WHY CHOOSE Modern Tiling

There are numerous tiling companies in Dublin, however it’s constantly the most crucial to trust and pick. Your single click when searching for “regional tilers near me” online or calling somebody over the phone can assist you find a tiler in Dublin. Selecting the right tiling system in Dublin can be a difficult task.

We are a certified and competent tiling agency in Dublin. Having a number of years of experience and proficient business tilers in Dublin, we can mesmerize the appearance of your place with our stunning ceramic tiles.

How to Prepare a Wall for Tiling (Step-by-Step + Leading Tips).


Preparing your walls for a fresh wall tile installation is problem-free and basic with our no-nonsense guide at the ready.

You can install brand-new tiles on different surfaces, as long you prepare the wall properly. Simply ensure the surface area is level enough, and dust and dirt-free– which there are no indications of residual moisture. When appropriate preparation is done, you can easily use adhesive and stick your fresh tiles straight onto the wall.

How to get ready for tiling a wall:.

  • Get rid of old fittings, such as pins, screws, rivets and so on
  • Repair or remove unfit plaster.
  • If present), get rid of or pre-treat wallpaper (.
  • Fix any cracks or signs of damage.
  • Level the surface area.
  • Sand, so that the adhesive can bond.
  • Make sure the surface area is grease-free, dust and dirt.
  • Choose the proper primer for your kind of surface.

Other essential preparation to do prior to you get started:

  • Measure your square footage.
  • Find out the variety of tiles needed for the job.
  • Buy at least 10% more tiles in case of damage throughout the installation. You may want to increase the amount to 20% or even 30% additional if you’re about to set up fragile patterns. There are no guarantees when it comes to discovering the exact same batch, or even one that will closely resemble what you bought, further down the line, so this is extremely suggested.

Ensure you have the best type of adhesive.

According to the professional tradesmen from Wonderful Tilers, less skilled DIY enthusiasts can utilize the ready-mix type of adhesive, but an expert tiler will constantly apply the powdered solution. It dries slower and therefore allows you to much better adjust and align the whole wall tiling.

Helpful idea: When tiling kitchen splashbacks or wet spaces, or setting up bathroom tiles in general, adhesive must be waterproof.

Ensure the wall is level or your tile installation may not be successful.

Tiling an uneven wall has the potential to result in disaster. An easy method to spot irregularities is by placing something long and flat (i.e. a routine plank) on the wall and sliding it throughout. This way, you can identify any swollen locations or bumps, ought to they exist.

An unequal wall can prevent adhesive from sticking– which could trigger your entire wall installation to collapse. According to professional tilers, anything in between 3 and 6mm is still workable– but anything beyond that is most likely to cause trouble.

Its grip might loosen– leading to undesirable issues further down the line if you choose to use a somewhat thicker layer of adhesive to compensate.

Different surfaces require various means of preparation.

Some surface areas, such as a fresh drywall, require at least a month to appropriately dry. Other cases, such as when you’re tiling on wood, require a coat of polyurethane paint. Make sure you have the right solution for your specific wall and, whenever in doubt, seek advice from an expert tiler.

Tile board backers are a terrific way to manage irregular surfaces with very little effort.

Although slightly costlier, tile board backers can assist you fix the issue– not to mention that these items are resistant to moisture, and can effectively prevent mould (which is known to grow on porous products in warm, damp conditions). This advantage makes tile backer boards a practical option for locations, restrooms and showers surrounding the kitchen area sink.

The one downside of tile backer boards is that using such products will make your fresh tile installation a bit more pricey.

Handy idea: One essential thing to ensure of here is that the boards are well-mounted and durable.

Can you install new tiles on top of old tiles?

Tiling over old tiles is possible– however it’s always much better to eliminate and retile.

A lot of tiles are too smooth for adhesive to properly bond and, in these cases, additional treatment is needed. Depending upon the toolkit you have at hand, you might either attempt a sander (with medium to coarse sandpaper) or a grinding disc. You should, however, act with extra care so as not to damage the stability of your old tiling.

Important: Constantly check for void behind old tiles. To do this, simply knock on each piece with your hand and listen out for hollow sounds. Areas with hollow area are simple to find, however beware– if you stop working to find these and tile over them anyhow, you risk of having your fresh tiles collapse in the relatively near future.

tiling tools

What tools will I require for a DIY tile setup?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Regular utility knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a comparable tool).
  • Pencil.
  • Measuring tape.
  • Drill.
  • Pins (to support the tile till the adhesive bonds and dries off).
  • Level.

Important: Make sure your surface area is always dust, dirt and moisture-free or there’s a chance your adhesive might not effectively bond.

For most kinds of masonry, ceramic and vinyl tiles will stick– but for wood surface areas, you’ll require to use a coat of paint or prime.

How do I prep drywall for a fresh tile installation?

Fresh drywall needs as much as a month before it’s ready for tiling, however when the time comes, you will not have to tape the joints. All you’ll need to do is apply a skim coat and sand. When done, tidy the surface area from dust, dry any signs of wetness and use the adhesive.

Important: For areas abundant with wetness, use water-resistant plasterboard.

How do I prep old drywall for a fresh tile setup?

It’s crucial to correctly assess whether the wall is strong and stable enough to hold the weight of fresh tiling. If you’re unsure, you must always request advice from a knowledgeable tiler.

Fill out any cracks or holes from pins, nails or any other type of wall fitting, use the guide, leave it to dry, sand one more time, and after that use the adhesive.

How do I prep the wall for tiles if the drywall is currently painted or textured?

According to experts, you need to apply PVA or make a DIY primer by including a bit more water to your adhesive.

After that, there are a couple of crucial jobs to take care of:.

  • Eliminate depreciated paint.
  • Repair fractures and holes.
  • If bumps are present, sand.
  • Clean the surface.
  • Ensure there are no signs of oil or grease.

Valuable idea: Treat the wall with Trisodium Phosphate (TSP). It’s a powerful cleaner, stain eliminator and degreaser– however keep in mind that this should, naturally, be kept well away from children.

How do I prep a plywood surface for fresh tiling?

The truth is that plywood appropriates for tiling your floors but not as useful when it comes to walls. The product is made of compressed wood mixed with different oils, which suggests that heat can impact it. If exposed to regular and dramatic changes in temperature level, tiles and grout will likely split.

How do I prep a wallpapered wall for tiling?

When it concerns walls, tiles use much more longevity and functionality than wallpaper, and the best alternative is to remove wallpaper any place possible. The most efficient and problem-free way is by exposing the room to steam– however this approach does include some risks. If you’re dealing with drywall or engineered wood by means of steam, the heats and moisture can potentially trigger damage which is typically beyond basic repair work.

Alternatively, you can merely wipe the surface area with a damp and warm rag. This way, moisture will not penetrate through to the substrate itself– but at the same time, the wallpaper will relax. Repeat the treatment a couple of times and utilize a scraper to peel everything with minimal effort.

When done, all you’ll require to do prior to using primer or adhesive is to make certain the surface is clean and dry.

You can set up new tiles on different surfaces, as long you prepare the wall properly. When appropriate preparation is done, you can quickly apply adhesive and stick your fresh tiles straight onto the wall.

Areas with hollow area are easy to identify, but beware– if you fail to find these and tile over them anyhow, you run the risk of having your fresh tiles collapse in the reasonably near future.

The truth is that plywood is ideal for tiling your floorings but not as useful when it comes to walls. When it comes to walls, tiles provide far more durability and functionality than wallpaper, and the best alternative is to remove wallpaper any place possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally complete in place in an array to cover roofs, floors, walls, edges, or new objects such as tabletops. Alternatively, tile can sometimes focus on to thesame units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In choice sense, a tile is a construction tile or similar object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of in flames clay.

Tiles are often used to form wall and floor coverings, and can range from easy square tiles to puzzling or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but further materials are also commonly used, such as glass, cork, concrete and extra composite materials, and stone. Tiling rock is typically marble, onyx, granite or slate. Thinner tiles can be used upon walls than on floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button