WHY CHOOSE Modern Tiling

There are numerous tiling companies in Dublin, however it’s constantly the most essential to trust and pick. Your single click when searching for “local tilers near me” online or calling somebody over the phone can help you find a tiler in Dublin. Choosing the right tiling system in Dublin can be an overwhelming task. The issue is who to call the Dublin tiling facilities. Do not believe all of you blindly. Modern Tiling might be the ideal choice for your tiling needs.

We are a licensed and certified tiling firm in Dublin. Having several years of experience and skilled business tilers in Dublin, we can enthrall the look of your location with our lovely ceramic tiles.

How to Prepare a Wall for Tiling (Detailed + Leading Tips).

tilers

Preparing your walls for a fresh wall tile installation is basic and hassle-free with our no-nonsense guide ready.

You can set up brand-new tiles on different surfaces, as long you prepare the wall appropriately. Just make certain the surface is level enough, and dust and dirt-free– which there are no indications of recurring moisture. When appropriate preparation is done, you can easily use adhesive and stick your fresh tiles straight onto the wall.

How to prepare for tiling a wall:.

  • Eliminate old fittings, such as pins, screws, rivets etc
  • Repair or remove unsuited plaster.
  • Eliminate or pre-treat wallpaper (if present).
  • Fix any fractures or indications of damage.
  • Level the surface area.
  • Sand, so that the adhesive can bond.
  • Ensure the surface area is grease-free, dirt and dust.
  • Choose the proper guide for your type of surface area.

Other crucial planning to do prior to you get going:

  • Procedure your square footage.
  • Find out the variety of tiles required for the task.
  • Purchase least 10% more tiles in case of damage during the installation. You might wish to increase the quantity to 20% or even 30% additional if you’re about to set up fragile patterns. There are no guarantees when it pertains to finding the very same batch, and even one that will carefully resemble what you purchased, further down the line, so this is highly suggested.

Ensure you have the best type of adhesive.

According to the professional tradesmen from Wonderful Tilers, less skilled Do It Yourself enthusiasts can utilize the ready-mix type of adhesive, however a professional tiler will always use the powdered service. It dries slower and therefore allows you to better adjust and align the whole wall tiling.

Helpful suggestion: When tiling kitchen area splashbacks or damp rooms, or setting up bathroom tiles in general, adhesive need to be water-resistant.

Make certain the wall is level or your tile installation might not succeed.

Tiling an unequal wall has the possible to lead to catastrophe. A simple way to find abnormalities is by putting something long and flat (i.e. a regular plank) on the wall and sliding it throughout. By doing this, you can determine any inflamed locations or bumps, should they exist.

An irregular wall can prevent adhesive from sticking– which could cause your entire wall setup to collapse. According to expert tilers, anything in between 3 and 6mm is still workable– but anything beyond that is most likely to cause trouble.

Its grip might loosen up– leading to undesirable problems even more down the line if you decide to apply a somewhat thicker layer of adhesive to compensate.

Different surfaces need different ways of preparation.

Some surfaces, such as a fresh drywall, require a minimum of a month to properly dry. Other cases, such as when you’re tiling on wood, require a coat of polyurethane paint. Make certain you have the right service for your particular wall and, whenever in doubt, seek advice from a professional tiler.

Tile board backers are a fantastic method to deal with irregular surfaces with very little effort.

A little costlier, tile board backers can assist you fix the problem– not to mention that these products are resistant to wetness, and can successfully avoid mould (which is known to grow on porous products in warm, moist conditions). This benefit makes tile backer boards an useful solution for showers, bathrooms and areas surrounding the kitchen area sink.

The one drawback of tile backer boards is that using such items will make your fresh tile setup a little bit more pricey.

Helpful tip: One essential thing to make certain of here is that the boards are well-mounted and durable.

Can you install brand-new tiles on top of old tiles?

Tiling over old tiles is possible– however it’s constantly much better to eliminate and retile.

The majority of tiles are too smooth for adhesive to properly bond and, in these cases, additional treatment is needed. Depending on the toolkit you have at hand, you could either try a sander (with medium to coarse sandpaper) or a grinding disc. You should, however, act with additional care so as not to damage the integrity of your old tiling.

Crucial: Always examine for void behind old tiles. To do this, simply knock on each piece with your hand and listen out for hollow noises. Areas with hollow space are easy to find, however beware– if you fail to spot these and tile over them anyway, you run the risk of having your fresh tiles collapse in the relatively near future.

tiling tools

What tools will I require for a Do It Yourself tile setup?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Routine energy knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a similar tool).
  • Pencil.
  • Measuring tape.
  • Drill.
  • Pins (to support the tile up until the adhesive bonds and dries off).
  • Level.

Important: Make certain your surface is constantly dust, dirt and moisture-free or there’s a possibility your adhesive may not appropriately bond.

For most kinds of masonry, ceramic and vinyl tiles will stick– but for wooden surfaces, you’ll require to apply a coat of paint or prime.

How do I prep drywall for a fresh tile installation?

Fresh drywall requires as much as a month before it’s ready for tiling, but when the time comes, you won’t need to tape the joints. All you’ll need to do is apply a skim coat and sand. Once done, clean the surface area from dust, dry any indications of moisture and apply the adhesive.

Essential: For areas abundant with moisture, use water-resistant plasterboard.

How do I prep old drywall for a fresh tile installation?

It’s essential to properly examine whether the wall is strong and stable adequate to hold the weight of fresh tiling. If you’re unsure, you ought to always request for advice from an experienced tiler.

Fill out any fractures or holes from pins, nails or any other kind of wall fitting, apply the primer, leave it to dry, sand one more time, and then use the adhesive.

How do I prep the wall for tiles if the drywall is already painted or textured?

According to experts, you ought to use PVA or make a Do It Yourself guide by including a bit more water to your adhesive.

After that, there are a few crucial tasks to take care of:.

  • Eliminate diminished paint.
  • Repair fractures and holes.
  • If bumps are present, sand.
  • Wipe the surface.
  • Make certain there are no indications of oil or grease.

Valuable tip: Deal with the wall with Trisodium Phosphate (TSP). It’s an effective cleaner, stain cleaner and degreaser– however keep in mind that this should, naturally, be kept well away from children.

How do I prep a plywood surface area for fresh tiling?

When it comes to walls, the reality is that plywood is appropriate for tiling your floorings but not as useful. The material is made from compressed wood mixed with different oils, which means that heat can impact it. If exposed to frequent and remarkable modifications in temperature, tiles and grout will likely crack.

How do I prep a wallpapered wall for tiling?

When it pertains to walls, tiles use far more durability and practicality than wallpaper, and the best option is to get rid of wallpaper any place possible. The most effective and hassle-free way is by exposing the space to steam– however this approach does come with some threats. The high temperature levels and moisture can potentially cause damage which is frequently beyond simple repair work if you’re treating drywall or engineered wood through steam.

You can merely clean the surface with a damp and warm rag. In this manner, wetness will not penetrate through to the substrate itself– but at the same time, the wallpaper will relax. Repeat the treatment a few times and utilize a scraper to peel whatever with very little effort.

As soon as done, all you’ll need to do prior to applying guide or adhesive is to make certain the surface area is tidy and dry.

You can set up new tiles on different surface areas, as long you prepare the wall appropriately. When correct preparation is done, you can easily use adhesive and stick your fresh tiles straight onto the wall.

Areas with hollow area are easy to find, however beware– if you stop working to spot these and tile over them anyway, you run the risk of having your fresh tiles collapse in the reasonably near future.

The reality is that plywood is appropriate for tiling your floors however not as practical when it comes to walls. When it comes to walls, tiles use far more longevity and usefulness than wallpaper, and the best option is to eliminate wallpaper any place possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally unmodified in place in an array to lid roofs, floors, walls, edges, or other objects such as tabletops. Alternatively, tile can sometimes tackle to similar units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In different sense, a tile is a construction tile or similar object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of passionate clay.

Tiles are often used to form wall and floor coverings, and can range from easy square tiles to puzzling or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but other materials are as a consequence commonly used, such as glass, cork, concrete and other composite materials, and stone. Tiling stone is typically marble, onyx, granite or slate. Thinner tiles can be used upon walls than upon floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button