be free of mold and mildew, totally level (including grout), and without any warping or strangely-placed tiles that may otherwise hinder a smooth new layer. Keep in mind that it’s finest not to lay heavy new tile over existing tile floors unless the foundation underneath both is concrete. Otherwise, the excess weight can trigger structural issues. Now go forth and enjoy your new, easy-to-install tile surface!

Prior to you begin tiling over tile, conduct an extensive assessment of the base layer to determine any surface area irregularities, which can trigger fundamental issues down the roadway. Tiling over an unequal surface area will offer you less-than-stellar outcomes, so level out any globs of dried grout with a sander and safe and secure loose tiles with fresh tile adhesive prior to starting the task. Take a cue from the blog writer at Renov8or, who chose to lay crisp white train tile over an old layer of beige squares in the kitchen simply by using silicone adhesive to the back of each private tile, and putting them over the old tile with spacers in between to save space for even grout lines. The surface area of the existing tile must be free of mold and mildew, entirely level (including grout), and without any warping or strangely-placed tiles that may otherwise interfere with a smooth new layer. Keep in mind that it’s best not to lay heavy brand-new tile over existing tile floorings unless the structure underneath both is concrete.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally pure in place in an array to cover roofs, floors, walls, edges, or supplementary objects such as tabletops. Alternatively, tile can sometimes deliver to same units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In unorthodox sense, a tile is a construction tile or thesame object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of fired up clay.

Tiles are often used to form wall and floor coverings, and can range from simple square tiles to mysterious or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but supplementary materials are as well as commonly used, such as glass, cork, concrete and extra composite materials, and stone. Tiling rock is typically marble, onyx, granite or slate. Thinner tiles can be used on walls than on floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button