There are several tiling business in Dublin, but it’s always the most essential to trust and choose. Your single click when looking for “regional tilers near me” online or calling somebody over the phone can assist you discover a tiler in Dublin. Yet selecting the best tiling system in Dublin can be a complicated job. The problem is who to get in touch with the Dublin tiling centers. Don’t believe all of you blindly. Modern Tiling might be the perfect option for your tiling requires.

We are a licensed and qualified tiling firm in Dublin. Having a number of years of experience and experienced commercial tilers in Dublin, we can mesmerize the appearance of your location with our gorgeous ceramic tiles.

How to Prepare a Wall for Tiling (Detailed + Top Tips).


Preparing your walls for a fresh wall tile setup is hassle-free and basic with our no-nonsense guide ready.

You can set up new tiles on numerous surfaces, as long you prepare the wall properly. Simply make sure the surface is level enough, and dust and dirt-free– and that there are no indications of residual wetness. When correct preparation is done, you can quickly apply adhesive and stick your fresh tiles straight onto the wall.

How to get ready for tiling a wall:.

  • Eliminate old fittings, such as pins, screws, rivets etc
  • Repair work or remove unsuited plaster.
  • Eliminate or pre-treat wallpaper (if present).
  • Fix any cracks or indications of damage.
  • Level the surface area.
  • Sand, so that the adhesive can bond.
  • Make certain the surface area is grease-free, dust and dirt.
  • Choose the suitable guide for your type of surface.

Other crucial preparation to do before you start:

  • Step your square footage.
  • Find out the number of tiles required for the task.
  • Buy at least 10% more tiles in case of damage during the installation. You may want to increase the quantity to 20% or even 30% extra if you’re about to set up delicate patterns. There are no warranties when it concerns finding the same batch, or perhaps one that will carefully resemble what you purchased, further down the line, so this is highly advised.

Make certain you have the ideal type of adhesive.

According to the professional tradesmen from Wonderful Tilers, less skilled DIY lovers can utilize the ready-mix type of adhesive, however a professional tiler will constantly use the powdered solution. It dries slower and thus allows you to much better adjust and align the entire wall tiling.

Helpful tip: When tiling kitchen splashbacks or damp rooms, or setting up bathroom tiles in general, adhesive must be water-resistant.

Make certain the wall is level or your tile installation might not be successful.

Tiling an uneven wall has the potential to result in catastrophe. A simple method to find irregularities is by positioning something long and flat (i.e. a regular plank) on the wall and sliding it throughout. By doing this, you can recognize any inflamed areas or bumps, ought to they exist.

An uneven wall can avoid adhesive from sticking– which might cause your entire wall installation to collapse. According to professional tilers, anything between 3 and 6mm is still practical– however anything beyond that is likely to cause trouble.

If you choose to apply a somewhat thicker layer of adhesive to compensate, its grip may loosen– leading to unwanted issues even more down the line.

Various surfaces require different means of preparation.

Some surfaces, such as a fresh drywall, need at least a month to appropriately dry. Other cases, such as when you’re tiling on wood, require a coat of polyurethane paint. Make certain you have the best service for your specific wall and, whenever in doubt, talk to a professional tiler.

Tile board backers are a fantastic method to deal with uneven surfaces with minimal effort.

A little costlier, tile board backers can assist you resolve the issue– not to mention that these products are resistant to moisture, and can effectively prevent mould (which is known to grow on porous products in warm, moist conditions). This advantage makes tile backer boards a practical option for bathrooms, areas and showers surrounding the cooking area sink.

The one drawback of tile backer boards is that using such products will make your fresh tile installation a little bit more costly.

Valuable tip: One important thing to ensure of here is that the boards are well-mounted and strong.

Can you install new tiles on top of old tiles?

Tiling over old tiles is possible– however it’s always better to get rid of and retile.

The majority of tiles are too smooth for adhesive to correctly bond and, in these cases, extra treatment is required. Depending on the toolkit you have at hand, you might either attempt a sander (with medium to coarse sandpaper) or a grinding disc. You should, however, show additional care so as not to damage the integrity of your old tiling.

Essential: Constantly examine for void behind old tiles. To do this, merely knock on each piece with your hand and listen out for hollow noises. Areas with hollow space are easy to spot, but beware– if you fail to find these and tile over them anyway, you run the risk of having your fresh tiles collapse in the reasonably near future.

tiling tools

What tools will I require for a DIY tile setup?

  • Paintbrush.
  • Paint roller.
  • Liquid waterproofing membranes (or plastic sheets).
  • Routine utility knife.
  • Stapler.
  • Mask and protective glasses (to keep you safe from heavy particles).
  • Gloves.
  • Straight edge (or a comparable tool).
  • Pencil.
  • Determining tape.
  • Drill.
  • Pins (to support the tile until the adhesive bonds and dries off).
  • Level.

Important: Ensure your surface area is always dust, dirt and moisture-free or there’s a chance your adhesive may not properly bond.

For most kinds of masonry, ceramic and vinyl tiles will stick– but for wooden surface areas, you’ll require to apply a coat of paint or prime.

How do I prep drywall for a fresh tile setup?

Fresh drywall requires as much as a month prior to it’s ready for tiling, however when the time comes, you will not need to tape the joints. All you’ll need to do is use a skim coat and sand. As soon as done, tidy the surface area from dust, dry any signs of moisture and apply the adhesive.

Essential: For locations abundant with moisture, usage waterproof plasterboard.

How do I prep old drywall for a fresh tile setup?

It’s vital to correctly examine whether the wall is strong and stable enough to hold the weight of fresh tiling. If you’re uncertain, you must always request recommendations from an experienced tiler.

Fill out any fractures or holes from pins, nails or any other kind of wall fitting, apply the guide, leave it to dry, sand one more time, and after that use the adhesive.

How do I prep the wall for tiles if the drywall is currently painted or textured?

According to professionals, you ought to use PVA or make a Do It Yourself guide by adding a bit more water to your adhesive.

After that, there are a few essential tasks to look after:.

  • Remove diminished paint.
  • Repair cracks and holes.
  • If bumps are present, sand.
  • Wipe the surface area.
  • Ensure there are no signs of oil or grease.

Helpful suggestion: Deal with the wall with Trisodium Phosphate (TSP). It’s an effective cleaning agent, stain eliminator and degreaser– but bear in mind that this should, obviously, be kept well away from kids.

How do I prep a plywood surface area for fresh tiling?

The fact is that plywood is suitable for tiling your floorings however not as practical when it comes to walls. The material is made from compressed wood combined with numerous oils, which indicates that heat can impact it. , if exposed to dramatic regular frequent significant in remarkable, tiles and grout will temperature level crack.

How do I prep a wallpapered wall for tiling?

When it concerns walls, tiles offer even more durability and usefulness than wallpaper, and the very best choice is to get rid of wallpaper anywhere possible. The most effective and hassle-free way is by exposing the room to steam– however this method does feature some threats. If you’re dealing with drywall or engineered wood via steam, the high temperatures and moisture can possibly cause damage which is typically beyond basic repair work.

You can merely clean the surface area with a warm and damp rag. In this manner, wetness won’t penetrate through to the substrate itself– however at the same time, the wallpaper will chill out. Repeat the treatment a couple of times and use a scraper to peel whatever with minimal effort.

As soon as done, all you’ll need to do prior to applying guide or adhesive is to make certain the surface is dry and tidy.

You can set up new tiles on different surface areas, as long you prepare the wall appropriately. When correct preparation is done, you can easily apply adhesive and stick your fresh tiles straight onto the wall.

Areas with hollow area are easy to find, but beware– if you stop working to identify these and tile over them anyway, you run the threat of having your fresh tiles collapse in the relatively near future.

The reality is that plywood is ideal for tiling your floorings but not as practical when it comes to walls. When it comes to walls, tiles provide far more longevity and usefulness than wallpaper, and the best alternative is to eliminate wallpaper any place possible.

Watch this video and learn how to tile kitchen wall

Tilers (WikiPedia)

Tiles are usually thin, square or rectangular coverings manufactured from hard-wearing material such as ceramic, stone, metal, baked clay, or even glass. They are generally total in place in an array to lid roofs, floors, walls, edges, or other objects such as tabletops. Alternatively, tile can sometimes refer to thesame units made from lightweight materials such as perlite, wood, and mineral wool, typically used for wall and ceiling applications. In unorthodox sense, a tile is a construction tile or same object, such as rectangular counters used in playing games (see tile-based game). The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of ablaze clay.

Tiles are often used to form wall and floor coverings, and can range from simple square tiles to mysterious or mosaics. Tiles are most often made of ceramic, typically glazed for internal uses and unglazed for roofing, but extra materials are then commonly used, such as glass, cork, concrete and new composite materials, and stone. Tiling stone is typically marble, onyx, granite or slate. Thinner tiles can be used upon walls than upon floors, which require more durable surfaces that will resist impacts.

Related Articles (Tilers)

Our Services

Around The Web(Tilers)

Call Now Button